Thanks to their excellent characteristics, items made from fabrics with polyester fibers have gained immense popularity. Jackets made of bologna or polyester are widely in demand - they are low in cost, very beautiful, strong and durable. To ensure that these items do not lose their quality, it is enough to provide them with proper care and storage, and also know how to iron a jacket correctly.
Proven Methods
As a result of washing, any bolognese or nylon jacket becomes wrinkled. To restore its neat appearance, you can use one of the tips that experienced housewives willingly share. How to iron a polyester windbreaker:
- If the manufacturer has not left a prohibition on steaming on the product label, then you should use a steam generator. To do this, you need to set it up for continuous steam supply and bring the soleplate of the iron close to the fabric. Next, you need to run a directed stream along the jacket without touching it with a metal surface. The product is first hung on hangers and placed in such a way that it does not touch, if possible, any surfaces. Steamers have a special stand for this, but you can use the crossbar of a horizontal bar, for example, or a jamb above the doorway.
- Another option for ironing a polyester jacket involves placing it on an ironing board. The iron is heated minimally, and a damp cotton cloth is placed on the surface of the product. You should run the iron over it several times until the creases completely disappear.
- You don’t have to iron your raincoat fabric at all after washing if you dry it properly. You just need to gently squeeze the fabric with your hands, without twisting - just light squeezing. The remaining wet areas should be blotted with a terry towel, hung on hangers and all folds manually straightened out. This action can be repeated several times until the item is completely dry.
- There is another option without ironing. The jacket is hung on hangers, fastened with all buttons and zippers, and hung in the bathroom. The surface of the product should be slightly smoothed with wet hands. Now you need to open the hot water tap (boiling water is welcome). The door to the room must be closed tightly, leaving a couple of minutes for 15 - this should be enough to completely smooth the material. After this, the jacket should be dried at room temperature.
Steaming with boiling water
A budget-friendly, but not the easiest way to iron a holiday outfit is steaming over boiling water.
To perform this procedure, follow the instructions:
- To avoid damaging the dress, ask one person to help. He will hold the item so that it does not fall into the hot water.
- Boil water in a saucepan.
- Hang the product on a hanger or clothesline.
- Bring the wrinkled areas to the steam and hold for a few seconds to smooth out the fabric.
- Let the dress cool. Ready!
The danger with this method is that delicate fabric cannot be kept over steam for long, as there is a chance that it will shrink too much. After this, it is impossible to smooth it even with a steamer. In addition, holes may appear in the canvas due to hot steam.
If a girl performs this manipulation on her own, then there is a possibility that the item will fall into boiling water. An assistant will help hold the fluffy skirts so that they do not fall into the hot water.
Features of polyester fabric
For designers, this artificial material is particularly attractive because it allows you to create not only light blouses and sundresses, but is also perfect for sewing outerwear. The items are original, with excellent heat-protective and moisture-proof properties. In order for the appearance of your clothes to remain impeccable for as long as possible, you should carefully study the manufacturer’s recommendations - whether it is possible to iron nylon with an iron. The label always indicates the temperature for both washing and ironing a particular item.
In general, caring for things made of polyester is simple: they are easy to wash, they dry quickly, and their appearance is easy to restore.
The basic principles for caring for polyester, bologna or nylon jackets are as follows:
- choose a delicate wash cycle;
- water heating should be 40 degrees, in rare cases - 60;
- use detergent for synthetics;
- do not bleach products;
- turn inside out so as not to deform the fibers from the outside;
- rinse in warm water with vinegar added
- squeeze in a gentle mode;
- hang on hangers to dry;
- iron at minimum temperature;
- Iron the creases through a damp cotton cloth.
On a note! It should be remembered that polyester quickly ignites and melts, so it is important to observe the minimum temperature conditions when ironing the product.
What is possible and what is not?
When ironing your jacket, you must adhere to the following recommendations:
Before ironing, check the composition of the fabric.- If you are in doubt about the ironing temperature, you should start with the minimum temperature, increasing it gradually.
- It is forbidden to iron the product from the front side.
- During exposure to a steam generator, iron or steamer, you should not adjust the item to avoid getting a thermal burn.
- Do not increase the heating temperature higher than indicated on the product label.
- You cannot put on an item after ironing until it has cooled down.
Using an iron
How to iron a jacket? First of all, you need to study the label on the jacket. A crossed out iron categorically prohibits ironing; in this case, it is better to use one of the methods described above. If there is no prohibition, then here’s how to iron a bologna jacket.
To avoid the appearance of shiny places, which is especially noticeable on dark fabrics, you should iron the product through a cotton pad (many manufacturers offer special ironing irons). In addition, the iron often includes a special sole made of fluoroplastic.
On a note! Of all the materials, calico is best suited; in extreme cases, gauze. Synthetics are unacceptable, even with impurities. In addition, you should not use a spray bottle, as it may leave small specks on the fabric. The calico should be wet and wrung out well, this will make ironing easier.
You can only iron a clean item, otherwise dirt will eat into the fibers. Even if it seems that after rain or a long trip on the subway or train, the jacket looks clean - before ironing the polyester windbreaker, it is better to wash it first.
Original products with many decorative elements should not be ironed; it is better to use steamers or home methods.
We recommend:
How to iron curtains without removing them from the curtain rod
Ironing too often is harmful. It may cause deformation and discoloration.
A jacket with insulation should be ironed completely, and not just those places that are wrinkled. Otherwise, the insulation will be pressed unevenly.
How to clean a blazer
When taking a crumpled item out of the closet before smoothing it out, the question arises - how to clean a bologna jacket. They often get dirty and covered with grease stains and dirt stains. What products will be needed for cleaning:
- wet wipes. If these are not available, a regular or soft, clean cloth will do;
- stain remover When it is not at hand, purified gasoline will do the job;
- additional soap-based stain removers.
Attention! It is necessary to distinguish between refined and regular gasoline. It is necessary to use it cleaned, it does not leave stains behind. You can buy it at any hardware store - it is sold for refilling pocket lighters.
In order to begin cleaning, you must first smooth it out. This is done by shaking thoroughly. During this procedure, any remaining dust that may interfere with further cleaning is removed. Then you pick up a cotton wool disc, pre-soaked in gasoline. To avoid surprises that could be unpleasant, clean the cuffs from the inside out.
To remove a dirty stain, the area around it is moistened with plain water. This will prevent it from spreading to the sides during removal. Wipe around the circumference, from the edges to the center. Do not press on the cotton swab. This may damage the fabric. If you can’t remove it in one go, you need to let the stain dry, and only then clean it again.
After removing all stains and dirt, the Bolognese jacket must be washed by hand. Water should not exceed 30-35 degrees Celsius. The products used must be marked “for synthetic fabrics”. It is important to remember that Bolognese jackets do not tolerate bends and creases. As a result, they can be severely deformed when dry. You need to rinse thoroughly, then when drying there will be no streaks from the powder.
Ideally, after rinsing, the jacket should be hung by the shoulders on a hanger. Excess water will be carefully removed from the fabric without causing damage. In cases where insulation that takes up a large volume is used in the manufacture of jackets, it is necessary to read the care instructions. It's on the label. In some cases, if the material allows it, the item is blotted with a towel to absorb excess moisture. This is done in a strictly horizontal position.
Special fabric
Modern manufacturers often sew windbreakers from membrane fabric.
It should be understood that the membrane is a polymer film with microscopic pores. The thickness of this film does not exceed a tenth, or even a hundredth of a millimeter. But the main feature is in the pores, which have the ability to allow moisture to pass through only on one side, and on the other, to retain it almost completely. Thanks to this property, human skin breathes and sweat is removed outside.
The membrane does not exist as an independent material; it is “welded” to polyester or any synthetic fabric. The higher its technical characteristics, the stronger and lighter the membrane fabric is.
The structure of the fabric is destroyed under the influence of high temperatures. That is why it is strictly forbidden to iron it, as well as dry it using heating devices or near an open fire. Therefore, before ironing a membrane windbreaker, you need to look at the label.
We store it correctly
Often, ironing a jacket is not necessary if storage rules are followed. Creases and small folds often form due to improper care and maintenance of the product. In order not to think about how to iron a jacket with your own hands, you need to follow a few simple rules for storing things.
How to properly store a jacket:
- leave in the closet only on hangers, having first straightened all the folds;
- fasten all zippers and buttons;
- if it is impossible to store the jacket hanging, then you need to fold it (like a shirt) and roll it;
- To prevent clothes from becoming covered in dust, it is recommended to store them in a cover;
- before putting the jacket in the closet, it must be cleaned;
- Only completely dry products should be stored.
These simple rules will help not only maintain the shape of the jacket, but also extend its service life.
The video in this article will clearly demonstrate how to iron a wrinkled jacket.
As you can see, a jacket made of any material can be ironed at home. The main thing is not to overdo it and not end up with stains and holes on your favorite item. If the housewife still has doubts and does not want to take risks, then all that remains is to turn to laundry specialists for help.
Advantages of polyester fibers
What is good about polyester:
- easy to wash and dry quickly;
- resistance to stains;
- no deformation;
- good air conductivity;
- hardly wrinkles when worn;
- does not fade after washing and does not fade under ultraviolet light.
The material will remain unchanged for several seasons, the colors will be just as bright.
