How many skins do you need for a medium length fur coat?

Premium fur coat

Chinchilla fur coats are not available to all buyers. For example, a full-length mink can be bought for 100-150 thousand rubles, a sheepskin coat made of rabbit for 20 thousand rubles. A chinchilla fur coat will cost 60-80 thousand dollars - for most people this price seems excessive for an item that will last 2-3 years. This is an average figure, but in fact, cheaper models may turn out to be fake or made from skins of not the best quality.

What does a chinchilla fur coat look like? The photo below shows a true classic model: natural contrasting fur color from white to light gray and rich black. Such skin does not even need to be painted, although in rare cases the product is painted. But most often they prefer to leave everything natural, while more contrasting furs are considered the most expensive.

Why are people willing to pay that kind of money? The point is not only to show your status and financial viability, although this also plays an important role. It’s just that a chinchilla fur coat is very light, warm and airy, you can throw it directly over a thin blouse, and you will still be warm outside. No fur can compare with it; others, even if they are not inferior in terms of heat retention, are still many times heavier.

How to care

We remind you once again that this is a premium item. And if you already have enough money to buy a chinchilla fur coat, then even more so you can allocate a certain amount for professional cleaning. The thing is that the fur of this animal is not as durable as, say, that of a mink, and not as durable and durable as that of a beaver. Therefore, it is very easy to spoil it by careless handling; even removing excess moisture is recommended to be done with a special brush, having previously done these procedures on the reverse side of the lapels in order to eliminate the possibility of damaging the valuable skin.

And this is only in exceptional cases; the fur coat does not need to be wet at all, and it is not intended to be worn every day. It is rather a luxury item that is purchased for going out.

The influence of chinchilla keeping on fur quality

Animals raised for fur are kept on special chinchilla farms. The living conditions are very different from those recommended for apartment breeding. In order to raise healthy chinchillas with good fur, it is necessary to maintain a balanced diet, sufficient daylight hours, and also provide the rodents with the opportunity to constantly bathe in the sand. Nutrition plays an important role: the fur of animals suffering from overfeeding or underfeeding loses its valuable qualities. When feeding, it is important to follow simple rules:

• Use only special granulated feed,
• Avoid high-calorie foods
• Avoid fatty foods
• Use high-quality and clean meadow hay,

The daily intake of concentrates should not exceed 25 grams, hay or grass - 40 grams.

An equally important condition is compliance with a certain temperature regime. In the room where six-month-old animals are transferred, the temperature should be about +4 +6 degrees. The coolness is maintained for about two to three weeks. This is necessary for the animal to dress in a denser and fluffier coat. After three weeks, conditions are created for the fur to ripen: the temperature is raised to +10 +12 degrees, and the animals are kept at this temperature until slaughter - three to four months.

Mink

How many mink skins do you need for a fur coat? To correctly calculate the required material, in this case mink skins, you need to know the length and style of the planned model. If the model is shortened, then less, if extended, then more. The number of skins is influenced by the size of the animal itself and the quality of the fur. It is important that there are no defects on it. You will need more females than males as they are shorter.

Fur coats with more skins are valued higher. If 40 male skins are needed, then female representatives need 2 times less.

If the customer chooses a product design option with a collar, the quantity will be increased. The same procedure is performed when adjusting product sizes and taking into account the style.

A new thing made from mink will please its owner for many years, but to create your own fur coat, you need to count on financial investments. The described necessary parameters give an idea of ​​the labor intensity of the manufacturing process of such clothing, the selection of high-quality raw materials, which is reflected in the final amount to be paid.

Rabbit

How many rabbit skins do you need for a fur coat? When selecting rabbit skins, you should also pay attention to the gender of the animal. Males, like minks, are much larger than females and have a richer fur color. Females have another advantage: their fur is softer, more delicate, and color transitions occur smoothly.

Thus, to sew a fur coat from rabbit skins, you need an average of 27 skins of large rabbits (for a medium-length model of the classic style, size 42). When choosing a loose cut or longer length, you need to add some skins.

Modern techniques for processing and sewing fur products allow you to create attractive models. If earlier fashionistas may not have paid attention to such products, now they are happy to buy them. Designers have liked this kind of fur for a long time. He is not only beautiful, but also pleasant to work with.

Such fur can be easily dyed and processed using various textile methods. Fashion seasons are not complete without new products using this fur. The couturiers surprise not only with fresh design solutions, but also boldly use different decor (pleating, wedges, flounces). It is true that you can play with rabbit fur, changing not only the color, but also imitating other types of fur. Of course, many ideas require more raw materials, and this also needs to be taken into account. When calculating the required number of rabbit skins, both the size of the skins and the features of the cut are taken into account. The availability of fur is encouraging; it is not expensive, but attention is paid to some of the features described above, and the combined factors determine the cost of the product.

You can also calculate how many sable skins are needed for a fur coat or how many beaver skins are needed for a fur coat, using similar criteria.

A larger amount of material, its high cost, the complexity of processing and selection of colors, and the elimination of defects cannot influence the reduction in the cost of a fur coat.

Video review

To get a quality product, you need to carefully approach the manufacturing process. It is better if you turn to specialists at a fur salon for help. They will tell you what is the best thing to do in order to please yourself with a worthy new thing for the optimal amount.

Leave your comment:

Determining the quality of fur

Only animals with high-quality and mature fur are selected for slaughter. Determining the quality of fur is not difficult: the outer hair should be five to six millimeters longer than the down. High-quality fur is thick, without noticeable bald spots or bald spots. All hairs are of even length.

The quality of the fur does not depend on the color, but depends on its evenness and distribution. Chinchilla fur is most valued if on the tummy the stripe of color transition from light to dark is thin, with clear boundaries. The brightness and saturation of the color, its expression and even shine are also important.

An important point in determining the quality of fur is mature skin. You can identify it by color. To do this, you can blow on the fur or gently push it apart with your fingers: immature skin has a bluish, grayish or bluish tint. You will recognize ready and ripe skin by its light pink color, but if the shade of the rodent’s skin is red, the skin is overripe and will be more difficult to work with.

The fur of a rodent of the highest quality is distinguished by its thickness and density, uniformity of color.

If chinchilla skins have abrasions, the skin differs in color from light pink, the color has too bright zonations or is poorly expressed, the fur is faded or has bald patches - they are classified as second class. Such skins usually lose up to 40% in price.

Table: fur and approximate amount of whole skins

We have compiled a table with popular types of fur from which fur coats are made. Then they called the fur studio and asked questions about the number of certain animals for a fur coat for a slender girl weighing 55 kg and 180 cm tall.

And this is what we got. The variation depends on many nuances - for example, height and physique, product model and length. For example, to the knees or below, with or without a hood.

Chinchilla fur coat: customer reviews

We won’t talk about good reviews: any woman in such a fur coat feels like a queen, and those around her look at her the same way. It is also warm, light and comfortable.

But there are also many negative points:

1. Unreasonably expensive: chinchilla fur coats cost a lot, but they don’t last that long.
2. A large number of skins for sewing - for some this is a decisive factor in refusing to purchase.
3. Chinchilla fur coats quickly lose their appearance: guard hairs break off, the fur becomes greasy, and sticky areas appear.
4. It's a big risk to buy a fake.

Dressing chinchilla skins

Dressing chinchilla skins begins with removal, and here it is important that no fat, blood or water gets on the fur. Otherwise, the workpiece will be damaged. The removed skin is cleaned with the blunt side of a knife from remaining fatty tissue, blood clots, and films. Then it is laid out on a flat and clean surface and the tail and paws are aligned. After the skin is cleaned and smoothed, it is stretched on a frame to dry.

Typically, the drying process takes no more than two days at a room temperature of no more than +15 degrees. If processing is not planned immediately, then the skin can be placed in the refrigerator, where it will be stored for several months without loss of quality and integrity.

The processing process begins by preparing a mixture of nine parts salt and one part aluminum sulfate. The salt must be crushed - otherwise the crystals will scratch the delicate skin of the workpiece. The resulting mixture is mixed with fine sawdust from deciduous trees. If the skin is wet, increase the amount of sawdust. For normal skin the ratio is:

• Two tablespoons of a mixture of salt and aluminum,
• Four tablespoons of sawdust.

The resulting mixture is sprinkled over the entire skin. The blanks are folded skin side to side and left for six days in a cool room with good ventilation, but without direct sunlight. The skins must be turned over every two days.

After the allotted time, the workpieces are shaken and hung on the crossbars to dry for another three or four days. After which they are stretched on a frame and cleaned of sawdust and salt residues.

Finished chinchilla skins can be stored in a regular cardboard box. Fold them in pairs inside with the flesh and cover them with regular newsprint.

Features of the formation of chinchilla fur

Thick and beautiful chinchilla fur begins to form from the moment of birth. Newborn puppies are born fully formed, covered with baby fur, which may be unevenly distributed over the body. It is usually thicker in the neck and back area than on the tummy and sides.

At the age of three, puppies enter the first period of growing up: the fur becomes silkier, the skin is still fragile, but acquires elasticity. At this age, young animals undergo their first molt, which is accompanied by the production of melanin. At the end of the molt, the fur will take on its adult color and the skin will turn bluish.

Starting from six months of age, the period of fur maturation begins. Typically this period lasts about three to four months.

Young animals that are not intended for breeding are slaughtered at the end of the maturation period. Further cultivation is not profitable: the animals stop growing, there is a high risk of fur damage in games, as well as the appearance of skin parasites.