How to wash a pen from a silicone case

How to clean a matte phone case

Special products for difficult stains Eraser Soap solution Toothpaste Chlorine bleach Soda Lemon juice or vinegar Vegetable oil or petroleum jelly

How to wash a silicone case from dirt and yellowness

Liquid soap Soda Alcohol Nail polish remover Toothpaste Citric acid

A mobile phone or smartphone is an expensive purchase that you would like to use for at least 2-3 years without thinking about repairs. Therefore, we immediately buy accessories that will ensure better safety of the gadget. This applies primarily to phone cases. They not only protect the phone from dirt and scratches, but also give it individuality, because everyone chooses a case with a pattern that suits them best.

Some will buy a case with rhinestones and flowers, some prefer cartoon and movie characters, while others prefer laconic colors. But no matter what your case is made of or what is depicted on it, you need to take care of it from time to time. Cleaning should be selected depending on the nature of the contamination.

We'll tell you about effective methods that will help you wash phone cases made of matte plastic or colored or transparent silicone.

Do not miss

Do not miss
How to remove brilliant green from your skin: 16 ways to remove it from your face, body and hair

Rules for cleaning silicone products

You should remember several rules for using silicone cases so that they do not lose their appearance and functionality for a long time:

Do not keep the product in direct sunlight for a long time, as the color begins to fade.
It is necessary to select a case based on the phone model, otherwise the accessory may become deformed over time. In addition, you should not constantly put on and take off the product unnecessarily.
The case should be cleaned regularly with napkins or a damp cloth with a cleaning agent.
Aggressive chemicals should not be used, as they damage the appearance of the cover.

Important! You should wipe silicone products dry after cleaning, as traces of stains from water and detergents are clearly visible on the material. This measure also helps prevent the transparent silicone case from darkening. In addition, moisture remaining on the accessory can damage the gadget and render it inoperable.

General recommendations

Covers can be transparent, matte, colored or with prints. This feature should be taken into account when caring for them. The transparent silicone case is a budget option, but more convenient to use. It tends to get dirty quickly. To keep it in good condition, daily wiping with a damp cloth or a small cloth soaked in water is suitable. If the cover is darkened or yellowed, you need to use detergents or stain removers.

Do not use hard brushes, blades, or needles to remove dirt. Such cleaning methods leave scratches and cuts, which renders the silicone case unusable.

How to clean a silicone phone case

To wash the silicone case, both household chemicals and folk recipes are used. The main thing is to follow safety rules and work with protective gloves if aggressive solutions are used.

Soapy water helps to wash many surfaces without harming the material. To prepare the solution, you need to pour warm water into a container, add 2 tbsp. l. shavings of laundry soap and stir until the ingredient dissolves. Next, the cover is lowered into water and left for 1 hour. After soaking, the dirt can be easily removed with a soft brush or sponge under running water.

Stain remover

Since cleaning a transparent silicone case from difficult stains is not an easy task, you have to use special stain removers.

Before choosing a product, you need to pay attention to three rules:

Do not use chlorine bleaches.
It is not recommended to rub the silicone surface with abrasive substances.
Do not immerse the product in alkali, alcohol or solvent, as the item may be damaged.

Professional stain removers “Vanish”, “Boss” and “Frosch” are suitable for cleaning - they do not contain aggressive compounds. You can also purchase oxygen stain remover “Typhoon” or “OXY Color”. It is recommended to seek help from sales consultants, as they know the features of each product and can choose the appropriate brand.

Baking soda is found in almost every home; moreover, it costs much less than professional detergents. Despite this, its cleaning qualities are not inferior to household chemicals, and it does not harm products and does not leave streaks.

The protective accessory can be washed using the following ingredients:

2 tbsp. l. soda;
3 tbsp. l. detergent.

They need to be added to a pan of water, then put a cover in the solution and place the container on the stove. The product should be boiled for 5 minutes, then left for 30 minutes and rinsed.

Important! Do not use the pan in which food is cooked. Compounds produced when silicone is heated can leach into food and harm human health.

If dirt appears in places, you can rub the dirty areas with baking soda and rinse the cover with clean water.

Nail polish remover

This product removes various stains on silicone products well and does not harm the items themselves. For the procedure, you need to prepare a cotton pad, moisten it with nail polish remover and begin to wash off the stains. Then the cover is washed under water and wiped with a dry cloth.

Attention! The product should not contain acetone, as it can remove the paint from the silicone product.

The method is suitable for cleaning transparent cases, since low-quality nail polish remover can ruin the color and make it cloudy.

Alcohol-containing solutions

Regular care of the cover will help avoid serious contamination. To do this, you can use alcohol wipes: essentially, this is a material soaked in isopropyl alcohol. They are sold in sealed packaging, so the product does not evaporate during storage. Wipes degrease the surface of the silicone case and quickly remove traces of dirt.

Attention! If the silicone has a pattern made with low-quality paints, then alcohol wipes can ruin it.

The product can also be cleaned with a regular solution of alcohol and water: this will remove dried marks and degrease the silicone.

Gasoline for lighters

You should choose gasoline with a high octane number. You need to moisten a cotton swab in the liquid and wipe the contaminated area of the cover. Particularly difficult stains should be thoroughly wiped until completely removed. Next, you should treat the silicone with lemon juice or ammonia to get rid of the smell of gasoline.

Toothpaste

Many household products help clean silicone, including toothpaste. You need to squeeze a little paste onto the silicone, gently rub it into the contaminated parts of the product and rinse with clean water.

Advice. It is recommended to use a plain paste without abrasive particles. Colored inclusions can stain a light-colored case or scratch the surface.

Lemon acid

This product effectively and quickly removes dirt not only from silicone products, but also from fabrics, leather and fur. To clean the case, you need to take a plastic bowl, pour hot water (not boiling water) into it, then add a bag of citric acid. Place the silicone product in the solution and leave for 20 minutes. At the end of the procedure, the cover should be rinsed under running water or washed with a cleaning agent, depending on the severity of the contamination. It is recommended to regularly wipe the case with a solution of citric acid for prevention, as it degreases the surface of the accessory well.

Traditional methods

If there are no household chemicals at home, and pen marks need to be removed immediately, use folk remedies. They are less effective than store-bought chemicals, but they are easier to make, because most of the ingredients are always at hand. Among the popular folk remedies are:

dairy products;
hydrogen peroxide;
toothpaste;
alcohol;
lemon acid;
table vinegar;
salt and water.

Dairy

Dairy products allow you to remove pen marks from the surface of the skin quickly and effectively. Can be used:

regular milk;
spoiled milk;
serum.

The product is suitable for use on items that can then be washed in a machine. Algorithm of actions:

fill a small container with milk;
drop the stained piece of leather into it;
wait a few minutes;
wash it.

Toothpaste

Fresh marks from a ballpoint pen can be wiped off with regular toothpaste. Necessary:

apply toothpaste to ink;
wait 8-10 hours;
rinse off the paste with warm water.

Dark and colored surfaces may discolor after contact with toothpaste, so they must be handled with care.

Hydrogen peroxide

If you have a bottle of hydrogen peroxide in your first aid kit, use it to wash away contaminants. This substance dissolves ink without leaving a trace, without damaging the structure of the material. Procedure:

treat the skin with ethyl alcohol;
soak the cotton wool in peroxide and wipe the damaged area again;
rinse with warm water.

Alcohol

Alcohol dissolved in a small amount of water will allow you to quickly and effortlessly remove traces of ink that you carelessly left on your skin. Simply soak a cotton pad in the resulting solution and treat the damaged area.

After a few minutes, the item goes into the wash. If it was not possible to completely remove the trace, repeat the procedure again.

Lemon acid

Every housewife has a little citric acid in her kitchen, which can be used to easily erase fresh ink marks from leather and its substitutes. To do this you need:

take a clean piece of cloth;
treat the contaminated area with citric acid;
wipe it with a cloth;
wait a couple of minutes;
wash the skin with soapy water;
wipe off excess moisture.

Table vinegar

Table vinegar, in its effect, resembles lemon juice. To combat stains, simply wipe them with a cotton pad soaked in vinegar. Repeat the procedure until the ink disappears.

Salt and water

Fresh ink stains left on the skin due to carelessness can be erased with regular table salt. You will need:

wipe the area with a clean cloth soaked in soapy water;
sprinkle the treated area with salt;
wait a few hours;
After the specified time has passed, wipe off the salt with a damp cloth.

Glycerol

Products made of light natural leather, stained with a ballpoint or gel pen, are rubbed off with glycerin. Algorithm of actions:

take a piece of cotton wool and soak it in glycerin;
wipe the contaminated area until the ink completely disappears;
remove excess glycerin with a dry cloth.

Melamine sponge

A melamine sponge, covered with many small hairs, penetrates into the smallest cracks on the surface of the skin, cleaning them from ink. It is enough to moisten a sponge in a regular soap solution and gently rinse the damaged area. Foam formed during the cleaning process is removed with a clean, dry cloth. When working with a sponge, tiny particles of melamine can be separated from its surface, which are dangerous to human health. It is advisable to wear personal protective equipment in the form of a respirator and gloves.

Auto chemical goods

Auto chemicals often contain alcohol, which effectively destroys the structure of ink, removing it from leather surfaces. Simply apply them to the stain left by a leaking pen and rub thoroughly. In most cases, the mark disappears and no re-treatment is required.

Sulfur

You can quickly remove a pen mark left on a leather product by using sulfur coating match heads. Algorithm of actions:

moisten the mark with warm water;
treat it with sulfur. To do this, just rub the match head over the ink;
wipe the stain with a cloth soaked in soapy water;
remove excess moisture with a dry cloth.

White Spirit

An organic solvent that removes most types of stains, including those left behind by ink. The substance is aggressive, and before treatment it is advisable to check the skin’s reaction by dropping it in a place inconspicuous to the eye. If there is no negative reaction, the ink can be processed.

How to remove pen marks

You should carefully wipe off traces of the pen from the case, as they can easily be smeared on the surface. You can take a regular office eraser and rub it over the stained area.

Attention! It is better to choose a white eraser as it does not leave colored marks on the silicone.

Essential oil also erases pen marks: you need to apply it to a cotton pad and rub the stain until it disappears completely. In addition, baking soda and water mixed to form a paste help.

You can also use professional products for removing traces of ink, pens and felt-tip pens, which are sold at most office supply stores. Before use, you must read the instructions for use, since the algorithm of actions may vary depending on the brand of the product.

How to bleach a yellowed case

Silicone is a lightweight and inexpensive material that does not require special care. However, over time it loses its neat appearance and may turn yellow.

You can whiten silicone products in several ways:

Toothpaste. It is enough to wipe the yellowed areas with white paste and rinse under running water.
Alcohol. It cleans transparent cases well, but must be diluted in water before use.
Soda and ammonia. The components are mixed with water in the same ratio and applied to the product for 20-30 minutes. At the end of the procedure, the cover is washed in warm water and wiped.
Milk and protein. You should prepare a mixture of beaten white of one chicken egg and a small amount of milk. Using a paper napkin, apply the solution to the dirty area and leave until completely dry. After this, the dried product is cleaned off with a brush.
Onion. The juice of the onion helps against yellowness - the dirt will break down and it will be easy to remove. However, the onion smell will remain, but this problem can be solved with the help of wet wipes.

There are many ways to clean a silicone case, and you can combine them to achieve better results. However, you should remember the basic rules for caring for silicone and avoiding serious stains. When working with ammonia and gasoline, it is recommended to wear protective gloves, and if liquid gets on exposed areas, wash them under cool running water and soap.

Mobile phone is becoming an integral part of our lives. Now it is not only a means of communication, but also a navigator, organizer, and video camera. Like all other electronic gadgets, it requires careful maintenance. And this is where covers come to our aid. The most numerous and widespread of them are silicone.

The silicone case not only protects the phone from dust and dirt, but also improves the appearance of the device. There are a sufficient number of different models of cases in the retail network. However, silicone has one unpleasant feature. It literally, like a sponge, absorbs all the dirt, so it can be problematic to clean such a cover later. This is especially true for marks from a ballpoint pen or felt-tip pen. In addition, silicone is a very soft material that requires delicate care.

Or there is an even simpler option: buy regular wet wipes and wipe the case with them from time to time.

How to carefully remove regular and gel ink using improvised means?

It is important to prepare not only the products themselves with which you can erase the pen, but also a convenient applicator to apply them pointwise:

a thin brush with soft bristles;
cotton swabs for make-up - they have a special pointed tip on one side;
brushes for applying eye shadow with a sponge.

Potassium permanganate, vinegar and hydrogen peroxide

A great way to remove ink not only from a regular white sheet, but also from a lined sheet:

Dissolve several crystals of potassium permanganate in a teaspoon of 70% acetic acid.
Apply the resulting mixture along the contour of the letters.
There is no need to wait for it to dry: leaving it to react for 2-3 minutes, follow the traces of the solution with a brush moistened with hydrogen peroxide.
Iron the sheet through the fabric at a temperature of up to 110 °C.

A solution of potassium permanganate and vinegar does not dissolve printing ink, so the cells or rulers on notebook sheets will remain undamaged.

Acetone and nail polish remover

As a means to help get rid of pen marks, acetone and liquids containing it are often put in first place. However, in practice this method does not work.

Even the most careful spot application will cause the ink stain, diluted with acetone, to spread across the paper. The result is a completely damaged document.

Ethanol

You can only get rid of pen marks using ethyl alcohol on glossy paper. On regular paper, everything will turn out to be blurry ink and the inability to correct anything.

What to take:

cotton swabs with a pointed tip;
paper napkin or toilet paper.

Use a cotton swab soaked in alcohol to gently wipe along the outline of the letters. After each application, forcefully apply a napkin to the marks being erased. This will allow the ink to remain on the napkin and cotton swab. Glossy paper cannot be dried with an iron; it must be placed under a press and left until dry.

Soda, citric acid or juice, salt

A slight clarification of what is written is the maximum that can be achieved by using these means in any combination and sequence.

However, fine salt or baking soda with a little water makes an excellent abrasive that can completely erase a pen:

Pour soda or fine salt with water until a thick paste is obtained;
apply the paste to the inscription that needs to be removed;
Clean in a circular motion with light pressure until traces of the handle completely disappear;
shake off the abrasive, let it dry first under a press, then iron it through several paper sheets or napkins.

There are no traces of the pen left, and damage to the top layer of the sheet is insignificant.

Potato and corn starch

Starch will help to cope with the greasy and bright traces of roll-on or gel paste. This method will require quite a lot of time and will not help get rid of marks completely, but will serve as an excellent preparatory step for abrasive processing:

Dilute a few tablespoons of corn or potato starch with warm water to the consistency of thick sour cream.
Place some of the mixture on the inscription to be printed.
Wait until it hardens and carefully remove. Some of the ink will remain on the starch crust.
Mix the mixture in a container and place a new portion on the sheet.

Repeat until the pen mark no longer remains on the starch crust. Dry the sheet, complete the removal with soda or salt as an abrasive.

We clean the case using gentle methods

The first thing you can do is try to clean the case using a chlorine-free cleaner. You can use shampoo, toilet soap, or any liquid dishwashing detergent. Dissolve a little detergent in warm water and whisk until foam forms. Then place the case in the resulting liquid for 30-40 minutes. Then use a soft sponge to wipe the most contaminated areas and rinse with plenty of water. Now all that remains is to wipe the phone dry.

Eraser

You can try to erase marks from a ballpoint pen with a regular light eraser. Just rub the dirty areas with a dry school eraser. Then take a cotton pad, drop an alcohol-containing liquid on it (for example, industrial alcohol, cologne, or balm) and wipe the case.

Toothpaste

You can try to remove marks from a pen or marker with toothpaste. Take a silicone case, squeeze toothpaste onto it and spread it over the entire surface. After 20 minutes, wipe with a cotton pad. Toothpaste absorbs dirt and marker marks. To clean completely, repeat the procedure.

If the paste doesn't help, try shaving foam. Apply and wait 10 minutes. After this, remove with a cotton pad.

Baking soda

If after this it was not possible to remove all the dirt, then you need to add a few drops of water to the baking soda and apply the resulting slurry to the cover. There is no need to rub in baking soda, as this can damage the silicone. After the soda has dried, you need to shake it off the case and rinse it in cold water.

Alcohol

You can also try a non-aggressive method to wash the white or any other cover with industrial alcohol or vodka. Place a drop of alcohol on a cotton swab and try to clean the surface of the case.

Nail polish remover

Another common method for washing a case. This method must be used with caution, if you have a pattern on the case, it may be damaged. Or your case is not white, but colored.

Try practicing on the back or edge of the case first. Use a cotton pad with liquid to wipe the surface, then rinse with water and wipe dry.

We clean the case using aggressive methods

If the previous methods did not help, let's try to wash the silicone using more radical methods. It must be said right away that you risk ruining the silicone.

Boric acid and alcohol

For this method we need the following:

Liquid dishwashing detergent.
Borax (boric acid - sold in pharmacies).
Industrial alcohol.
Toothbrush with soft bristles.

Use a cotton swab dipped in technical alcohol to wipe the most contaminated areas of the cover. Then, add a little borax to the liquid dishwashing detergent and mix it all in a small amount of water. The cover should be left in the resulting solution for 60-80 minutes. Once the dirt has dissolved, you can gently clean the case with a toothbrush. Rinse with water and wipe dry.

Chlorine bleach or sandpaper

If none of the above methods failed to clear the dirt, then you can use a number of stronger cleaning agents. But you need to understand that using them can either clean the case or ruin it hopelessly.

Products that are recommended to be used only at your own risk:

Chlorine bleach.
Detergent with abrasive particles.
Fine sandpaper.

If the cover has changed its color or darkened over time, then, as a rule, it is unlikely that it will be possible to restore the original whiteness. Usually, low quality covers change color. Therefore, you should not save when choosing an accessory.

Useful tips

Some useful tips:

Silicone cases need to be washed as often as possible, because it is much more difficult to remove stubborn dirt.
Light stains can be removed with a regular eraser.
The brush for cleaning the cover must have soft bristles.
Cheap silicone cases quickly turn yellow and tear. In addition, they do not tolerate cleaning procedures well.
It is unacceptable for silicone cases to be exposed to open sunlight for a long time.
Sunflower oil will help remove sticky marks from the price tag or tape from the case.
You can try to remove lightly ingrained dirt using a melamine sponge.
Marker marks on the case can be removed with ether.

Use these simple recommendations, and such work as cleaning your phone case will not cause you much trouble, and its use will be long and enjoyable.

The video shows how to clean your tablet case:

Or there is an even simpler option: buy regular wet wipes and wipe the case with them from time to time.

Which covers do not turn yellow?

People who are concerned about yellow discoloration on cases should beware of brightly colored silicone clear covers and choose a different type.

Users who prefer only silicone may find darker colors such as black or navy blue.

Flexmat Case, Mercury Goospery and Forcell Carbon have many products available in deeper colors that won't yellow.

Yellowing will not be affected by wooden, leather, eco-leather and aluminum covers. Wooden ones are cases located on the back of the device, and among leather handbags you can find the “clasp”, “case” and “notebook” types.

The aluminum body is basically what you might call “armored bumpers” with a very robust design.

People who care about a clear case can choose a clear armored case made of durable polycarbonate. PC cases, such as the Spigen Ultra Hybrid series.

Due to the fact that yellowing is characteristic of silicone, when choosing a case from another material, we automatically get rid of the problem of discoloration.

This, however, does not mean that silicone is worse than other types, because each type has both its advantages and some disadvantages.

The phone case is definitely worth protecting with the chosen accessory, because smartphones are susceptible to numerous damages.

We clean the case using gentle methods

Eraser

Toothpaste

If the paste doesn't help, try shaving foam. Apply and wait 10 minutes. After this, remove with a cotton pad.

Baking soda

Alcohol

You can also try a non-aggressive method to wash the white or any other cover with industrial alcohol or vodka. Place a drop of alcohol on a cotton swab and try to clean the surface of the case.

Nail polish remover

Another common method for washing a case. This method must be used with caution, if you have a pattern on the case, it may be damaged. Or your case is not white, but colored.

Try practicing on the back or edge of the case first. Use a cotton pad with liquid to wipe the surface, then rinse with water and wipe dry.

We clean the case using aggressive methods

If the previous methods did not help, let's try to wash the silicone using more radical methods. It must be said right away that you risk ruining the silicone.

Boric acid and alcohol

For this method we need the following:

Liquid dishwashing detergent.
Borax (boric acid - sold in pharmacies).
Industrial alcohol.
Toothbrush with soft bristles.

Chlorine bleach or sandpaper

Products that are recommended to be used only at your own risk:

Chlorine bleach.
Detergent with abrasive particles.
Fine sandpaper.

Features of the material

Silicone is a polymer obtained from the chemical bond of oxygen and silicon molecules. Due to its environmental friendliness and wear resistance, it has gained wide popularity in various fields of human activity.

The material has such advantages as:

strength;
ease;
durability;
flexibility;
density;
safety.

The listed qualities make silicone phone cases very convenient, because they do not crack like plastic products and do not look bulky like leather “books” or metal covers.

However, silicone also has disadvantages:

ability to quickly absorb dirt;
color change under the influence of external factors, especially if the product is light;
tendency to cloudiness;
oxidation upon contact with air.

Of course, silicone cases are durable, but due to these features they lose their beautiful appearance very quickly. Luckily, phone accessories can be cleaned and brightened. If one method does not help achieve the desired effect, it is worth trying several.

Useful tips

Some useful tips:

Silicone cases need to be washed as often as possible, because it is much more difficult to remove stubborn dirt.
Light stains can be removed with a regular eraser.
The brush for cleaning the cover must have soft bristles.
Cheap silicone cases quickly turn yellow and tear. In addition, they do not tolerate cleaning procedures well.
It is unacceptable for silicone cases to be exposed to open sunlight for a long time.
Sunflower oil will help remove sticky marks from the price tag or tape from the case.
You can try to remove lightly ingrained dirt using a melamine sponge.
Marker marks on the case can be removed with ether.

Use these simple recommendations, and such work as cleaning your phone case will not cause you much trouble, and its use will be long and enjoyable.

The video shows how to clean your tablet case:

Pollution prevention

To protect the case for mobile equipment from contamination and extend its service life, you need to follow several rules:

It is advisable to choose high-quality accessories, they will last longer;
It is recommended to clean silicone cases monthly, plastic cases – once every 2 weeks;
the longer you delay removing contaminants, the more difficult it will be to clean them;
do not leave the phone on the table when writing or eating - this will protect the pad from the appearance of stubborn stains, and the device itself from damage;
Do not leave silicone covers near open fires, heating appliances or in the sun. This contributes to cloudiness and the appearance of yellowness;
Overheating of the gadget often leads to the same effect, so it is advisable to prevent the battery temperature from increasing;
with frequent removal, the lining is deformed, stretched and, as a result, does not adhere well to the device, losing its protective properties;
The white accessory absorbs the dye from the clothes it is in. Therefore, it is not recommended to put a phone with such a lining in the pockets of jeans or black clothes;
choose a case that fits the phone in size and fits tightly to it.