How to paint a leather jacket at home with liquid, powder paint, aerosol, or folk remedies? How to properly dye a genuine leather jacket: tips and tricks

Leather has been popular for many seasons; not only outerwear, but also trousers, skirts, and dresses are made from it. Some people buy leather items in pursuit of fashion, while others value their practicality and durability. And although a jacket made of natural material can last for a year, over time its appearance deteriorates.

A leather jacket can easily be refreshed by tinting it a little (with black everything is simple, for everyone else it is recommended to choose a dye half a tone lighter than the original)

Faded color and minor scuffs can be easily hidden by painting your leather jacket. To breathe new life into an old item, you don’t have to resort to the help of dry cleaning or other specialists. You can revive your skin at home, spending a minimum of effort and money on the procedure.

Is it possible to dye a leather jacket?

Practice shows that leather can be painted, and you can extend the life of a leather product not only by sending it to a specialized enterprise for painting, but also at home. But for everything to work out, you need to take into account the characteristics of the skin, know and correctly use the secrets of home craftsmen.

You can dye your jacket at home without the help of professionals.

How to dye a jacket at home: tips

We have provided complete information above on how to dye a jacket with different dyes. But arm yourself with some more recommendations that will simplify this process or help you avoid unpleasant situations.

• If you can't stand the smell of vinegar, then use acrylic fixatives. They can be purchased at any specialty store.
• in one direction only . This will prevent the formation of divorces or chaotic transitions.
• Don't be alarmed if the sealer starts to foam or leave white streaks. After drying, the jacket will acquire an even tone.
• The fixative will extend the life of the paint, protecting it from fading and rubbing. But remember - you can only apply it to a dry jacket . Otherwise, the product will become sticky and be damaged.

Oil your jacket regularly to keep the leather soft and protected from the environment

• It is not recommended to use a brush when painting with store-bought paints, since the layer will be too thick and you will end up with obvious transitions between areas. If you can't find a sponge, use a piece of woolen cloth. Or each painted area needs to be carefully shaded.
• The jacket should only be dried naturally! Otherwise, the product may become deformed and even damaged.
• Don't try to radically change the color. This is impossible to do with dark shades, but a lighter tone can only be darkened a little. That is, change the shade. Dyeing is carried out to eliminate defects, and not to completely repaint the item.
• Regularly lubricate your jacket with Vaseline or any natural oils to keep the leather soft. It will also protect from environmental influences and add shine. As the easiest option, use hand cream.
• Store your jacket only on hangers and without plastic. Don't forget - the skin must breathe!

Types of staining

In order not to spoil your favorite item, you need to know how to dye a leather jacket at home. To renew a leather product, two types of staining are used: superficial and deep. Each has its own characteristics and requires strict adherence to the sequence of actions.

There are two types of coloring.

1. With surface paint, the paint is applied to the front side of the jacket, partially penetrating the structure. For processing, use any product that is suitable for natural material. It is possible to achieve the desired result only if simple conditions are met:
   degrease the surface with acetone;
2. apply paint in several layers;
3. dry well.
4. The deep type of painting involves a procedure that ensures that the leather surface is treated in such a way that the entire surface of the product is completely saturated with the composition. To do this, you need to prepare a container with a dye, immerse the item in the solution and wait for the required time recommended by the manufacturer. After this, place the jacket to dry in such a way that they do not lose their shape.

Attention! With the deep method, it is important to periodically turn the clothes over so that the entire surface is evenly painted.

With the deep method, the clothes need to be turned over.

Staining algorithm

The first step is to put the jacket on a mannequin or hanger. To prevent the skin from hanging in folds, you can place old towels under the shoulders, back, and collar. Painting on a horizontal plane is also acceptable, but it is not always convenient.

How to paint a black or any other jacket step by step:

• moisten a cotton swab in acetone mixed with water or alcohol and wipe the surface of the product - this will help remove the protective wax;
• Using a brush, lubricate the skin with a gelatin solution: dilute a tablespoon of powder in 250 ml of cold water, heat to dissolve the crystals;
• stand for 30 minutes, meanwhile preparing the composition for painting;
• Apply paint first to the most worn areas, and then to the entire surface.

It is important to carefully paint the seams on the sleeves, collar, and around the fasteners.

It is better if the leather jacket is painted at +16–20 degrees and normal air humidity - no more than 75%. It is recommended to open the windows in the room and keep the lighting bright.

Each type of paint for a leather jacket, black, brown or white, has its own nuances of use.

Drying time is individual, approximately it is indicated in the instructions compiled by the paint manufacturer. You cannot use a hair dryer or any other electric heat devices to speed up the process. Drying should take place under natural conditions.

Degrease the surface of the jacket

Apply gelatin solution with a brush, leave for 30 minutes

Paint the worn areas first, then the entire surface.

To speed up the drying process, do not use a hair dryer or heater.

Preparation for the procedure

Dyeing a leather jacket requires patience and attention. Before starting the procedure, it is necessary to prepare the product. The first and important step in this matter is the careful removal of various types of contaminants. They can be effectively removed by degreasing, using special or conventional products that are always at hand in any home. A soap solution with added glycerin is suitable for this. This mixture degreases well.

Before the procedure, the product must be prepared.

You can free your jacket from dust if there are no stains on it by carefully wiping the surface with a damp cloth. In addition, you should follow some rules that will help you get excellent results in the future:

1. the skin does not need to be heavily wetted - it is better to wipe it with a well-wrung-out cloth;
2. clean the surface carefully, without missing a single fold;
3. You can remove the soap solution from the surface with a clean sponge and water;
4. hang the prepared item out to dry in such a way that it does not lose its shape, and it must be placed away from heating devices and sunlight.

The surface must be cleaned according to certain rules.

Important! You can start painting the jacket only when it is completely dry.

The jacket can only be dyed when dry.

How to clean and prepare a leather product for painting?

You can’t just start dyeing a jacket without cleaning it from dust and dirt. Do not forget that such a thing cannot be washed in a machine. Otherwise, it will shrink in size and become rough.

Important: Products may already have a protective layer. Before painting it will need to be removed, otherwise the pigment will not set! To check this, lower the jacket or part of it into water. The protective layer will not allow moisture to penetrate into the skin.

• To remove the protective layer, you need to lightly rub the jacket with sandpaper. Just take fine-grained material and carry out the entire movement gently and carefully so as not to damage the skin itself.
• The sore spot of most leather jackets is ink marks. They can be removed with an vinegar-alcohol mixture. To do this, mix the components in equal proportions and wipe the required areas with a sponge.
• Also remember to remove grease stains. This can be done with gasoline or ammonia. Dampen a cotton pad and wipe the oily area well.

Note: Minor abrasions and scratches can be masked by orange juice. Squeeze a few drops of orange juice from the skin and wipe the skin area.

• Never soak your jacket completely! It just needs to be wiped with a damp sponge. The water should be taken only a little warm.
• You can buy special leather cleaners in the store or arm yourself with laundry soap. By the way, it contains natural ingredients and does not leave streaks on things. For 200 g of water you will need 20 g of soap shavings.
• You can also add 1 tbsp to soapy water. l. turpentine. Or use glycerin, but increase its dose by 3 times. Soak a sponge in this solution and wipe the jacket completely.
• For dark colors, the ideal cleanser is lemon juice diluted with water. The proportions should be taken in equal quantities. Also wipe the jacket with a damp sponge.
• Also be sure to walk around the inside. Wipe the lining with soapy liquid, adding 1-2 tbsp. l. ammonia. Its quantity depends on the degree of contamination.
• By the way, alcohol will degrease the surface of the skin and help improve coloring. Therefore, it doesn’t hurt to wipe the jacket with alcohol or an alcohol wipe.
• Dry the product in a well-ventilated area and only on hangers. This will help avoid deformation. Start painting after the jacket has completely dried.

Important: Do not forget about additional lighting in the workplace. This will help avoid sharp transitions or unpainted areas.

The jacket must be cleaned before painting.

How to choose a paint product

For skin restoration, you can find quite a lot of products on sale that guarantee high quality treatment and consolidation of its results for a long time. On the market, paint for leather jackets is presented in the following types:

• aerosol;
• liquid;
• powder;
• creamy.

Paints can be of different types.
Each of them has its own characteristics, and which one to choose is up to the owner of the jacket to decide. It is important to remember that a very cheap product does not guarantee quality. You shouldn’t buy very expensive paint; it’s better to stick to mid-price products.

Note! When choosing a paint, you must carefully read the instructions, take into account all the nuances of its use and the manufacturers’ recommendations, as well as possible restrictions on use.

You need to choose the dye very carefully.

Aerosol paint

There is no need to talk about what an aerosol can looks like. It is considered by many to be the most rational and convenient to use. With its help, you can regulate the power of the paint flow and determine the depth of its penetration into the skin structure. To apply a more durable paint layer, it is recommended to apply it several times.

Using an aerosol you can paint the product more evenly.

The aerosol is attractive due to its ease of use, as well as:

1. possibility of fast surface treatment;
2. effective when painting any type of leather;
3. the paint dries quickly enough;
4. does not require additional available tools;
5. has a large selection of colors;
6. belongs to the middle price segment.

Aerosol paint has a number of advantages.
No shortcomings widely noted by consumers were found.

Attention! When working with aerosol paint, it is mandatory to use personal protective equipment.

Liquid paint

There are differing opinions on whether this type of paint can be used at home to restore a leather jacket. Some people find it best suited for use in a home dye shop. Others argue that it is impossible to achieve absolutely even painting of the entire surface at home, which means that the product will be damaged and unusable.

Liquid dye is a little more difficult to use.

At the same time, it is impossible to remain silent about the positive results that can be obtained using it:

1. Having an acrylic base, it penetrates deeply into the skin structure and gives it a natural look;
2. can be used for any skin type;
3. it is possible to apply a glossy or matte finish;
4. has a wide range of colors.

Liquid cream paint penetrates deeply into the structure of the product.
If you need to paint a jacket at home, you need to do this carefully and carefully, strictly observing the proportions of the composition of the requirements and conditions for the procedure, the result can exceed all expectations: the surface will become smooth, will be resistant to the sun, rain and snow, temperature changes and mechanical damage .

Following safety rules, you need to wear protective gloves when working with liquid paint.

Attention! An even coloring can be achieved only if the leather jacket does not have deep abrasions or structural defects.

You need to work with liquid paint carefully.
Using liquid paint, you can not only restore a leather product, but also change its color.

Due to the complexity of the dyeing process, it is usually used by professionals - dry cleaning workers. The main disadvantage is its high cost.

Powder paint

Many people consider the use of powder to repair a leather jacket to be a rational and quite effective way. However, it has its own characteristics that must be taken into account when preparing the composition for work.

For painting to be successful, you need to properly prepare the solution:

1. the powder is dissolved in water in the proportions specified in the instructions;
2. the resulting solution must be heated to 95 °, then cooled to 45 ° C;
3. Immerse the entire leather jacket in a container of paint and leave for the required time, usually at least 2-3 hours.

Powder paint has its own characteristics.

Note! You cannot shorten the painting time, otherwise poorly painted spots will remain on the jacket.

The powder version ensures uniform coloring, but is less durable compared to the aerosol version. The main difficulty in using this type of paint is the need and procedure for preliminary preparation of the mixture for work. Greater care and attention is required in its preparation.

The powder must be added gradually, mixing thoroughly. The resulting solution must be filtered through several layers of gauze so that not a single lump remains, and then add water and bring its volume to the volume specified in the recipe.

Creamy

Cream paints are available in jars and tubes with a foam sponge included in the kit. They are more often used to restore shoes. As for clothing, it can only be used on things made of material with a smooth surface.

In addition, you need to take into account that cream paint is not suitable for updating the entire thing, but can only be used in certain areas of it in order to “cover” minor abrasions, cracks, scratches, which it copes with successfully.

It penetrates well into the skin tissue, but to consolidate the result, the procedure must be performed twice.

Creamy paint is used on selected areas of the skin.

Varieties

There are several types of paint for leather jackets. They differ in the main base substance, release form, and color palette. Each variety has strengths and weaknesses that should be taken into account before choosing.

In order to update the color in places and eliminate existing minor defects, you can paint the product with a liquid composition using a tube with a foam tip. This is the best option for spot local processing. It should be understood that choosing a color that will be identical to the tone on the jacket is quite difficult. To get rid of scuffs and remove scratches, you can use a creamy product based on oil or water. The first will make the surface of the jacket denser and tougher, and the second, in turn, will soften the texture of the leather and preserve its natural properties. To remove scratches and abrasions, it is enough to apply the treatment 2 times. If complete coloring of outerwear is required, it is better to use aerosol or powder formulations.

Aerosol

Liquid

Powder

Cream

Traditional painting methods

In addition to the goods that trade offers, some owners of leather products prefer to dye them using folk recipes, which are safe and practical. The components used for the procedure are quite accessible and not very expensive.

Note! Using traditional methods, you can only update your leather jacket, give it a fresh look, but you won’t be able to repaint it a different color.

Most of the recipes for restoring a brown jacket: this color is most often characteristic of it:

• rub a tincture of alder bark into the leather of the jacket, which will help restore the brown color of the product; a mixture of soda ash and potash, diluted with water and applied with a brush to the surface, will perform the same task;
• a thick rich brown color can be obtained using manganese;
• iodine gives brown leather a golden hue;
• fucorcin tincture diluted with water will give things a crimson tint;
• you can use stain if you need to lighten the product slightly;
• Henna dye will give a bright red-brown tint.

Various substances can be rubbed into the skin.
The following substances can be used to restore products of other colors:

• a weak water solution of iron sulfate to freshen a gray jacket;
• brilliant green will naturally help restore a jacket of a similar color; proportions with water - depending on the desired shade;
• Brewed black tea or ground coffee will give a delicate beige color to a yellow (not bright) jacket, and onion skins will give a golden color;
• the use of basma gives a color from green to deep black.

Depending on the color of the product, a specific composition is selected.
If the question is how to paint a leather jacket black, home craftsmen will come to the rescue, claiming that rich black paint can be obtained by pouring hot vinegar, or better yet, essence over rusty nails.

The cleanly washed and degreased metal is covered with an alcohol solution with a vinegar solution and left to infuse for two weeks. If the nails are not rusty, then three. Let stand until the smell of vinegar disappears, the finished mixture is filtered and used.

Berry juices, stamp paints and multi-colored inks are also used to restore leather jackets.

How to paint a leather jacket using liquid paint: instructions

Thanks to this paint, you can completely restore your jacket! By the way, all seams, pockets or other small and hard-to-reach parts can also be carefully painted. The choice of liquid paint is very impressive. But the main colors sold on store shelves are brown and black. All that remains is to catch the tone. But with bright shades there is a bit of a problem - you will need to order them only online.

• Some manufacturers' jars themselves come with a soft sponge. If you don’t have such a thing, then arm yourself with an ordinary kitchen sponge. And be sure to wear gloves!

Important: Give preference to oil-based paints! Or at least choose a composition close to natural ingredients. It is the oils that ensure the softness of the leather, the shine of the product and greater durability of the paint.

• A jacket usually requires 2 tubes, but it also depends on their volume. On average, a jacket needs 100-150 g of paint. Again, the degree of abrasion affects. Check the paint first on an inconspicuous area of ​​the product! If the shade is suitable, only then start working.
• It is necessary to pour the contents of the tube into an enamel or glass container . Under no circumstances should you take aluminum containers, since oxidation is possible. And this will ruin both the bowl and the paint.
• If you choose regular liquid paint, then add a couple of drops of castor oil. This will give extra softness to the skin after drying.
• Lay out the jacket on a flat surface, having previously covered it with paper or a waterproof cloth.

Rub the paint in a circular motion and don't forget to wear gloves

• Dip a washcloth into the paint and apply it to the jacket in small portions. circular movements .
• Take your time, carefully work through every centimeter. And make sure that the paint applies evenly and the tone is the same.
• It's worth going over areas that are too worn out twice. And what’s convenient is that you can easily paint the collar and cuffs.
• Next, hang the jacket on hangers and leave it to dry. When it's dry, go over the jacket with a dry cloth made of natural fabric to smooth out any rough edges. Liquid paint will take at least 2 hours to dry.
• If there is excessive shine from the paint, then you need to rinse with water and wipe dry. Or use a topcoat. It will also remove some excess shine.

Important: It is forbidden to dry the jacket near a radiator or with a hairdryer. High temperatures will cause the paint layer to crack.

• To ensure the paint adheres better, be sure to apply a topcoat . To do this you need to mix: 2 tbsp. l. salt;
• 5 tbsp. l. vinegar;
• 1 liter of water.

Dyeing can turn an old jacket into something new.

Painting stages

For folk recipes to “work”, it is necessary to carry out the entire dyeing process correctly:

1. Dilute the components with water to the desired shade, add dry ingredients with water, bring to a boil, then cool and strain;
2. Apply the solution to the prepared jacket in layers, actively rubbing it in with a brush, sponge or cloth swab;
3. Pay special attention to the cuffs and collar: they are always the most worn: paint should be applied to them in four to six layers at intervals of half an hour.

The painting process consists of several stages.
An easier way is to soak in the finished dye for at least 3-4 hours. At the same time, do not forget to turn the product over to avoid uneven coloring.

Note! Experienced home craftsmen advise using mink oil as a “fixer”. It will help slightly change the tone and protect the skin from salt, moisture, mold and cracking.

How to paint a jacket in the easiest way using an aerosol: tips and tricks

It is worth immediately noting that this paint is very convenient to use, a small amount of dye is consumed, and it covers the jacket with a very thin layer. Moreover, you yourself can easily control the thickness of the paint. But there is one drawback - it is only suitable for light touch-ups and requires regular updating.

• In addition to preparing the jacket for painting, you also need to choose the appropriate aerosol. Spray cans fill both store shelves and lists on Internet sites. Choose a suitable shade as the transitions may be noticeable. And keep in mind this regularity - a lighter jacket can be painted in tones slightly darker than the previous color.
• Consider the material of your jacket as well. The distribution of aerosols follows the same criteria. Sprays for suede, nubuck and smooth leather are sold separately. For a short jacket you will need at least 2 cylinders, and for an elongated item the consumption will double.
• Choose a suitable place - it should be a well-ventilated area . Ideally, carry out this procedure on the street. The cylinder often emits a pungent and unpleasant odor. And in a closed space, paint fumes can cause headaches and dizziness, as well as poisoning. It doesn't hurt to wear a respirator or disposable mask.
• And, of course, do not lose sight of the nuance that the spray can stain other objects around. Alternatively, you can use the garage, but lay out other necessary items first. Don't forget about the floor; it won't hurt to cover it with newspapers or polyethylene.
• Be sure to wear gloves! Unless you want to paint your fingers along with your jacket. By the way, sometimes such paint can cause burning and redness on the skin.

Important: If possible, seal zippers with duct tape. Otherwise, they will also become colored. But the buttons will need to be cut off. Otherwise, they will interfere with uniform coloring! If the buttons are tightly fastened, then cover them with tape and carefully outline them with an aerosol.

Spray painting should be done outdoors or in a garage.

• Hang your jacket on hangers. Moreover, make sure that no bends or folds are formed. This will negatively affect the quality of the painting. Also note that the bottom of the product should not touch the floor or other surface. Otherwise, it threatens to erase the paint from below. The minimum limit should be at least 20 cm from any surface.
• You need to keep the balloon at a distance of 20-25 cm . This will allow you to apply a thin and even layer. The closer you hold the can, the thicker the paint will adhere. And this can cause the formation of drips. Don't forget to shake the container first.
• Distribute the spray evenly over the jacket so that the end result is the same color. Don't stay in one area for too long. If there is a spot of a different color in any place, paint over it in a second circle. But the next layer can be applied no earlier than after 15 minutes.
• Particular attention should be paid to the armpits, collar and cuffs. It wouldn't hurt to paint the last two parts on the inside. To avoid damaging fabric areas, cover them with construction tape. It can be easily removed after the paint dries.

Important: Paint the jacket using the correct aerosol strictly from top to bottom! This will help to obtain a uniform color and avoid drips.

• Aerosols flow more than other paints. Therefore, after 30 minutes you need to walk a small piece of fabric (only velvet or velor is suitable) over the surface. This will remove excess paint. The jacket takes about an hour to dry. But take into account the manufacturer and the thickness of the layer.
• Although aerosols are now sold with water-repellent particles, it doesn’t hurt to apply a final layer. This will make the paint more durable. You can use store-bought fixative. But it is better to give preference to water-based preparations. Although it depends on your desire - whether you want your jacket to be matte or glossy.
• If there are any imperfections or cracks, go over such places with regular shoe polish (it is better to use colorless cream), furniture mastic or even wood wax. By the way, they also come in different colors. There is an even simpler method - use beeswax or paraffin.

Using an aerosol you get a thin layer that you can adjust yourself

Is it possible to repaint it a different color?

A leather jacket can be dyed a different color, but at home it is hardly worth experimenting with an item that is supposed to be used again. It is better to turn to the services of professionals. If the thirst for creativity overcomes its owner, you can try it on old clothes using liquid factory dyes.

At home, repainting a jacket a different color is unlikely to work well.

Paint selection

Preparation for the painting procedure begins with choosing a quality product. They are classified according to different criteria. Dyes are:

• Penetrating. They are absorbed into the deep layers of the material and are designed to completely repaint the product from color to color. Suitable for all skin types.
• Superficial. They have a thicker consistency. Effectively covers scratches, cracks, and small abrasions on smooth leather products. Such dyes are not suitable for aniline, exotic leathers (for example, crocodile leather), suede, nubuck, and velor.

Tip: To determine what type of skin you have, you can do a test with a drop of water. A drop of water is applied to an inconspicuous area of ​​the item. If the drop is absorbed and leaves a dark halo, then penetrating dyes must be selected for the product. If the drop remains on the surface, then surface dyes are suitable.

Paint release form:

• aerosol product;
• liquid;
• dry powder.

It is worth paying attention to the composition of the dye. It is best to choose a water-based product without toxic ingredients.

A good sign will be the content in the paint:

• Wax. It gives things shine, softens, smooths out cracks, and removes abrasions.
• Nut oils. It smoothes the surface.
• Olive or jojoba oils. They have nutritional and protective properties.
• Mink oils. It takes good care of the product.
• Seal oil , which has water-repellent characteristics.

Drying your jacket

In order for a leather jacket to find a “second life”, it is important not only to paint it well, but also to dry it properly. Be sure to consider:

• drying is prohibited in front of an open fire, in the sun or using various heating devices;
• it should dry naturally, blown by the wind, in the warm season;
• if this is not possible, it can dry well in a warm, well-ventilated (non-residential) room.

When drying a jacket, there are several rules to consider.

Where to dye a jacket?

There are several ways to improve the appearance of a leather product. This service is included in the list of specialized salons and dry cleaners. Professional treatment of the damaged surface of a product has a number of advantages. Using equipment, specialists can determine the following characteristics:

• degree of damage;
• material type;
• skin density;
• paint shade;
• possibility of changing color;
• suitable dyeing method;
• method of applying the protective substance;
• type of subsequent polishing.

In specialized salons, the jacket is first cleaned and defects are removed from the surface.

If your financial capabilities do not allow you to go to a dry cleaner, you can carry out the procedure yourself.
If it is not possible to use the services of professionals, you can update the color of your home. It is impossible to restore the surface structure yourself. In order for the item to have a neat appearance, you need to follow the rules of care. Your leather jacket will last longer if you follow these tips:

• Select a cleaning method taking into account the properties of the material. It is better to wipe soft leather with a slightly damp cloth or special detergent.
• Avoid drying in direct sunlight.
• Minimize temperature changes.
• Once indoors, immediately wipe off any remaining drops of water after washing with a dry cloth.
• Do not store the product in damp conditions.
• Dry away from heat sources.

How to care for leather products

Although leather is a durable material, it requires care and timely maintenance. Then products made from it will retain an attractive appearance for a long time, which includes:

1. impregnation with water-repellent preparations, which is carried out twice a month;
2. carefully drying wet items on a hanger or in a lying position, away from heating devices;
3. treatment with conditioner, which prevents drying of the skin, loss of color and maintains the fat balance in the product;
4. periodic use of products to maintain or restore shine.

Leather material requires some care.
Using these simple recommendations, you can give your leather jacket a “second life” and use it for a long time.

Painting a jacket using powder paint: instructions

This method seems both simple and complex at the same time. Using this method is not so difficult to paint as it takes a relatively long time to prepare the materials. Although the painting turns out to be the most thorough.

• Prepare the jacket properly and choose the right color paint. Soak the jacket in water for 2-3 hours to open the pores and allow the air to escape. Otherwise, the paint will come out in spots.
• Dilute the powder in a small amount of warm (!) water. Make sure there are no lumps. Therefore, add the powder gradually, mixing thoroughly. Strain the resulting solution through several layers of gauze and mix with 2 liters of water.
• Place the liquid on the fire and bring to a boil. Boil for 5 minutes and remove from heat. Cool to 35-40°C . Please note that the water should not be too hot, otherwise the skin will shrink and become rough. And this will affect its softness and elasticity.
• Place the jacket in the solution and leave for 3-6 hours. The time depends on the desired color saturation. Be sure to periodically turn over and wring out the product during this time! Otherwise there will be an uneven tone.
• After this time, take out the jacket and place it in clean water. Rinse the product thoroughly. This must be done several times until the water becomes clear.
• This method requires careful fixing. You can change the quantity depending on the required volume of liquid. It will require: 1 tbsp. l. salt;
• 200 ml vinegar;
• 1 liter of water.

After powder coating, rinse the jacket thoroughly

Selecting the right product

To repaint a leather jacket black or another color or restore an old one, a dye is needed. There is plenty to choose from. Knowing certain nuances will help you choose a product.

Suitable for home coloring:

• Liquid paints.

• Aerosols.

• Powder dyes.

The dyeing process using any of them is completed with the use of a special fixative.

Is a dishwasher profitable?

Oh yes! No

Which colors should you prefer?

Properties of important elements:

1. Wax included. It gives leather products softness and shine. Smoothes out cracks and abrasions.
2. Walnut oil. Makes the surface smooth. Some manufacturers use analogues in the form of petroleum jelly and glycerin instead.
3. Jojoba or olive oils. They have a positive effect on the skin, nourishing and protecting it.
4. Seal fat. Has water-repellent properties.
5. Mink oil. Protects and gives the product a well-groomed appearance.

A good dye does not have to be expensive. Before purchasing, you need to read reviews and study the composition of the product. Relying on consumer experience is the most reliable option.

The French company Saphir produces leather dyes; they are very popular due to their positive reputation.

Leather dyeing process

Features of choosing a dye

When deciding to renew faded clothing, you first need to study the composition of the material from which it is made. You can easily dye a jacket made of cotton, denim, or linen. But with synthetic fabrics you will have to tinker. Some synthetics cannot be painted at all - the paint simply flows off the surface of the product like water.

Polyester is often used as a synthetic material for outerwear. Jackets made from this fabric do not get wet, get dirty little, and last a long time. If the fabric is 100% polyester, it will be very difficult to dye. It is better when the material contains additional fibers such as cotton, linen, viscose, and the percentage of their content is at least 40.

Often, manufacturers of synthetic materials used for sewing outerwear treat the surface of the fabric with a special water-repellent composition. A thin protective film prevents paint from penetrating into the fibers of the material, which significantly complicates the dyeing process. The label always mentions the presence of such impregnation, so before starting painting it is very important to study all the information about your product.

The final coloring result is significantly influenced by the original color of the product. On the packaging of their product, the manufacturer always indicates the color that should be obtained after processing. We must remember that this only applies to dyeing white things. Otherwise, the result may be unpredictable. To paint colored items, it is better to choose a paint that is a shade darker.

Useful tips

When painting leather, be sure to take note of the helpful tips below. They will help you avoid mistakes that could result in permanent damage to the item.

• At the end of the coloring procedure, be sure to fix the color. We said earlier that you can use a vinegar solution for this purpose. If you are worried that your jacket will smell strongly of vinegar, then use a special acrylic fixative instead.
• It is convenient to apply dye to a leather product not only with a sponge, but also with natural wool.
• Before dyeing, a worn jacket must be cleaned of dust and other contaminants, regardless of what kind of paint you are going to use.
• Under no circumstances should you dye your leather a different color. If it was originally covered with black dye, restore the same shade. Otherwise, you can only worsen the condition of the leather jacket.
• You will not have to dye a leather product often if you do not wash it in the washing machine and send it to the wardrobe undried.

If you are sure that you will not be able to paint an old leather jacket at home, then it is better not to risk it and take the item to the dry cleaner. In any case, contacting specialists will cost less than buying new clothes. However, we are confident that you will succeed and in a few hours you will be trying on your favorite jacket again.

Types of paints

For the procedure, you should choose suitable coloring agents. The store will definitely help you with this, but you should know that there are several types of such products.

What to paint with?

The paint is available in liquid form, powder form, and you can buy an aerosol. Each method has its own advantages and disadvantages, and the process is different.

So first read the information on how to dye a leather jacket a different color using different products. This will help you choose the most convenient method, specifically in your case.

Stages of work

You should start applying the dye from the abrasions. This way it will lie more evenly. First, you need to assess the condition of the item and determine where the most abrasions are. They may be located:

• on the collar;
• on seams and external stitches;
• in the cuff area;

• on the front slats;
• on a belt or belt;
• in the upper back.

After treating areas with abrasions, the second step is to clean the entire surface of the product.

Workplace

Restoration of the product should be carried out in a clean and well-ventilated area. Preferably in daylight. The surface on which the work will be done must be covered with polyethylene or cling film.

Hand protection gloves

Required equipment:

• coloring agent;
• cling film;
• rags or paper napkins;

• trepmel;
• respirator mask;
• medical gloves.

It is important to protect objects and surfaces of the surrounding area in the painting area. It is best to use cling film.

The jacket must be hung on the trempel, buttoned up, to protect the lining material from paint.

Expert opinion

Irina. Housewife.

Ask a Question

Protect your face with a mask, and wear thin medical gloves on your hands; they are comfortable to work in. It's better to stock up on several pairs.