Knitted leg warmers came into our everyday life from sports. They are convenient for playing football, aerobics, and yoga. Leg warmers are essential for dancing. Buying leg warmers in your size can be difficult. We suggest you knit leg warmers with knitting needles. A variety of stylistic and color solutions will allow you to choose the best option for yourself. Leg warmers can be knitted from dense threads in a simple pattern for beginner craftswomen - then they will warm your legs in frosty weather. You can knit original openwork ones, or there are models in ethno style.
Simple and warm
Let's start with the simplest model. These socks are useful for dancing and playing sports.
Their length is 40cm.
We will need:
- thick yarn of mixed composition with a predominance of wool;
- set of sock knitting needles No. 3.5-4.
Pattern used: rib 3k.x2p.
Knitting density: 22p. for 30r. correspond to a square of 10 cm by 10 cm.
Description
We dial 60p. and knit in a round 40cm. Close the loops according to the drawing.
Video lesson:
Leg warmers for a three year old girl
The girl's leg warmers are knee-deep. For production, Alize yarn was used, consisting of cotton in half and acrylic. It is possible to use wool yarn, the length can also vary - above the knee.
The leg warmers are decorated with a pattern in the form of braids, which is quite simple to make. To make the leg warmers hold better, there are knitted ties with plastic balls in the upper part. Let's look step by step with a video on how to knit these beautiful things.
You will need double needles and circular needles with a diameter of 4 mm. We will start the work with an elastic band, which occupies seven rows, then comes the turn of the pattern, for which a detailed diagram is proposed.
Striped
To work you will need:
- gray yarn of mixed composition (50g per 200m) – 100g;
- dark gray yarn of mixed composition (50g per 200m) - 50g;
- set of toe knitting needles No. 2.5.
Patterns used:
- elastic band 2 knits x 2 purls;
- persons satin stitch: when knitting in the round, knit all stitches;
- openwork: knitted according to patterns A, B, C. In even rows we knit all the loops and yarn overs.
You need to repeat rapports in a row - see diagram.
Knitting density: knitting. Ch.: 30p. by 42r. correspond to a square of 10cm by 10cm, on openwork: 26p. for 42r. correspond to a 10cm by 10cm square.
Description
We dial 72p. gray threads and switch to circular knitting, distributing all the loops into 4 sp. - 18 on each. Next we knit 10 rubles. rubber bands, 1 rub. knit, 12cm openwork - pattern A (we finish with the 6th or 12th row of the pattern). Then - 5 rubles. rubber bands. Change the thread to dark gray. We knit 1 p. facial, 5 rub. rubber bands, 12cm openwork - pattern B, 5r. rubber bands. We return to gray again. We knit 1 p. with this color. facial, 5 rub. rubber bands, 1 rub. knit, 12cm openwork - pattern C (we finish with the 8th or 16th row of the pattern), 10 rubles. rubber bands. We close the loops.
Tips for beginner knitters
Before you start working, you should decide on the model that will be knitted or crocheted. For beginning needlewomen, you can start with a model knitted on two knitting needles using a pattern you made yourself.
The simplest version of the model is leggings knitted with front and back loops along the front and back sides, respectively. The finished product is sewn together by folding each piece in half, inside out.
In addition to knitting on two needles, there is a technique for working with 5 small sock needles, which are usually used to knit socks. A beginner will also be able to master working with 5 knitting needles, since when knitting in this way there is no need to knit the heel.
The advantage of this knitting technique is that the product is obtained without a seam. While working, you just need to correctly add a certain number of loops so that the side that was at ankle level is narrower than the upper part, which is at calf level.
You can knit such socks in a circular pattern using a hook, using patterns with a pattern. Those who already know how to knit can choose a more complex pattern of leg warmers with a jacquard pattern or with cables.
Classic leg warmers are usually knitted with an elastic band along the entire length if they need to fit the leg tightly and look like knee socks. There are loose-fitting models on which a complex pattern is knitted with threads of other shades.
Advice! Beginners should start with simple patterns that are knitted from the same color yarn and do not require complex transitions when knitting. While a novice needlewoman has not yet gotten the hang of it, her loops may turn out to be different sizes during transitions, which will negatively affect the product itself.
Novice needlewomen should put off the never-out-of-fashion leg warmers with vertical braids until better times, and it is better to start learning with a simple model knitted with knit and purl loops. Having knitted such a simple product, a beginner will master:
- techniques for knitting basic loops used in hand knitting;
- learn how to set and launch an edge;
- gain experience in adding and decreasing stitches in the fabric;
- learn how to stitch the finished fabric correctly if the knitting is done on two knitting needles.
There are different patterns for knitting or crocheting leg warmers. Beginners are advised to choose simple patterns with alternating knit and purl stitches in the same order.
For knitting such a sock without a toe and heel, medium-thick yarn is best suited. Gaiters made from too thin yarn will not stay on the foot, and products made from thick threads will look rough and will not fit into shoes.
Leg warmers with frills
Such beauty can be knitted for both young women and children. We simply reduce children's sizes proportionally.
To work you will need:
- gray yarn of mixed composition (50g per 130m) -200g;
- some purple threads;
- set of toe knitting needles No. 3;
- hook No. 2.5;
- additional circular knitting needles.
Description
We dial 84p. and switch to circular knitting, distributing 21 stitches. on a knitting needle. Let's knit 12 rubles. rubber bands 1l.x1p. In the next row we knit 2 stitches from each stitch. We remove each added stitch onto an additional knitting needle - we will knit frills from these loops. We continue the main knitting 3p.x1p., adding 1p. on each sleeper (i.e. we have 22 points per sp.).
Having knitted 7cm, we repeat the increase as described and remove the additional loops. sp. Having knitted 3.5cm 3L x 1P, we begin to make decreases: in every 8th p. decrease evenly in 3 stitches, knitting from 2 stitches. one front one. Having knitted another 3.5 cm, we repeat the increase on the frills and the removal of the loops on the additional one. sp. We repeat 2 more times, 7 cm each with decreases (see above), removing the item for the frills. We get 5 frills. After the 5th we knit 12 rubles. 1L x 1P and close the loops.
Frills
Let's knit in a circle of faces. satin stitch Starting from the second day. in every 3rd r. we make increases by knitting from 1p. - three. We must knit 10 rubles, three of which with increases. Distribution of additions: for the 1st and 2nd frills we make them every 3rd row, i.e. 6 increases; for the 3rd and 4th frills - in every 3rd r., i.e. 5 increases; for the 5th frill - in every 3rd r., i.e. 4 increases. We tie the edge of the frills with purple thread in single crochet stitches. To give the product its shape, it needs to be lightly steamed.
Video lesson:
How to knit leg warmers
The leg warmers are knitted in a voluminous but easy-to-make pattern. Above and below the pattern are 2 x 1 elastic bands. Five knitting needles were used for knitting. We start knitting from the top elastic band, for which we cast on 54 loops. When distributing the loops across the knitting needles, two end up with 14 loops each, and two end up with 13 loops each.
After completing the elastic band, we begin to knit a beautiful relief pattern, the construction of which is discussed in detail in the video tutorial. After the pattern, the bottom elastic band is knitted, and all that remains is to tuck the threads that remain after knitting into the knitting. The leg warmers are ready, and you can try them on and see how they look on your feet.
Leg warmers in ethno style
These knitted socks for women are made with folk Tyrolean motifs. They go perfectly with high heels.
We will need:
- h/w yarn of black, milky, bronze, white, sand colors - 50g of each (50g per 100m);
- sp. No. 4;
- markers;
- needle with a large eye;
- buttons Ø 20mm – 14 pieces.
Finished dimensions: length - 53.5 cm (stretched), volume at the widest point - 35.5 cm.
Knitting density: 21p. for 28 rub. correspond to a 10cm by 10cm square. Before work, it is recommended to perform a sample according to cx. 2 – check the length.
Description
Left
We cast on 75 stitches with bronze threads and knit 32 rubles. according to cx. No. 1 with straight fabric.
Knitting the next row on the wrong side. side, mark it with a marker and close it for circular knitting. Ignore the mismatch of the pattern at the joint. A button placket will hide this flaw.
Knit faces. satin stitch 9.5 cm. Knit 5 times in cx. No. 2 20 rows of rapport, decreasing 9 times at the end of every 10 rubles. 1 p. We will have 57p left. We continue to knit 15 rubles. according to cx. No. 3 at 57p. (the first is the edge one).
Bottom cuff
Knit 4cm of elastic band 2L x 2P. Close the loops.
Button placket
On the front side, using bronze threads, starting from the bottom cuff, below the decrease line, cast on 102p. We complete the set at a height of 2.5 cm of the top drawing cx. No. 2. Having knitted 4cm strips, close the loops. Carefully sew the edges of the strip. Sew buttons at equal intervals. If you couldn’t find buttons exactly matching the color of the threads, don’t worry - you can crochet them with the necessary threads. Sew the top cuff from the inside.
Right
We will knit according to the same description, except for the strap. It is more convenient to knit it from top to bottom: that is, we start the set with 2.5 cm before the first repeat of cx. No. 2. We dial 102p. and connect according to the previous algorithm. We design the right one in the same way as the left one.
Video lesson:
Leg warmers with ties
The leg warmers were knitted for a leg volume of 36 cm at the shin with a length of 32 centimeters. An elastic band is knitted at the top and bottom, the leg warmers themselves are decorated with a beautiful relief pattern, the upper part is additionally tightened with a knitted cord. For knitting, five 3-millimeter needles are used, with which the product is knitted in the round, without a single seam. Oxford threads made from 100% acrylic were used.
Knitting begins with the formation of a 2 x 2 elastic band, then a pattern is created in the form of voluminous braids. Throughout your knitting, it is advisable to keep a notebook in which you write down how many rows you knitted, so that you can then reproduce the same pattern on the second, paired item.
Knitted leg warmers made from “grass”
Cute little white knitted socks look very original and are easy to knit.
To work you will need:
- plain white mixed yarn - 100g;
- white “grass” yarn – 100g;
- set of socks No. 3.5.
Patterns used:
- elastic band 2 knits x 2 purls;
- purl satin stitch: when knitting straight - in faces. rows, all loops are purl, in purl. rows - facial ones.
Description
Cast on with a smooth thread 42p. and tie an elastic band 3cm high. We switch to “grass” threads. Having knitted 2 p. from it. satin stitch, change the thread to a smooth one and knit 4p. Alternating the threads in this way, we knit 25cm in height. Then we knit 3 cm 2l.x2i with a smooth thread. We close the loops. We carefully sew it together.
Warm gaiters with your own hands
Many needlewomen have successfully developed universal instructions, thanks to which you can knit high-quality gaiters for yourself and your loved ones. The main role in this case is played by the yarn, which must be soft, warm and pleasant to the body. The technique of making such a thing is kept to a minimum. The main thing is to prepare all the necessary equipment:
- Knitting needles of the right size.
- High quality yarn.
- A regular elastic band.
- A needle with a wide eye.
- Sharp scissors.
Openwork
Dimensions: length 40cm, width 27cm, elastic band diameter at the bottom 13cm.
We will need:
- acrylic yarn - about 200g;
- circular sp. No. 6;
- marker.
Knitting density: 24p. for 16r. correspond to a square 10 cm by 10 cm
Description
We start knitting leg warmers with knitting needles from the 48p cast-on. We switch to circular knitting. Place a marker at the connection point. We knit 5cm 2L x 2P.
We switch to openwork and perform 10cm according to the scheme:
1r.: *2l, 1l. for the bottom slice, 1i.* - repeat from * to * until the end of the row;
2p.:*2p.in 1p., 1n.,1l., 1p.* – repeat from * to* until the end of the row;
3R: *3L, 1P* – repeat from * to* until the end of the row;
4r.:*1l., 1n., 2l. for the bottom slice, purl 1* – repeat from * to* until the end of the row.
After this, we begin to add loops: in every 4th r. Add 1 stitch symmetrically from the marker. We do this 8 times. We end up with 64p.
We continue to perform the openwork for another 30 cm in height. Then we move on to decreases. Symmetrically from the marker in every 2nd r. decrease by 1 p. twice. 60p left. We knit a 10cm elastic band.
Making patterns
Seamless leg warmers do not require patterns. Therefore, this item is only for those who decide to make leg warmers on two knitting needles.
- A rectangle is drawn on graph paper. Its largest side is the entire length of the leggings.
- The smallest width will indicate calf girth.
- The resulting rectangle is placed lengthwise.
- The small sides are divided in two. The midpoints are connected by a line.
- To set the vertical, you need to set aside the length of the entire leggings from the top line.
- Lines are drawn parallel to the horizontal ones.
- On the top line, the half-circuits of the leg are laid at the top point of the leggings - on both sides.
- On the line at the very bottom is the ankle circumference.
- You need to connect all the ends of the lines with a smooth curved line.
- At the bottom you will need to add another small rectangle - it will play the role of a lapel.
The pattern usually doesn’t work out the first time - that’s not a problem. Over time, it will not take a little time.
With a relief braid
To work you will need:
- mixed yarn -200g;
- set of sp. No. 4.
Patterns used:
- relief: 1r.: 1kr., 3p., *2l., 6i.* – repeat from * and to * twice, braid according to the pattern, * 6i., 2l.* – repeat from * and to * twice, 3i., 1cr; 2 rub. and all even ones - according to the picture.
- elastic band 3l.x3i.
Description
Dial 74p. (72 stitches per pattern and 1 stitch on each side) and tie 8cm elastic bands. Then we move on to relief, first decreasing 1 purl at a time. p. symmetrically along the edges of the pattern. We get only 72 stitches: 34 stitches of which are for the relief pattern in the center and 18 stitches each. for elastic plus 1cr. around the edges. Having knitted 15cm, we begin to make decreases in every 20th row: 4p. - once, 2p. -1 p., 4 p. – 3 rub. The total height of the relief pattern should be 42cm. Then we move on to knitting elastic. Its height is 18cm.
We close the loops. We sew the seam from the wrong side.
Single-color patterns on two knitting needles for beginner needlewomen
A simple pattern for those who don't know how to knit at all. To work, you need to select medium-thick yarn of a suitable color and two knitting needles No. 7. You also need to take a thick needle with a large eye for stitching finished panels.
Then measure your leg and design the pattern as described above in the thematic section.
Here is a simple pattern for knitting leg warmers for girls:
- Cast on 90-100 stitches on two knitting needles, depending on the resulting pattern and measurements taken.
- Knit with an elastic band according to the pattern: 2 purl (i), 2 knit (k) loops.
- Knit 10-12 cm with an elastic band and proceed to the main part, the length of which will be approximately 25-30 cm. Knit the middle part with the addition of loops, focusing on the created pattern. Towards the end, you need to decrease the loops so that the upper elastic band is already in the middle. The model will fit well on the foot and will not slip while moving.
- Finish the work by performing a 2x2 elastic band, as below.
- Sew the halves together, making a thin seam on the wrong side along the vertical edge.
Turn out the finished leggings and try them on your feet.
Preparing for work
For knitting, beginning needlewomen will need:
- a pair of double needles, number 2;
- shimmering black yarn “Pekhorka” - 100 g (430 m);
- size chart according to which you can knit leggings not only for girls, but also for adult women.
When describing the knitting pattern we will use the following abbreviations:
- n. - loops;
- n. – yarnover
