13 models of crocheted capes with diagrams, descriptions and video MK

Knitting clothing items primarily implies insulation, although in the world of all kinds of yarns and newfangled patterns, very stylish solutions continue to appear in the images of modern fashionistas. Shawls, boleros and openwork scarves, ponchos decorate the outfits of many girls both in everyday life and on special occasions. Crocheted capes, with patterns for them can be seen in our material, complement evening and holiday outfits with gentle chic, hide shoulders from the scorching sun and warm you up on summer and winter evenings.

We offer some options for crochet capes with patterns. Some types of capes, like ponchos and shawls, are so simple to knit. You just need to choose the pattern you will knit according to, the shapes are very simple. But for a bolero, you first need to draw a pattern on paper and, starting from it, tie the parts together. Some sewing skills required. Boleros are decorated with functional and decorative materials, such as buttons, brooches, beads, and ribbons in the form of ties.

Crochet openwork cape on shoulders

Size: 52/54.

We will need:

  • yarn, 100% cotton, 50g per 175m, black – 400g;
  • yarn, silver lurex – 25g;
  • hook No. 1.75.

Description

We crochet the cape, following the patterns. We start with scheme No.2. We knit a long, with a reserve, chain of air loops. On it you need to knit 15 or 16 (of your choice) repeat patterns of pattern No. 1. Then we do a fitting, after which we cut off the extra VPs of the original chain.

We tie the bottom edge of the product with silver yarn in a pattern. When tying in the area between the fans, we make two spirals: in each loop there are chains of air. p. knit 3-5 stitches with 1 crochet.

Along the upper edge of the cape we crochet according to cx. No2.

What will you need at work?

The pads on the stool need to be hard and able to hold their shape. Twisted, thick yarn is best suited for knitting them.
True, you can also use many other threads. If the choice is given to thin options, the yarn should simply be folded several times. It will also be possible to create incredibly beautiful openwork covers for a stool. When choosing yarn, keep in mind that it may shrink. As a rule, such changes are observed when choosing materials with a natural composition. For example, cotton or wool threads. Before you start working with them, it is necessary to carry out a number of preparatory manipulations. The yarn is wetted and then dried. True, you can also simply make a small increase during the knitting process, taking into account shrinkage.

Info! When choosing synthetic threads, the product may stretch during use. Naturally, there is no need to make a reserve in such a situation. On the contrary, it is worth considering the possibility of reducing the size of the product.

You can knit furniture covers/capes from knitted threads. Such models look incredibly attractive and do not require additional decor. Just as in the case of synthetic materials, in this case it is additionally recommended to provide a fabric base.

Often, needlewomen prefer polyester round cord. Capes made from it are practical and keep their shape well. In addition, threads made from plastic bags are often used. Such products are capable of providing complete surface protection, but are not very convenient to use.

Products made from merino wool yarn look incredibly impressive, but are considered not entirely practical. Pills often form on such capes.

Experienced needlewomen manage to create similar products even from leftover threads. When combined correctly, you can get incredibly beautiful and bright capes. The main thing is that all materials have the same thickness. Otherwise, the product will not have the proper appearance and will take on an unattractive appearance.

The hook is selected taking into account the diameter of the yarn. As a rule, an instrument of at least number three is used. It is recommended to give preference to steel products. Hooks made of wood and plastic break quickly, and those made of aluminum bend.


Cotton


Polyester cord


Wool


Merino wool


Knitwear


Hooks

Openwork cape made of large motifs

Sizes: 38-42.

We will need:

  • yarn containing 40% wool, 20% mohair, the rest is synthetic, 25g per 137m - 125g;
  • hook No.5.

Pattern:

  • square openwork motif: knit a chain of 8 air. p. and connect it into a ring with one connecting post.

Next, crochet in a circular pattern. Every cr. We start the row with the given number of VPs instead of the first stitch and complete 1 SS or 1 double crochet in the top VP replacement or at the top of the double crochets knitted together. Go to next cr. row we make the connection. column.

First you need to connect it once with 1p. 10 rubles each All traces. we crochet square motifs according to the same pattern, but in the 10th row. we attach it to the already connected squares. To do this, we replace the middle VP of the VP arch with one single crochet around the counter arch of the attached square.

The diagram shows two square motifs with connection points. To connect the corners of the squares, we knit an additional one. connecting loops in the first connection. P.

Density: 1 square motif is 27cm by 27cm.

Description

Knit 12 motifs = 6 pieces for the front + 6 pieces for the back. Connect them together according to the pattern. We leave a 22cm gap along the top edge for the neckline. We tie the entire product along the edges in a crab step, making a single crochet from left to right.

Festive scarves

Dresses with thin straps will be decorated with crocheted boleros. You can create chic beautiful things yourself for any special occasion, proving once again that knitted things are not only things for insulation, but also for an elegant addition to an outfit.

A long-sleeve crocheted bolero in addition to a simple dress or a thin dress for a date to a restaurant or a festive buffet. Take Bright type yarn for the product (80% polyamide, 20% metallic, 340 m/90g) - 400 g, hook No. 2.

The simplest knitting pattern can be complemented with knitted flowers or leaves, adding romance and splendor to the image. Tie the rectangle with a thick fabric and secure the side corners a few centimeters apart, as shown in the photo below.

If you are a skilled craftswoman, we suggest knitting an openwork designer bolero from various knitted elements, with additional bead decorations. Such openwork will look stylish if made with cotton threads. For this example, size 48 required 230 g. White cotton yarn 360 m/50 g, 0.75 mm hook for the mesh, 0.9 mm for the elements. Beads 8,6,4 mm, seed beads, 4 viscose decorative tassels, brooch pin.

Knit a bolero with white threads onto your off-the-shoulder wedding dress. Accessorize with pearl beads or a dainty floral brooch.

Article on the topic: Lurex fabric, what is it. Application and care

Elegant openwork cape

Dimensions: 35.5cm by 105cm.

We will need:

  • yarn containing 96% acrylic, 4% polyester, 50g per 185m - 150g;
  • hook No.4;
  • beads with rhinestones Ø13mm – 6 pieces;
  • beads with rhinestones Ø19mm – 17 pieces.

Pattern:

  • the motive is carried out according to the scheme. A total of 12 whole fragments are needed.

We collect 8 VPs and close them in a ring. Then we work according to the description and diagram:

1r. (front side): 12 air. n., 1 column. b/n in the 2nd st from the hook, 2 sc in the next one. 9p., 1 RLS in last row. p., SS in the next. ring column, turn;

2p.: 1 VP, 1 RLS behind the back wall in each post, turn;

3p.: 1 VP, 1 stlb without n. behind the rear wall in the first 4 stitches, * 3 VP, 1 sc for the back. wall in the next 4 dc* – from * to * four times, SS next. ring column.

Second curl

1r. (front stitch): 11 VP, SS in the 2nd arch from the ring before. turn, 1 column. without a crochet in the 1st stitch, 2 single crochets. next 9p., 1 sc in next. p., 1 sc in next. ring column, turn;

2p.: 1 VP, 1 RLS for the back. wall in each column, turn;

3rd: 1 air. p., 1 column. without n. behind the rear wall in the first 4 stitches, * 3 VP, 1 sc for the back. wall in the next 4 dc* – from * to * four times, SS next. ring column.

Crochet the third, fourth and fifth curl according to the algorithm of the second curl.

Sixth curl

1r. (front stitch): 11 VP, SS in the 2nd arch from the ring before. turn, 1 column. without a crochet in the 1st stitch, 2 single crochets. next 9p., 1 sc in next. p., 1 column b/n in the next. p., 1 sc in next. ring column, turn;

2p.: 1 VP, 1 RLS for the back. wall in each column, turn;

3rd: 1 air. p., 1 column. without n. behind the rear wall in the first 4 stitches, * 3 VP, 1 sc for the back. wall in the next 4 trebles* – from * to * twice, 1 VP, SS in the outermost point of the 1st curl, 1 VP, 1 RLS behind the back. wall in the next 4 stitches, 3 ch, 1 sc behind the back wall in the last four stitches, sl st in the first stitch of the ring.

Finish knitting.

Half motive

You need to knit 5 of these.

Knit 4 curls, after the fourth we knit a SS in each loop along to the first curl.

Assembly

We lay out all the elements (12 full and 5 half) on a horizontal surface according to the pattern and connect them together with a needle or hook.

Harness

Knitting is done in circular rows.

1cr. R. (front stitch): connect the yarn conn. Stlb to any curl. We knit: [*1 sc in each stitch and 2 sc in each arch from VP* – from * to * repeat until the beginning of the next one. curl, 4 VP, 1 stb without n. to the beginning of the next curl] - between the brackets we repeat for the entire row, we connect the row SS at the end;

2p.: 1 VP, 1 RLS in each post, 5 RLS in each arch, SS; from 3 rub. 5 p.: 1 VP, 1 RLS in each stlb;

6p.: 1 VP, tying with crayfish step, SS.

We finish knitting and carefully thread the tails of the threads.

We sew one large bead into the middle of the motifs, and six small ones onto the edge of the right shelf, instead of buttons - see the pattern. The holes between the loops will be used as buttonholes.

Beautiful ponchos

The poncho sounds like Mexican clothing and does not conjure up a sophisticated image. But the simplicity of knitting a poncho, combined with certain patterns and colors, creates a truly wide selection of capes in a variety of styles, from sophisticated and feminine to cozy, warm.

For a poncho, like a shawl, you need more yarn than for a bolero, about 500-600 g. When knitting a poncho, you can also use motifs or a combination of several patterns, depending on the style.


Openwork cape on shoulders for the beach

The openwork cape is made in one size.

We will need:

  • sectional colored yarn, 100% cotton, 50g per 180m – 350g;
  • hook No. 2.5 and No. 3.

Patterns:

  • main pattern: the initial number of sts should be a multiple of 16 plus 3 sts. We knit according to the images of the pattern.

We knit the beginning of each row according to the pattern, with 3 VP lifts instead of 1 DC and from a loop before rapport, which we repeat for the entire row. We finish with loops after rapport. From 1 rub. 9 rubles each We perform it once, then repeat from 2 p. 9 rubles each

Density: 20.5p. 8.5 rows equal 10cm by 10cm.

Description

The openwork cape on the shoulders is knitted in one piece. The knitting directions are indicated by an arrow on the pattern. Let's start with crochet number 3. We make the initial chain of 115 VP plus 3 VP lifting. Next we knit the main pattern. After 77r (this is about 90cm) from the initial row we will get 1⁄2 of the product, i.e. we have knitted to the imaginary shoulder seam.

We knit the first 30 stitches. for one shoulder, we leave the central 55 loops unknitted, to connect the two sides we make a chain of 55 VPs, and finally we knit 30 stitches. for the second shoulder.

Having knitted a total of 153 rubles. (this is about 180cm), we complete the work.

Harness

We tie the product along the contour with a No. 2.5 crochet hook, performing 1 cr. R. columns b/n. We do the neck tying in the same way.

Unusual two-layer cape

The highlight of the model is a delicate powdery color in a non-standard cut. Here, the more flounces, frills and lace, the more intricate and attractive the picture.

First, the central part is made in the form of an irregular oval. To help the needlewoman, there are fragments of patterns that can be used when knitting fabric. The edges of the oval are decorated with semicircular motifs and a thin trim of white and pink lace. The finished cape is folded in two layers, as in the photo, and fastened in front with one large button.

In conclusion, to the delight of the needlewomen, there is a video tutorial with step-by-step training. The craftswoman will show you the entire knitting process of a coffee holiday cape. Beginners will discover the secrets of Tunisian knitting and the transition from plank to openwork fabric. Choose a model you like and knit to your health!

Delicate shoulder cape

We will need:

  • yarn containing 60% cotton, 40% acrylic – 200g;
  • hook No.3;
  • beads for brooches;
  • brooch clasp.

Description

We start knitting by setting up a VP chain. Next, we knit seven fantasy rapports on it along cx. No1.

Next we start knitting the brooches. We carry out the work according to cx. No2

We embroider the center of the decoration with beads. Sew a fastener on the wrong side.

Performing a lock

Lightly moisten the finished product and fix it with needles on a flat horizontal surface at the required dimensions. Let it dry.

Legend

A whole system of symbols and abbreviations has been developed over the many years of knitting. However, it is not possible even for experienced needlewomen to remember all the signs, images and abbreviations. Moreover, individual symbols are created for many diagrams and descriptions. However, a beginning needlewoman should learn basic system concepts even before starting independent work:

Decor options

After the capes are knitted, they can be decorated and thus give the products an even more attractive look. There are a huge number of decorating methods. Among the most successful options are the following:

  • sew fringe or lace around the perimeter;
  • fix lush tassels in the corners;
  • tie around the edge using fancy yarn. For example, grass and pompom thread will look impressive;
  • apply the application method;
  • sew flat, fairly large buttons to the fabric;
  • give things intended for children the appearance of the faces of various animals;
  • complement the composition with the help of peculiar leg warmers or socks that are put on the legs of the stool.

Of course, you should not use all of the above options at once when creating decor. It is extremely important that the decorative elements match the color of the case and match its texture. It is clearly not worth using decor in the form of pompoms on openwork items. It is also inappropriate to use appliques on multi-colored pillows.

To make the decor attractive, you should adhere to the following recommendations:

  • Bright elements look great on a plain background;
  • when using thick threads in the knitting process, decor in the form of pompoms and fringes is quite appropriate;
  • miniature covers that fit on the legs are best knitted from the same material as the cape;
  • if several different materials were used in the work, the finish should correspond to one of them.

Every needlewoman can create stylish things that can become a real decoration of a room. The main thing is to approach this process responsibly and take into account all the important nuances. The first step is to decide on the model, select the appropriate tools and materials. When they are at hand, you can begin to study the diagram and perform basic manipulations. As a result, you will receive a unique product that will certainly transform the interior and make it brighter and more comfortable.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]