How to clean a mink hat at home? Features of the procedure

This article answers questions about how to clean a mink hat at home, and what folk remedies you will need for this.

A mink hat is a very valuable and beautiful headdress. Not everyone can afford it due to the high price. But if such an item appears in your wardrobe, you need to know how to care for it and how to clean it so that the item lasts a long time and does not lose its appearance.

Features of cleaning white mink hats

Fur products of light colors require special care. To clean them, you can use ordinary household products that every housewife has.

You can effectively clean a white mink hat at home using talcum powder and starch. These products remove grease and dust. It is necessary to sprinkle the fur with talcum powder or starch and carefully rub the hat with movements as if washing it by hand. Then leave the headdress for several hours. During this time, the cleaner will completely absorb all the dirt.

You can clean the product from residues using a clothes brush. You can also go over the hat with a vacuum cleaner turned on at minimum power.

Clean, dry fur should be carefully combed with a special brush. After all these procedures, the product will look like new.

Another effective way to clean white fur is with bran. You need to place the bran in a saucepan or metal bowl and heat it over the fire, stirring constantly. Grind the headdress as in the previous method. Comb out the cuts with a wooden comb.

How to clean a mink hat yourself at home

Many fashionistas believe that if a mink hat gets dirty, it is better to take it to the dry cleaner. They are partly right, since dry cleaning specialists have certainly done this more than once and know all the subtleties and nuances. But there are also disadvantages to such cleaning, since chemicals are used . Their frequent use can completely ruin an expensive item. It will lose its appearance or completely deteriorate.

The other half of the owners of mink hats argue that it is not worth spending your money and treating the hats with chemicals. You can clean a mink hat yourself at home, using products that are definitely available in every home, or you can buy them at the nearest store for pennies. Find out how to do it correctly from this video:

Wet cleaning a white fur hat

The most frequently asked question among owners of fur hats is how to clean a light mink hat at home using water. Wet cleaning of fur products can be carried out using washing powder. The required amount of wool detergent or hair shampoo should be dissolved in warm water. Beat the solution with your hands until foam forms. Collect foam on a foam sponge and apply evenly to the entire fur. Movements must be careful so as not to damage the villi.

After processing the product, the foam must be removed using clean water and a washcloth. Place the wet cap on a glass jar turned upside down so that it does not lose its shape. Leave to dry at room temperature away from the sun and heat sources.

As soon as the fur dries, it should be combed with a sparse brush.

Traditional cleaning methods

https://www.youtube.com/watch?v=vO9qDPv-Cfg

There are a huge number of different products for removing stains from fur coats or other fur products. Sometimes you need to urgently update your clothes, but there are no specialized solutions at home. In this case, available products will come to the rescue: ammonia, talc, hydrogen peroxide, vinegar or hair shampoo.

Talc is considered the safest cleaning agent for fur clothing of any color. It will absorb all the dirt, after which all you have to do is shake off the remaining powder. How to clean up vomit marks:

Use a damp cloth to carefully remove vomit, wiping the fur several times with a clean cloth;
generously sprinkle dirty areas with talcum powder;
rub the powder into the fur, shaking off the resulting lumps of talc;
Sprinkle the mink with talcum powder again and rub, repeat until the desired result is achieved.

Finally, you need to comb the fur coat with a fur brush, removing any remaining talc. Not only dirt, but also an unpleasant odor will disappear from the surface. The fur will become shiny and soft again.

Milk leaves greasy marks with an unpleasant odor on clothes. It eats into the fibers and does not disappear even after washing. You won’t be able to wash your fur coat, but you don’t have to put up with the bad aroma either. Ammonia will also remove greasy stains.

There are 2 methods of using ammonia. The first recipe is to mix ammonia and medical alcohol in equal proportions and treat the fur coat with a sponge. Second - pour 50 ml of ammonia into 500 ml of water and add 1 tbsp. l. salt. Mix everything thoroughly, shake and treat the mink. Regardless of the method, you need to dry your outerwear well and then comb it.

Shampoo

Shampoo for washing your hair is great for refreshing your fur coat. It cleans the material well, without harming fur products. How to use:

Dilute a spoonful of shampoo in a small amount of warm water;
foam the soap solution until a thick foam forms;
apply foam with a sponge to the contaminated area and rub in circular movements;
wipe the fur with a damp cloth;
Leave the fur coat to dry in a vertical position.

Hydrogen peroxide

White mink sometimes turns yellow over time, which spoils the appearance of the product. Unfortunately, not all special substances for treating fur can help in this case. Hydrogen peroxide will help and will safely clean the stains. You can use a simple method - generously moisten a cotton pad with 5% hydrogen peroxide and treat the pile.

If the entire product is damaged, it is better to mix peroxide with shampoo. How to clean a mink coat using this method:

pour warm water into a basin and add a few spoons of shampoo (suitable for pets);
foam the solution, pour in one bottle of hydrogen peroxide;
Apply foam to mink fur with a sponge and leave for 5-10 minutes;
Clean the fur coat with a damp cloth, but there is no need to wet it with water;
Leave outerwear to dry at room temperature, hanging on a hanger.

A more aggressive agent is ammonia and hydrogen peroxide. Helps against yellow spots left after eating. In a glass of water you need to dilute 3 tbsp. l. peroxide and 1 tsp. ammonia. Pour the prepared liquid into a spray bottle and wet the entire fur. There is no need to rub or impact the mink in any way, just dry the product. After a few hours, you can appreciate the difference: the mink coat will become snow-white again.

Even on a dark mink coat, oil stains from gasoline can remain, let alone light-colored items. It will not be possible to remove them with plain water or even shampoo; you should pay attention to more aggressive agents. One of these is table vinegar, which is used to wipe contaminated areas. Using a cotton pad, apply vinegar to the stains in the direction of growth and leave until dry.

After cleaning, the shine may disappear, but glycerin will help restore it. A few drops of the substance are applied to cotton wool and rubbed into the pile, and then combed out with a comb or fur brush. Glycerin can also be used for old vests, fur hats or collars that have lost their shine. It is important not to apply a lot of product, otherwise the surface will be greasy. You can simply rub a couple of drops of glycerin between your palms and walk over your fur coat.

Over time, products absorb grease, dust and odors. Natural absorbent substances, such as semolina, will remove them. It will remove plaque and give your snow-white fur coat a second life. It is recommended to lay the item on the floor or a large table so that the semolina does not fall off during cleaning. Generously distribute a small amount of cereal onto problem areas, and sprinkle a small layer over the entire surface.

At home, you can quickly and efficiently use many methods to clean mink fur yourself. But, in any case, you should act very carefully and carefully, because the skins of these animals are capricious things and will not tolerate careless treatment.

The most common, but no less effective, method of cleaning animal skins is semolina. This method is suitable if the fur coat is dusty from being worn for a long time, or is “tired” from hanging in the closet. We lay out the fur coat on a hard, flat surface, and sprinkle the most contaminated places with dry semolina (usually the dirtiest places are the sleeves, collar and pocket area). Then, with light movements, we imitate normal washing for 30-40 seconds. Shake the product and comb it out using a special brush.
Cleaning with starch occurs in the same way as cleaning with semolina. The color of the starch will tell you how dirty the fur was. It is worth repeating the cleaning with starch until the shaken off powder remains white - this will serve as proof that there is no more dirt and dust left.
Hot sand cleaning is also a gentle method of cleaning mink products. To do this, you need to take fine washed sand and heat it in a dry frying pan. Carefully lay out the mink fur product on a flat surface and sprinkle the most contaminated areas with hot sand. Wait until the sand cools down and carefully brush it out with a soft brush. If the sand is not completely combed out, lift the product and shake vigorously several times.
Another way to renew mink fur at home is to treat it with a brush dipped in gasoline. Gently, pressing lightly, comb in the direction of hair growth. Cleaning with gasoline is dangerous; it should only be done away from fire, in a well-ventilated area. After treatment, be sure to take the product out into the fresh air for several hours to thoroughly ventilate. But, if your fur coat is made of light material, this method will not work, since gasoline gives a yellowish tint.
Cleaning mink fur with vinegar is also common. A 5% solution of table vinegar is prepared, then a cotton pad is soaked in it, and the product is processed in the direction of growth. The dirt will remain on the disc, and the fur will sparkle with new colors.
If you need to clean light fur, then instead of vinegar from the previous recipe, use hydrogen peroxide, also 5%. After each treatment, change the disc, and after wetting, be sure to wring it out - if it gets on the skin, the solution can ruin it and cause the formation of bald spots.
Also, mink fur can be cleaned using ordinary ammonia. To prepare a solution of the required concentration, you need to take 4 tablespoons of water and one tablespoon of alcohol and mix well. Then you can moisten a cotton swab and process according to hair growth. Dry in the open air, never on a radiator or heater.
To clean serious stains, prepare sawdust from deciduous wood, mix with a small amount of pure gasoline and apply the slurry. After some time, carefully comb out with a soft brush.
You can also clean mink fur using regular hair shampoo. We dilute it in water, whipping up a thick foam, and then apply this foam using a sponge. Let sit for a few minutes, comb thoroughly and dry.

We suggest you read: Is it possible to wash ugg boots inside at home?

Cleaning fur hats from unpleasant odors

In fur hats, the lining is most often soiled. It comes into contact with the skin, hair and absorbs sweat and subcutaneous fat released by the body. The bacteria they contain instantly multiply, causing the lining to quickly acquire an unpleasant odor.

There are two ways to clean the inside of a mink hat at home:

Carefully flog the lining, wash it and iron it. Then sew it to the fur in its pure form.
If it is difficult to tear off the lining, then you can try cleaning it with a washcloth soaked in soapy warm water. After the procedure, the lining should be wiped with a dry cloth to remove excess moisture.

A solution made from ammonia or salt effectively removes unpleasant odors. Pour half a liter of water into a container and dissolve a teaspoon of one of the indicated products in it. Wipe the hat with the solution. Remove excess moisture with a towel and let dry naturally.

Removing stains from mink fur

The worst thing is when various household stains appear on a white fur product. The fur can be dirty due to carelessness with fatty foods or cosmetics. However, don’t get too upset and run to the dry cleaner. You can remove stains at home using cheap improvised means.

You can deal with many stains on light furs by wiping them with a washcloth and a solution prepared from 400 ml of warm water, a couple of tablespoons of salt and 1 teaspoon of 3% ammonia. After finishing cleaning, the products are additionally wiped with a clean, damp cotton cloth. This is necessary to completely remove any remaining ammonia solution.
Fresh greasy stains should be sprinkled liberally with any

Eating absorbent: starch, talc or baby powder. After some time, the powder is shaken off, and the pile is additionally wiped with a sponge dipped in a foamy soap solution. If it is not possible to completely remove the greasy trace, then it is treated with purified gasoline.
Highly purified gasoline is mixed with starch to a thick consistency. This composition is used to treat greasy stains. When the mixture is completely dry, it is brushed off.
You can clean a mink from stains by wiping them with cotton pads and a product made from 200 ml of water, 50 ml of alcohol and 30 g of salt. Having finished cleaning, pass over the pile with a damp rag or napkins and additionally treat it with glycerin (a couple of drops are needed) for shine.

How to clean stains from a fur hat

Without resorting to dry cleaning, you can get rid of stains on fur using household products. Experienced housewives share tips on how to clean a mink hat at home yourself.

You can remove yellowness with hydrogen peroxide. Add a tablespoon of peroxide to a full glass of water. Pour the solution into a spray bottle and spray over the contaminated area. To enhance the effect, dry the hat in the sun.
To remove greasy stains on fur, use vodka or medical alcohol.
A saline solution gets rid of old stains. To prepare it, you need to mix medical alcohol and salt in a 2:1 ratio in a glass. Apply the solution to the stain with a brush and wash off with a washcloth soaked in water.
A mixture of aviation gasoline and starch removes yellowness. The product must be left on the fur until the smell of gasoline disappears, and then knock the hat out with your hands. If yellowness still remains, you should repeat the procedure again.

What means can be used?

Shampoo is the most common way to make fur clean and fluffy:

take shampoo without conditioner and complex additives or wool washing gel;
pour 50–70 ml into water (2 l), beat into strong foam;
then apply it with a sponge to the surface of the hat, working the bottom, then the sides;
repeat the manipulations several times until the foam is completely placed on the headdress. It will absorb dirt;
Remove any residue with a clean cloth or napkin;
dry the hat on a can away from heating devices or direct sunlight.

If you don't trust shampoos, try other products. Here are the most common ones:

Soap – acts as a cleanser. The algorithm of work is the same as with shampoo. Choose soap that does not contain dyes or fragrances. High-quality baby or liquid soap is ideal.
Salt is an effective remedy for combating any type of pollution. Dissolve salt in water (1 teaspoon per glass), stir. Apply to the hat and let dry. Shake off the remaining composition. For effectiveness, you can add another 1 tsp to the saline solution. ammonia.
Sawdust has excellent adsorbing properties, which are used as a basis in this method. We apply heated sawdust to the surface of the hat - on each section in turn - thoroughly kneading the fur along with it, as if we were washing it. Then shake the hat, and comb out the remains with a wooden brush or remove them with a vacuum cleaner with a furniture attachment. You should only take sawdust from deciduous trees. Conifers contain resins that glue the fur fibers together. It will not be possible to comb the hat after them.
Starch absorbs dirt like a sponge. The product is sprinkled over the fur, the starch is lightly rubbed in. When it changes color and becomes slightly dirty, it is removed using the previous methods.
Talc – acts similarly to starch and gets rid of dirt or grease. Cover the hat with talcum powder, give it several hours to contact the fur, then remove the residue from the surface with a brush or wooden comb.
Alcohol will help remove stains. You need to moisten a swab in alcohol or vodka and treat the stain. Cologne, lotion, and other alcohol-containing liquids cannot be used; they leave yellow or brown stains.
A mixture of hydrogen peroxide and ammonia is an effective way to get rid of yellowness. Gently apply the solution (1 teaspoon of 3% hydrogen peroxide and 4-5 drops of ammonia per glass of water) onto the white fur with a cotton swab. Then comb and dry.

Important Tips

Before cleaning a mink hat at home, it is recommended that you familiarize yourself with the following tips:

When using natural products for cleaning, it is important to clean them thoroughly. If any remaining starch or bran remains in the headdress, moths may settle in it.
Do not soak a mink hat. Moisture can cause the core to become hard, and the product itself may shrink in size.
A damp fur hat should not be dried with a hairdryer.
When using perfume or other aerosol cosmetics, you should try not to spray it on your hat. Their composition may leave oil stains on the fur, and the fibers may lose their natural shine.
Stains should be removed while they are still fresh. Old stains are much more difficult to remove.
Cologne should not be used to clean white fur items. After drying, yellow stains may remain on the fur.

These are basic recommendations on how to clean a mink hat at home. Features of cleaning natural fur depend on its color. The lighter the mink, the more dirt is visible on it.

Washing and drying methods

The washing method directly depends on the type of material of the product. Quality items have special labels that tell you in detail how to wash and dry this item of clothing:

gentle washing (water temperature at the required degrees, without strong mechanical treatment, slow centrifuge speed during spinning);
delicate (lots of water, quick rinse, minimum mechanical processing);
hand wash only (no spin);
washing with water of a certain temperature (30, 40, 50 degrees or more).

You also need to dry things according to certain rules, which are indicated on the same labels. There are several types of drying things.

wringing and drying in a washing machine;
dry at the specified temperature (low, medium or high);
gentle spinning and drying;
delicate squeezing and drying;
vertical drying;
on a horizontal surface;
no spin;
drying the product in the shade.

Proper storage of mink hats

In order for a fur headdress to retain its original appearance for a long time, it is important not only to know how to clean a mink hat at home, but also to follow the storage rules:

A clean product should be stored on a cabinet shelf. You should definitely put a moth repellent near your hat.
Under no circumstances should mink hats be stored in boxes or drawers. A closed and poorly ventilated place creates favorable conditions for moths.
Frequently ventilate the closet in which fur hats are stored. It should be dry there.
The place where natural fur hats are placed should be protected from sunlight.
After each wearing, the hat should be placed in such a way that there is air access to its inside.