In the course of everyday work and educational activities, there are often times when white corrector gets on a dress or trousers, or other item. Let's figure out how to remove putty from clothes so that not a trace remains of it, without damaging the fabric, what detergents and laundry powders can be used.
To understand how to wash concealer from clothes, namely how to deal with the problem in each specific case, you need to read the composition on the tube of correction fluid. Different components included in the putty require different approaches to cleaning things.
Water-based correction fluid
Stains from a water-based corrector are the easiest to remove. Soiled clothes just need to be soaked for 30 minutes in soapy cold water and then washed in the washing machine on a cycle appropriate for the type of fabric. After this procedure, there will be no trace of putty stains left, and the clothes will be clean.
If the stain is fresh, then you don’t have to soak the item, but immediately wash it by hand in running water using laundry soap and then wash it in the machine.
Important nuances
There are several tips and recommendations on how to wash concealer. But first you need to familiarize yourself with the composition of the stationery tool. The emulsion touch is a composition of water and alcohol. That is why solvents must be used to remove typical contaminants. The list of these products includes kerosene. It is not recommended to process products made of velvet, silk and wool at home. They need to be dry cleaned. When preparing a combined mixture, the ingredients are taken in equal proportions.
Particularly difficult stains are covered with applications. It is strictly forbidden to use aggressive agents to clean delicate items. Ammonia should be diluted with water. This mixture will help get rid of stubborn stains from emulsion corrector. Before using aggressive compounds, you must wear gloves and a mask. If an allergic reaction occurs, you should immediately stop cleaning and consult your doctor.
Alcohol based corrector
It is a little more difficult to deal with putty, the main component of which is alcohol. In this case, you need to wait until the corrector stain dries and hardens. Then carefully clean it off with a knife or nail file and wipe the stained area with alcohol using a cotton pad. After this, you will need to put the clothes in the washing machine tank and wash them on the required setting.
Ammonia is another effective substance for destroying alcohol-based putty. Alcohol is diluted in equal quantities with water and then applied to the putty stain. The product is left for a long time (45 minutes), otherwise the contamination will not be able to be removed. When the time is up, the item is placed in the washing machine and washed on the quick wash cycle.
Alcohol (emulsion)
It is more difficult to remove alcohol-based concealer from hands and clothes. It is useless to use dishwashing gel or laundry soap here. More effective substances are needed.
How to remove concealer from clothes?
Ammonia or methylated alcohol, kerosene or gasoline, and paint solvents will help remove putty stains.
Ammonia
This tool is truly universal. It can remove stains of grease and paint, remove yellow stains from sweat and clean blood from fabric.
In addition, it is effective in removing concealer stains from plastic, clothes and hands.
How to remove grout that covers blemishes:
- For hands: dilute ammonia with water in a ratio of 1:4. Take a cotton swab, soak it in the solution and wipe off the dirt.
- For things: dilute an aqueous solution of ammonium hydroxide in a 1:2 ratio with distilled water. Dip a cotton swab into the solution and carefully treat the stain. Distribute the composition over the entire surface, note the time - 15 minutes. During this time, the ammonia will dissolve the putty. Then remove the residue using gentle movements, from the edges of the stain to the center.
- For plastic: to remove the corrector, use an undiluted aqueous solution of ammonium hydroxide or mix it with acetone. Be careful if the surface is painted. In this case, use only ammonia.
An aqueous solution of ammonium hydroxide perfectly wipes paint off the table. But in this case, even a soap solution will do; you just have to put in a little effort and rub the contaminated area more actively.
Kerosene
Before you wash the concealer off your clothes with kerosene, test it on the inside seam of your blouse.
Gasoline and kerosene are really good cleaning compounds. They will rid the clothes of corrective agents, but will leave a very unpleasant odor, which can only be removed after the fifth wash.
How to remove a stain?
When cleaning up dirt, wear gloves to prevent your hands from stinking later. Remove any remaining dried putty with a blunt object. Then treat the area with kerosene. Refined gasoline will also work.
Apply a few drops from the dropper. Note the time. It takes 10 minutes for the product to take effect.
When washing off kerosene or gasoline, do not remove your gloves. Then wash the item in an automatic washing machine.
Solvent based correction fluid
The most durable and difficult to clean is putty, which is based on a solvent. However, it is quite possible to remove it if you know what to use and how to do it correctly. To do this, you will need a piece of clean cloth, a solvent (nail polish remover, white spirit) and cotton pads.
The item is turned inside out, the wrong side is placed on a clean material. Moisten a cotton pad or ball with solvent and wipe the stained part from the edge to the middle of the stain. Then we wash the item.
If the procedure is unsuccessful and the stain from the corrector remains, then only professional dry cleaning will help in this case. Do not wash when the contamination is very strong.
To remove corrector putty from clothes, it is important to remember the main rule - you cannot wash clothes in hot water, otherwise they will be damaged. When a fresh mark of putty appears on your clothes, you need to put a napkin or soft sponge on it, which will make it easier to clean the stain later. If the putty remains, it is best to use a special solution - “Antishtrich” and wash it.
How to remove putty from clothes in different ways
There are two ways:
- dry;
- wet.
Each of them is used in certain cases.
The dry method removes only old, already dried spots that have a small area. In addition, this method can only be used for cleaning dense fabrics, such as jeans.
The following tools are suitable for cleaning correction putty:
- stationery knife;
- thick needle;
- nail file;
- sharp knife;
- Toothbrush;
- clip.
Before removing the stain from the stroke, you should make sure that it is completely dry, and then remove the corrector with small movements, prying the edge of the putty with a handy tool. At the same time, it is necessary to regularly blow off small particles so that they do not eat into the fabric upon further removal. Remaining stains or white dust are removed using a damp cloth or handkerchief soaked in water.
The second method is wet cleaning. It involves removing stains with various detergents. It is more suitable for thin fabrics such as cotton. The method is used for both fresh and dried stains. Only in the first case is it also necessary to carry out manipulations to remove them with a napkin.
Loyal cleaning of putty stains
This type of strip removal from clothing is the most attractive, since in this case the risk of new problems, such as damage to the fabric by chemicals, is virtually eliminated. But, in turn, this method does not always guarantee a positive result.
Proper removal of stains from correction fluid includes washing the fabric by hand using various detergents and cleaners.
The safest to use are:
- washing powder;
- toilet soap;
- laundry soap.
Chemical cleaning
This type includes removing stains using various chemical means, for example:
- special solution “Antishtrich”;
- ammonia;
- ammonia;
- cologne;
- tonic;
- vodka;
- shaving lotion;
- acetone;
- White Spirit;
- petrol;
- kerosene.
Important: when using chemicals, you must take into account the type of fabric, since not every product may be applicable in a particular case. You need to do a test on an inconspicuous area of the item.
Roller stroke corrector
To remove stains from the roller stroke, wash the stains in a warm aqueous solution with the addition of liquid soap for 3 minutes. If the putty is not washed off, the item must be left in this soap solution for another 45 minutes. After the procedure, clothes are washed in the machine.
A special product that you can buy at an office supply store will also help you remove the corrector from your clothes. A “thinner” is applied to the corrector putty and after a few minutes the stain disappears. However, the product cannot be used on colored or thin material, since not only the dirt will be erased, but also the fabric itself.
What not to do
Improper use of cleaning products can result in damage to clothing. To avoid this, you should know what not to do:
- Do not use chlorine bleach on colored fabrics, otherwise they will fade and lose their original appearance. It will be very difficult to get him back;
- check the effect of the selected substance in an area that is not visible to the naked eye;
- For delicate fabrics and silk, removing stains with alcohol-containing substances is not permissible.
It is almost impossible to remove ingrained correction fluid from a velvet jacket on your own. It’s better not to experiment if the item is expensive for you. It’s better to give it to specialist dry cleaners who know how to deal with this and how to remove putty or concealer from clothes. Read on to learn how to remove blood stains from a mattress.
How to avoid damaging fabric when removing concealer stains
In order not to damage the fabric when cleaning stains, you need to follow certain rules:
- Do not vigorously rub the contaminated area of clothing with a chemical agent: acetone, solvent or gasoline, as this may spoil or damage the surface of the material.
- Be sure to place a piece of clean cloth under your clothes to avoid the chemical spreading over the material. The solvent will not spread beyond the stain if its edges are moistened with water.
- When it was not possible to wet the putty immediately and it has dried, you should try to remove the stain, literally clean it off with a nail file before treating the fabric with the product.
- Items made from delicate fabrics are cleaned from the inside out; be especially careful when using acetone or white spirit for cleaning.
- Once the barcode stain is removed, you should immediately wash the solvent off the fabric so that the chemical does not remain on the clothing.
- When time is short or an important event is expected, and solvent and alcohol are not available, you can remove putty from trousers or other clothing with the help of alcoholic products. The only thing is that you cannot use cognac or other dark tincture for these purposes, as stains may remain. What is needed is an alcoholic drink without color, such as vodka.
- To wash concealer from black clothes, do not use very hot water when washing after removing stains. The speed of the washing machine needs to be set higher.
- Freshly soiled trousers should not be rubbed dry, that is, without using water, otherwise the corrector will penetrate deep into the fibers of the material, which will subsequently complicate the cleaning task. You need to remove fresh putty by brushing it off with a napkin or cotton swab. If possible, it is better to change clothes and put the soiled clothes in a bowl of warm water.
Scrubbing away fresh dirt
If you find a white stain on your clothing, it is advisable to put everything aside and start eliminating it before the composition has time to be absorbed into the fabric. For such situations, there are the most gentle methods that will help remove the putty in just a minute.
How to Clean Caulk with a Wet Cloth
- Use a dry cloth to remove any remaining liquid.
- Blot a rag or paper towel with warm water and remove any excess caulk. If there is nothing nearby, you can use any piece of cotton fabric. Do not rub the mark, try to move from the edges to the middle so as not to spread the stroke even more.
- If that doesn't help, use a brush or nail file.
- Wash the item of clothing in washing powder by hand or in a machine.
How to clean putty with soap
- Remove any remaining unabsorbed concealer from the fabric.
- Take laundry soap and rub it into the stained fabric, set aside for 15 minutes.
- Rinse the item to remove any remaining detergent and putty.
- If this type of soap is not on hand, take toilet soap, mix it with an aqueous solution and soak the item of clothing for a couple of hours.
- Wash your clothes in a washing machine on a suitable cycle.
Before adding the item to the rinse water, you can pour stain remover into it.
Clothing in black colors
White concealer on black trousers is most noticeable, attracting attention and creating inconvenience to their owner. Since trousers are generally made of durable and dense material, serious chemicals are required to remove dirt from them. You can try to remove putty from trousers by following these rules:
- Ammonia helps to easily remove alcohol putty. A piece of material is placed under the stain, and a cosmetic disc soaked in ammonia is applied to the stain itself for 15-20 minutes. If it was not possible to remove the contamination the first time, you need to repeat the action. Then wash the trousers as usual.
- Mix ammonia with water in equal volumes. Then moisten a small cloth with this solution and place it on the stained area for about 15 minutes. Then the cloth is removed and the dirty area is lightly wiped with a brush. If the putty is not completely erased, you can repeat it again. After all the manipulations to remove the concealer stain, the trousers are sent to the wash.
- An effective way to remove putty is to use purified gasoline. It is important to remember that it cannot be used on trousers if they are made of synthetics, as this may damage the product. Cleaning is carried out as follows: a sponge or cotton ball is moistened with gasoline and applied to the contaminated area of the trousers for 2-4 minutes. Then you need to rub the stain a little. It is necessary to rub from the edge of the corrector stain to its center so that the mark does not increase. Upon completion, the item is machine washed.
- You can also use alcohol to get rid of correction fluid stains on clothes. A fabric folded several times is placed under the material on which the contamination is being removed to prevent printing. A cosmetic stick for cleaning ears is moistened with alcohol and the dirt is treated. When the stick becomes dirty, it must be replaced with a new one.
- A very good way to combat emulsion-based putty is acetone or solvent. The sponge is moistened with the product and gently rubbed over the corrector stain. When the sponge becomes dirty, it needs to be changed. After the procedure, the trousers need to be soaked in warm water, adding powder, which has properties to remove stains, since the solvent may leave a mark.
Did the article help? Rate it
How to remove a stroke stain: first aid
If you find a fresh stain from the correction fluid, you should clean it with a regular paper napkin. But there is no need to rub the stain in different directions - this can lead to the stain spreading, and it will become even wider than it was.
To prevent this from happening, you need to pinch the corner of the napkin with your index finger and thumb, and then slowly move from the edges to the center, thus minimizing the size of the contamination.
If a dry paper napkin does not help, you can take a damp one or a piece of cloth soaked in warm water.
Special means
In order to remove concealer stains on clothes, you can use improvised means that almost everyone has in the house, or use a special product to dissolve the components of this putty.
For example, an alcohol stain will easily come off if you use ammonia when soaking, as well as the solvent that comes with the putty. It is designed to liquefy dried putty, therefore, applying this product or liquid to the cleaned area can get rid of the stain.
Features of drawing strokes from different surfaces
A situation may arise that the corrector not only gets on clothes, but also other surfaces, furniture upholstery, or even human skin are damaged by its coloring composition. In each of these cases, it is necessary to act individually, and then not a trace will remain of the former pollution.
Important! You can wipe off a putty stain from any surface without fear of damaging the product if, before using any of the selected cleaning agents, you check the mechanism of its action on an inconspicuous area of the product: this way you can avoid damaging the color scheme or appearance of the surface being treated.
In order to wipe off corrector from a table, a touch from plastic or another surface (for example, tiles), you can resort to one of the following simple methods:
- using a soft spatula, you need to carefully scrape the putty from the damaged area;
- Using a cotton pad soaked in an alcohol solution, clean the putty using a blotting motion.
The listed methods will help you easily and quickly wipe the putty off the table.
If putty gets on furniture upholstery, then the sequence of actions should be similar to the methods for clothing. Initially, it is necessary to find out what composition the corrective substance has and, based on this, select a suitable means to combat pollution.
If a person’s skin has been damaged by the coloring composition, then you can wipe off the corrector from the skin with simple steps:
- if the putty was water-based, then it will be enough to simply wash your hands thoroughly with soap;
- if the putty had a different composition, then you can resort to additional means of control, which are suitable: alcohol, nail polish remover, makeup remover tonic.
