How to stretch the cuffs on your pants -

Home / Eco-friendly house

Back

Published: 07/12/2020

Reading time: 8 min

1 Water and ice
2 The elastic band of my panties is pressing, how can I stretch it?
3 Adding fabric to the cuffs
4 If the situation is hopeless
5 How to quickly stretch the elastic on panties - an express method
6 How to sew elastic into pants
7 How to stretch the elastic on shorts?
8 How to stretch panties that have shrunk after washing?
9 How to lengthen children's jeans
10 Which sneakers can stretch
11 When the butt presses
12 Pairs and paper
13 Stretching an elastic band
14 The smartest decision
15 Alcohol and laundry soap
16 Window cleaner
17 Lengthening sweatpants

Water and ice

There are several ways to stretch sneakers or sneakers using water and cold. You can put wet sneakers over your socks and then lace them up tightly. Until the shoes dry, you need to move actively: run, jump, walk. If at any point your feet feel hot, simply pour cold water on the soles.

You can expand fabric sneakers with ice. To do this, use a physics course familiar from school:

Take two thick plastic bags, place them inside each sneaker and carefully straighten them out.
Pour water into the bags and tie them tightly.
Place the sneakers in the freezer for 24 hours.
If the pair presses in the sock, place something under the heels so that the bulk of the water “flows” down.
After a day, remove the sneakers from the freezer.
Let the ice melt a little.
Remove the cellophane.
Remove excess moisture with a napkin and dry the sneakers.

The method has one caveat: if the fabric is too thin, it may tear under the influence of ice.

How to stretch jeans in the waist and hips. How to stretch jeans at home using water

As you know, wet fabric is more stretchable and, of course, denim is no exception in this case. Select areas on your jeans that feel uncomfortable. Usually this is the area of the hips and buttocks or the waistband of the pants. Spray these areas with water using a spray bottle. If you don’t have one, you can take a spray bottle from one of the cleaning products that have run out, and fill it with water and wet the desired areas.

After making sure that the fabric is wet inside and out, try to gently pull it to the sides with your hands. Also, if you are stretching the hips and waist area, you can stand with your foot on a wet spot in the pocket area and gently pull the opposite part of the pants in the desired direction with your hands. The procedure can be repeated ten times. At the same time, remember that the button at the waist must be undone, because the item of clothing may tear. Also, do not pull on the pockets themselves or the fasteners on the jeans. It is important to remember that you should not try to stretch the fabric in areas where it is thin or where there are holes.

You can also put the jeans on yourself as much as possible and sprinkle them with water already on your figure. A damp cloth will retain the same shape as when it dries. While your pants are wet, it’s good to do simple physical exercises: squat, bend over, raise your legs in all directions. Jeans soaked in water should stretch well.

If you wish, you can put on your pants and sit in the bathtub with water. As an option, add bath foam there, because detergents soften the fabric quite well. You need to spend about fifteen minutes in this water so that the fabric is thoroughly wet and saturated with the product. When you feel that your pants have become a little looser, you can stretch them in the right places. You can spend another ten minutes in the water. After leaving the bath, also do physical exercises and let the fabric dry on your figure. Jeans stretched in this way will remain the right size until the next wash.

Please note that wet jeans may begin to fade and you will need to try to protect your interior items from the blue dye. In the case of stretching jeans, you will have to avoid using dryers, because there they can shrink in size again. It is better to take them out or go out into the fresh air in them and wait until they dry completely. It should be noted that such procedures are most likely suitable only for the warm season, because in winter it won’t take long to catch a cold.

If you have no desire to walk in wet clothes and only need to stretch your belt, you can use the following stretching method. Fill a plastic bottle with water and place it in the waistband of your jeans so that it stretches along the bottle. If the bottle is too small, try a glass analogue from champagne. The height of this bottle is suitable even for very large jeans sizes. Let the pants dry directly on the bottle. After taking off your jeans, you will notice how they have changed in size. Of course, this is also only before the first wash, and then you will have to repeat the procedure again or lose a few extra pounds.

The elastic band of my panties is pressing, how can I stretch it?

Before stretching, you should make sure that only the elastic band is small. Some men or women often flatter themselves and deliberately buy underwear 1-2 sizes smaller. Even if in this case the elastic stretches, the underwear itself will remain small and may cause discomfort.

The first way to stretch an elastic band is thermal. To do this, you will need an ironing board, an iron and a piece of fabric.

The fabric is moistened and the iron is heated to maximum temperature.
The panties are stretched to the required girth. Now is the moment when it is better to “measure 7 times” before stretching. It will be impossible to return the girth back.
The stretched elastic band is covered with a damp cloth and heated with an iron.
First, move the iron lengthwise along the fabric for 10–15 seconds, and then leave the iron in one place for another 10 seconds.
This procedure is carried out along the entire length of the panties for 5–10 minutes.
Then check whether the desired girth has been achieved. If not, repeat the procedure.

The second option is longer, but will require almost no participation from you. To do this, the panties are stretched to the desired girth and secured to a chair, drawer, chest of drawers or other object. The laundry remains in this position for a day. Often this time is enough to stretch the elastic by 1-2 sizes.

Sometimes the elastic is not sewn into the drawstring of the linen, but is sewn on top. Even if you stretch it thermally, it may lose its appearance or continue to stretch further. In this case, there are two other ways.

The first option is to make a tuck.

An incision must be made in the elastic along the side or back seam. The depth of the incision is determined experimentally during fittings. The main thing when cutting is not to reach the tissue.

The resulting cut must be processed. Sometimes it is enough to cover it with matching threads or braid. And so that the neckline does not catch the eye, you can sew a piece of elastic fabric or other elastic to it. It can be sewn either in tone or as a bright accent. For symmetry, you can make small darts from the two side seams of the linen. This method is suitable not only for underwear. This way you can increase the elastic on pants or skirts.

Another method will require a complete replacement of the rubber band.

A small incision of 1-1.5 cm is made on the underwear drawstring on the wrong side and the elastic is pulled out.
Sometimes it is stitched with 2-3 or more horizontal seams. In this case, you will have to rip out all the seams.
The old one is pulled out and put aside.
Instead, a new elastic band of the required girth is inserted into the drawstring.
It is sewn with horizontal seams if necessary, and the incision site is stitched or its edges are processed.

Remove and change the rubber band

This is a troublesome, but at the same time effective method. In addition, there is no need to expose the fabric of clothing to iron or water. In this case, we use the following sequence of actions:

Turn the garment inside out and make a small cut on one side in the hem of the garment where the ribbon is located. It is enough to make a hole of one and a half centimeters. If the tape is sewn into a seam, the latter will have to be ripped out. This is easy to do with scissors;
Carefully cut the elastic in one place and carefully remove it from the hole. Pull it out slowly and do not lose the tape in the folds of the fabric. If the item fits the figure normally and without elastic, you can sew up the hole or hem it and leave it like that;
If without an elastic band the clothes look unsightly or do not hold, we can lengthen the ribbon by sewing a piece of the required length, or insert another elastic thread that is more comfortable and suitable in size;
We carefully insert the tape back into the hem and distribute it evenly using a safety pin. Before sewing the seam, try on the product to see if it is too tight for you.

Please note that it may not be just the tight tape. Clothes in general may be too small. In this case, you need to stretch the fabric completely. Stretching methods depend on the type of material. For some, boiling water and an iron are suitable, for others - steaming. In some cases, it is enough to pull the item onto a chair or ironing board. For example, wool stretches well. How to stretch a cotton item, read the link

Adding fabric to the cuffs

Fabrics of similar color and texture or, conversely, contrasting inserts are used to increase the length in the lower part of the trousers, creating cuffs or lapels:

Measure the width of the cuff along the bottom edge of the trouser leg, place it on the selected fabric, and add 2.5 cm for stitching.
Measure the desired cuff height with seam allowance and cut out two rectangles.
The side seam of the cuff is sewn and processed.
Rip out the bottom seam of the trouser leg and carefully smooth out the fold lines.
The top of the cuff and the bottom of the product are connected with pins or a basting seam, after fitting they are sewn on, reinforcing the cuffs with non-woven fabric.
The details are ironed and a lapel is made.

If the situation is hopeless

When none of the above methods help, and the purchase still feels too tight, try simply removing the insoles. If this approach seems unhygienic to you, replace the thick sports insole with a regular thin one. As a last resort, you can sell or give a pair to friends.

We suggest you find out which iron sole is better: ceramic or non-stick

And remember that you can’t buy sneakers without trying them on. The best time to buy sports shoes is in the evening. After all, at this time our feet are a little larger.

If the elastic is inserted into the tights themselves, then you can make a slight cut on the inside, where the elastic is located, and pull out a small piece of elastic. And either change the elastic band altogether for a longer one, or sew a small piece to the elastic band. In this way you can lengthen the elastic on tights. If the elastic band does not have a belt, then you can loosen it using the cutting method, cutting the threads across three to four threads.

You can also wet the waistband of your tights and steam them well with an iron. You need to tighten the elastic band, but not too much, and move the iron. You can also pull a wet elastic band onto a mold that fits the desired size, with the help of which the elastic will stretch.

On socks, you can loosen the elastic by cutting the elastic threads. You need to take the sock and the place where the elastic is located, stretching it, trim the elastic threads, but you need to trim after two or three threads.

Replacing the gum

To work you need:

The elastic is the same width as the old one.
Large size pin.
Thread and needle.
Scissors.

Work process:

Bend the belt and make a small cut in the middle. The hole size is 1.5 cm. If the elastic is sewn into the seam, it must be ripped open with scissors.
Cut the elastic and take it out.
Attach a pin to the new elastic band.
Start inserting the elastic into the slit on the waistband.
Move the pin and rubber band with your fingers to the end.
Secure the elastic band into a double knot.
Sew up the cut with a needle and thread.

Video of replacing elastic in trousers

How to quickly stretch the elastic on panties - an express method

Elastic consists of thin threads called spandex. Some manufacturers use several strands of spandex directly onto the underwear.

To increase the girth of the underwear, the spandex threads are cut. This must be done with sharp thin scissors or tweezers.

If the underwear is covered with spandex threads, the cut points must be secured with threads. In such products, the rubber thread will stretch in different directions after the cut. In a couple of wears, the product may become larger than required.

This method is considered fast, because the result will be noticeable within a few minutes. But it has a significant drawback - the thing stretched in this way will not last long. After some time, the rubber band will have to be replaced.

How to sew elastic into pants

To work you will need:

Pants that require elastic to be sewn into them.
Rubber. Its thickness depends on personal preference (1.5-3 cm).
Pins.
Sewing machine.

Install a knit stitch on the machine. It will not stretch or deform the fabric. Set the interval to 3, put the foot in zigzag mode.
Fold the elastic in half and stitch the ends of the elastic with the established seam to align it into a circle.
The elastic is attached to the inside of the top of the pants. To do this, the elastic seam is located on the front seam of the trousers and is attached with a pin. The other part of the elastic is attached to the opposite seam of the pants. Next, the elastic is evenly distributed and attached with pins.
The elastic is sewn to the trousers using a knitted seam. The seam should be 2-3 mm from the edge.
Place the machine foot on the overcasting foot. Set the type of seam to overlock with small intervals. Sew the edge of the product. This seam will make it more neat.
Fold the elastic inward along with the top of the trousers. Secure the fold with a pin. Go over the entire top of the pants and secure the folded elastic band with pins.
Set the presser foot to normal mode, set the knit stitch at intervals of 3. Sew the elastic around the entire circumference. The seam should be 1.5-3 cm from the edge.

Video on how to sew elastic into trousers:

Models of trousers with elastic for women

Women's trousers with elastic can be of different models and styles:

Bloomers are wide trousers in oriental style. They often have a low waistline. Elastic is sewn into the waistband and the bottom of the legs. Sewn from light types of fabrics.
Pants - flared from the knee or hip. The elastic is sewn into the belt.
Breeches are wide at the top and very narrowed at the bottom. Their length is slightly above the ankles. A popular model with a high waist and a wrap. The elastic is sewn into the top and bottom of the pants.
Wide-leg palazzo pants. They are intended for a festive event. The flare starts from the waist or hip. This model visually resembles a skirt. They are able to correct the figure and distract from its shortcomings.
Models that are very tight-fitting (skinny).
Sports models are designed for training. The elastic waistband provides a comfortable fit that will not interfere with your workouts. Elastic bands on the legs provide additional wearing comfort.
Bananas are trousers that have oval-shaped legs. They look impressive due to the folds at the hips and narrowing towards the ankles.
Capris are a cropped trouser model that reaches mid-calf length. The elastic is sewn into the waistband and the bottom of the trousers.
Cargo is a loose-fitting model with wide legs that reach mid-calf. Sewn with a low rise, large patch pockets and flaps. The elastic is sewn into the top and bottom of the trousers. These pants are often sewn in military style.
Pumps - have wide legs and length to the middle of the shin. Gathered at the bottom with elastic.
Classic pants. Sewn with a wide elastic waistband. The office version is characterized by a straight cut, without decoration.

Today, the trend is high-waisted trousers that are gathered with an elastic waistband.

The elastic band for pants can be:

open or hidden under fabric;
narrow or wide;
different densities;
with rope, braid or tape;
with a wide tie belt.

Important rules when choosing trousers with elastic:

you cannot choose trouser models whose elastic bands dig into the sides;
the model should fit well: the pockets do not bulge, creases do not form at the seams;
The trousers are made of high quality fabric.

Video on how to sew trousers with elastic

How to stretch the elastic on shorts?

It may be better to sell or give away such sneakers. But if this option is not suitable, you can try stretching using products containing alcohol.

Remember that:

Sports shoes are easier to stretch in width.
You can lengthen a fabric product by a maximum of half a size. You can stretch sneakers to size if they are made of leather, suede or nubuck.
The skin becomes fragile after the procedure. Before stretching, especially using heat, it is better to treat the product with shoe polish.
Sneakers made from artificial materials are easy to deform if not handled properly.
The fastening seams do not stretch.
Do not pour boiling water onto rubber soles.
If the backdrop is very high, try not to break it.
First, it is better to try to break in an uncomfortable pair, but no longer than three days.
The best time to buy new shoes is in the evening, when your feet are a little swollen.
Do not buy sneakers without trying them on, as each manufacturer has its own sizing chart.

How to stretch stretch jeans wider. Tips and tricks

There is almost never a need to stretch stretch jeans, since the stretch stretches on its own after a couple of days of wear, making it fit exactly to your figure. It is recommended to purchase such options in adolescence, when weight and height change quite rapidly.

Do not pull on the straps on your trousers, as they are designed to hold the belt and not to make it easier to put on jeans. Due to the large and frequent tension, they can subsequently come off easily.

It is recommended to remember that you should not place wet jeans on a light-colored surface, which could be a towel, bed linen or carpet, as in this case there is a risk of staining them with the dye used to dye denim.

If you don't have time to do all of the above, which in most cases includes soaking your jeans and then drying them, it is recommended to simply do a few stretching exercises immediately before going out. This will widen the back of the jeans, making them easier to sit in.

If it is impossible to stretch jeans over your hips, you should completely give up trying to stretch them, since the presented methods allow you to increase the size by a couple of centimeters, which would allow you to feel comfortable in the product, but stretching the material a size or two is impossible without damaging the material. In this case, only reshaping the model will help.

How to stretch panties that have shrunk after washing?

Natural fabrics tend to shrink when washed. Stores sell items that are already shrunk, but sometimes after washing the item shrinks again. In some cases, shrunken panties can still be saved.

Pre-soak the laundry in cool water for half an hour. Then place it on an ironing board and stretch it a little with your hands. In addition, the panties can be pulled onto a ring of the desired size.

If the panties are white, you can add 2 tablespoons of hydrogen peroxide to the water.

A mixture of warm water and hair conditioner also helps to stretch the fibers. The laundry is soaked in the solution for 10-15 minutes, rinsed and left to dry. While the laundry is drying, it is carefully stretched by hand to the desired size.

Stretching and enlarging the elastic band is possible at home. This will take effort and time, but it can save your favorite or expensive item. But in any case, it is better to try on the item or study the manufacturer’s sizing chart before purchasing. This will help avoid unnecessary procedures on things.

We suggest you read: How to descale a kettle using vinegar effectively and for a long time

How to stretch jeans in the washing machine. How to stretch jeans after washing

Jeans, like any clothing, have to be washed. But after such a procedure, one very unpleasant moment appears - they sit down. And as a result, it becomes difficult to put them on, although no excess weight has been gained. They are almost impossible to put on, and even if you manage to do so, wearing them is absolutely uncomfortable. This raises a reasonable question: “How to stretch jeans?” And there is an answer to this question! Not even alone.

How to stretch jeans while getting dressed

So you've washed your clothes and they're dry. And now the moment has come when she needs to be dressed. Since many people do not iron their jeans, but put them on immediately after drying, they end up in their hands shrunk, and it is simply impossible to pull them on. In this case, you need to try to put them on, and then perform various movements with your legs. As a result, rough and shrunken fabric will become softer and stretch slightly.

How to stretch jeans by ironing

Using an iron, you can not only smooth out all the wrinkles, but also soften the fabric, which will allow you to stretch it a little. If classic jeans are too tight for you after washing, then you should iron them, wait a little and put them on while still warm. Precisely warm ones, and not cold or hot, since you can simply burn yourself with a hot cloth, but a cold one stretches much worse.

How to stretch jeans by spraying water

If the above methods do not help achieve the desired effect, then there is another one, not particularly pleasant, but effective. In essence, this method is a modification of conventional stretching. To begin, the jeans need to be slightly moistened with water. This can be done using a sprayer. Next, you should put them on wet and perform movements with your butt, which will make them stretch in the right place.

Using the Extender

You can find devices on sale whose main purpose is to stretch jeans. Not everyone, of course, may find such a product necessary, but it copes with the assigned tasks perfectly and does not require any special effort from a person. This method can even stretch jeans with an elastic band at the bottom, the main condition is that they are of high quality and tight, otherwise they may tear. After washing, clothes should not be immediately hung out to dry; they must be buttoned up first. Next, you should install the expander in the belt and fix it there. Then you need to increase its length to the desired one, while the fabric in the waist area will begin to stretch. Once the device is installed and configured, the jeans can be hung out to dry.

Washing recommendations

Finally, we can give a few recommendations regarding washing jeans, which will not avoid, but at least reduce the physical costs of their subsequent stretching and not damage the clothes during this procedure:

- try to buy jeans from high-quality material that is not subject to slight deformation;

- you should buy clothes that are well-made, otherwise they may simply tear;

- use the adapted mode of the washing machine;

- do not put jeans in the dryer, because this will cause the fabric to shrink.

How to lengthen children's jeans

The most interesting and creative process for remaking things is extending the life of children's clothing. Children grow up quickly, durable, high-quality denim material does not have time to wear out and looks good.

To lengthen children's jeans, original inserts are made from bright fabrics

All known methods are suitable for lengthening children's jeans:

original inserts made of bright cotton, woolen fabrics, openwork, lace and decorative ribbons;
cuffs of different colors;
reducing hems without adding material and sewing contrasting or similar fabrics;
changing the width of the waistband or adding an insert in the waistband area.

The methods are suitable for both girls and boys. The difference is that it is better to lengthen children's jeans for boys with plain or checkered fabrics, and for girls with colored ones.

Important! When choosing materials, preference is given to natural, soft, non-fading fabrics.

Inserts are made in places free from pockets and applications that do not create inconvenience for the child. Highly stretchable knitted fabrics, which look sloppy in places where they are seamed with jeans, are unsuitable for inserts.

How to reduce the sewn-in elastic on a belt

June 20, 2020

Elena Ostinova

Womans-way
Has the sewn elastic on your skirt or pants stretched?
How to narrow a stretched elastic band on clothes in the simplest way? We suggest tightening it with a sewn-in decorative cord. Unfortunately, any elastic band tends to stretch over time. How to restore the shape of a stretched elastic band? It would seem that it could be simpler than changing (re-retracting) a new tightening. But in some things it is sewn tightly into a circular pattern.

Changing such a part on a belt or on a sleeve, or on a trouser leg is a separate sewing job. You need to buy a new elastic band, rip off the old one (as carefully as possible), then sew a new one in place of the old one by hand or by machine. It is advisable to do all this carefully. Well, in general the whole story goes something like this...

We propose to simplify the task and reduce sewing work to a minimum.

We will take as a basis the principle by which belts are sewn in most sportswear or summer shorts. This is how, for example, a belt with an elastic band on sportswear is additionally secured with a tightening cord.

Sometimes the lacing that tightens the belt is done on a special additional part. On two patch flaps at the front.

This decorative insert makes it possible to tighten shorts or pants at the waist and at the same time serves as a decorative addition to clothing.

Considering the property of an elastic band to lose its shape (deform) and stretch over time, the industry produces similar products with an additional cord already inserted into it.

In our case, we will use black bias tape (it can be any wide braid or ribbon of your choice) and thin lace.

First, we pin our binding along the entire length of the elastic, leaving a distance of 3-5 cm in front for tying.

Then we attach our patch piece using a sewing machine

And pull the lace inside.

When tightened and gathered, our elastic belt will look like this.

You can play up our addition using decorative ribbon or braid. Diversify the tie with a lace of any color at your discretion.

With a wide elastic band, you can also use braid or ribbon instead of a lace, which can add a decorative flair to your clothing. A beautiful bow will decorate the belt and tighten it tighter at the waist.

So our addition will serve not only as a tightening, but also as an original decor.

If the elastic band is wide, you can sew two strips in parallel, for two laces

Or apply one wide ribbon and divide it into two parts for two ropes

The same tightening system can be made on the inside of the belt. You can act at your own discretion.

As a result, you can use any option and try to tighten (narrow) the elastic on your pants or skirt without tearing it out. Additionally, liven up and decorate the clothes with a colored lace, ribbon or sewn decorative braid of a different color on the belt. And most importantly, you can make such a tightening manually, in extreme cases, without a sewing machine.

What kind of sneakers can be stretched?

Do not rush to begin the procedure of stretching a pair immediately after purchase. Often, after long periods of exercise and shopping, the legs become tired and swollen. Your sneakers may no longer be too tight in the morning. If they still seem small, try stretching them. But first find out what they are made of. Otherwise, there is a risk of damaging them irreparably.

The easiest way to give the desired shape is to sneakers made of suede, leather, or nubuck. Be careful with fabric shoes: if done incorrectly, they can easily become deformed. The most difficult thing to stretch is a leatherette product. This material is difficult to withstand the effects of boiling water, steam, and ice. But it is not easy to stretch it using the usual “wet” method.

When the butt presses

Sneakers can press not only in the heel area, but also along the side edging. It can be stretched according to the same principle as the backdrop. There are several proven methods to make the material softer.

Dampen a soft cloth with water and apply it to the inside of the backdrop. Then tap lightly with a hammer. The heel of the sneaker should be on a hard surface.

If the back of the shoe is made of hard leather or rubber, you can simply massage it with your fingers. The back of a sneaker is especially easy to soften using this method: it is usually made of hard cardboard. To avoid spending a lot of time and effort on kneading, first hold the product over steam. After a few minutes, the skin or material will become more pliable.

The method is suitable for softening the pressing leather elements of sports shoes. An ordinary hair dryer will be useful for this. Hot air stretches the skin, making it more pliable. After heat treatment, simply pull the sneaker with your fingers or put it on your foot. Be careful when heating the seam: there is a risk that the glue will melt from excessively hot air.

Stretching and heating

For the first option, take a chair or ironing board, a small table or an empty drawer. We completely pull the clothing over the item and leave it in this position for at least a day, and preferably for several days. You can first lightly moisten the area with the elastic thread so that the item dries in this position.

A greater effect can be achieved if the item is ironed with a hot iron. Wet the desired area of fabric on a skirt, dress, pants, jacket or other clothing using a damp towel. Alternatively, gently dip the material into water. It should become moist but not soggy. Heat the iron to maximum temperature.

Steam and paper

This is a fairly simple and cheap method for stretching leather, rubber, fabric sneakers and sneakers at home. You need to hold the product over the steam for several minutes. The main thing is to do this carefully so as not to get burned. Then stuff your sneakers with dry, crumpled newspaper. To prevent the upper part of your shoes from becoming deformed, do not dry them with a hairdryer, in the sun, or near a radiator.

To stretch your sneakers, you need to soak a rag in vinegar and then place it in the sock and in the back of the shoe. Instead of fabric, you can use cotton pads. Put on the shoes along with the impregnation and wear for about two hours. The method allows you to lengthen the product by a couple of millimeters.

This is one of the most effective methods, closest to what the masters do. To do it yourself, buy spacers at a shoe store. They are equipped with a screw mechanism, fit any size, and pull leather materials well. In addition to spacers, plastic pads are sold that take into account the characteristics of the foot.

You will also need professional products to treat the surface of the sneakers. This can be a special liquid, stretching foam or spray. This method works well for all types of leather and suede, but is unlikely to be useful for stretching fabric.

Instead of professional products, you can use alcohol-containing liquids. For example, cologne. Or just water. Apply the product externally and internally. Using a screw, set the block to the desired size and position it end-to-end. Keep the spacers inside until the sneakers are completely dry. If you repeat this procedure several times, you will completely relieve yourself of discomfort.

Before using an aerosol or spray, check how the shoe material will react to it. To do this, apply the product to an inconspicuous area. If after a couple of hours the treated area changes color, it is better to look for another drug.

How to stretch stretch jeans wider. How can you stretch jeans width at home?

Tight jeans are a significant problem because they make it difficult to move quickly in them, they can press in awkward places and even chafe your skin. Stretching such trousers at home is carried out in one of the following ways:

spraying;
soak;
steaming with an iron;
stretching with a steamer;
stretching with an expansion device.

Spraying

Suitable if jeans run small or need a little stretch. It’s simple to do: you put the item on yourself and then spray it with water from a spray bottle. Once the fabric is sufficiently dampened, walk around in the jeans until they are completely dry to maintain the effect until the next wash.

Please note that spraying is only suitable for summer use - in the cold season, wearing wet clothes can easily cause you to get sick.

Soak

It is an even more effective method for stretching jeans in width if they cause discomfort in several places at once. It is performed according to the following algorithm:

Fill half the bathtub with warm water and add shampoo or fabric conditioner to it.
While wearing jeans, you need to sit in the bath for 15-20 minutes.
Get out of the bath and let the water drain naturally.
Do a few simple exercises - squats, bends, lunges, etc.
Let the jeans dry a little without removing them.
Remove jeans and hang outside to dry.

The procedure is effective, but in some cases it will have to be repeated several times for the stretch to last longer.

Steaming with an iron

Suitable if you need to stretch your jeans in the waistband, knee area or groin area.
You need to go over problem areas with an iron with the steam system turned on several times until the fabric becomes pliable. Then you need to put on the jeans and wait until they dry directly on the body.

Stretching trousers using a steamer is carried out in the same way, only the process of influencing the fabric will be significantly reduced in time.

Expansion device

If you have a special expanding device called a waistband extender, it is convenient to use it to stretch jeans in the waistband area. To do this you need:

Use a measuring tape to measure to what extent the belt needs to be stretched;
moisten the jeans fabric with water;
fasten jeans with a zipper and button;
place the device inside the belt;
stretch the device to the value obtained when measuring with tape;
leave it in the jeans until the fabric is completely dry.

Stretching an elastic band

There are two ways to loosen the elastic:

Take any item of your choice: a chair, an ironing board, a small drawer or a table. Pull the item over the object and leave it in this state for a day. It's better to wait a few days. The rubber band can be moistened with water.
The most effective way is to iron the elastic with a hot iron. Using a damp towel, it is worth moistening the necessary part of the clothing for stretching. You can dip the item in water. The fabric must not be damp, it must be damp. The iron is then heated to maximum temperature. Next, the clothes are fixed on the ironing board so that the elastic stretches to the desired state. Gauze or any fabric is placed over the elastic band. Then the elastic is ironed with an iron. After such manipulations it should stretch. If necessary, the procedure is repeated. It is important to carry out all actions carefully, since some types of fabrics cannot be ironed even through the fabric.

We suggest you read What to do if water does not flow into the washing machine

Pants with an elastic band are comfortable and convenient. They are used for any occasion. Using simple steps, you can sew an elastic band into the waistband or bottom of trousers at home. It will also not be difficult to replace the elastic band in your pants if it is damaged or stretch it if it is too tight.

How to stretch elastic on different items of clothing

You can stretch the elastic on the waistband of a skirt, dress or pants using the methods indicated above. If stretching methods do not help, you can alter the items and insert a piece of fabric or sew in an insert in the form of a ribbon or zipper. Then the product will immediately increase by one or two sizes. And you will receive a new stylish and original thing. Take the clothes to a sewing shop or make them yourself. Inserting the insert into a skirt or dress yourself is easy. Read more about this here.

The situation is more difficult with a jacket, where there are wide elastic bands on the waist and cuffs. To fix the problem, you need to moisten the problem area, stretch and fix the product. Then iron with a hot iron through damp gauze or cloth or steam. In especially difficult cases, you can sew in new cuffs, for example, knitted ones. They stretch well, look stylish and can be combined with many materials.

Steaming is suitable for items made of natural or artificial leather and eco-leather. These materials are difficult to stretch and change shape. Fill the bathtub with boiling water and hang the clothes on top so that the edges are located at some distance from the water. Leave the products like this for several hours and constantly stretch the desired area. Don't forget to replace cold water with hot water.

On tights and stockings, the fixing elastic band can simply be trimmed slightly on the sides. Do this carefully so as not to damage the fabric of the product. When it stretches to the desired size, reinforce the places with stitches. On socks and panties, the elastic band often consists of several strands of spandex. Here we stretch the material and in the process we cut the threads every second or third row.

You can stretch the elastic on your panties by soaking the product in water and placing it on the back of a chair or ironing board. Leave the panties until completely dry. The elastic band will begin to stretch.

The most reasonable solution

If, after purchasing the sneakers, you realize that they are too tight, it is best to return or exchange them in the store. According to Russian laws, any buyer can return a new product under warranty within two weeks. To do this, you need to present your passport, cash receipt and warranty card. The main thing is that the shoes are in the same condition as when purchased. It should not show signs of use: creases, abrasions. Make sure all pads, insoles and laces are in place.

If the pair is old, or you were unable to return it under warranty, the best decision would be to take it to a professional repair shop. A shoemaker knows how to stretch sneakers or sneakers.

Each shoe has its own suitable products. Special pads with screws that can stretch any material help increase the length. Masters use different creams, aerosols, powders that can cope with an uncomfortable pair. The shoemaker will take into account all your wishes and features of the foot, and will stretch the sneakers in the area of the bone.

If this method does not suit you for some reason, you can try enlarging your sneakers or sneakers at home.

Alcohol and laundry soap

This method works well to expand leather sneakers. You need to follow these steps sequentially:

Pour alcohol or vodka into your shoes (cologne will do).
Rub the inner surface with soaked laundry soap.
Let the resulting composition dry.

This method has some nuances. In particular, if the interior of the sneakers is made of low-quality material, then a bad smell will appear in them. Getting rid of it in the future will be problematic. If this is your case, forget about soap, use only alcohol (vodka, cologne).

To do this, moisten the inside of the product generously, put it on your feet and pour alcohol on the outside of the sneakers. You need to wear the shoes for about two hours. This way you will not only stretch the tight pair, but make it softer. The method is suitable even for sneakers made of synthetic materials. But if the sneakers are made of genuine leather, they need to be rubbed with special protective agents or castor oil before being treated with alcohol.

The flammable liquid can be used as an alternative to soap and alcohol. The processing principle is the same: lubricate the inner surface of the shoes with kerosene and wear for about an hour. As with laundry soap, there is a risk that a difficult-to-remove odor will appear in your sneakers.

Window cleaner

The method works on the principle that glass and mirror cleaning liquid contains alcohol. Proceed according to the following instructions:

Spray your sneakers liberally, inside and out.
Wear your shoes with thick socks.
Wear for about two hours.

The effectiveness of the method has been confirmed by many sports shoe lovers.

It can be used for natural materials and leatherette products. Another advantage of this approach is that the smell of the washing liquid quickly disappears.

This approach is only suitable for leather shoes that can withstand 300-degree boiling water. The procedure requires some courage, since boiling water must be poured inside the product and left for 8 minutes. Then drain and let the skin dry at room temperature. Never use this method to expand products made from synthetic materials. Otherwise it will lead to deformation.

The so-called “military” method is suitable for stretching leather and fabric products. Just soak your socks in water, put them on with your sneakers and wear them until they dry completely. To remove excess moisture from shoes, after the procedure, shoes should be stuffed with crumpled newspapers.

Lengthening sports pants

For the production of sportswear, elastic, knitted fabrics are usually used, so the best material for lengthening them is knitted elastic.

A cuff is cut out of it, which is sewn to the lower edge of the trouser leg. The cuff will be double, so its height is multiplied by 2 and a seaming allowance of 1.6 cm is added.

Sequencing:

The cuffs are sewn down along the side seams, turned seam inside out and folded in half.
Combine the inner seams of the trouser leg and cuff, baste the seam, stretching the elastic evenly.
Once everything has gone well, the part is sewn on with an overlock or zig-zag stitch, loosening the top thread.

Various finishing inserts made of contrasting, transparent or color-matching materials will help you lengthen your sweatpants.

The best option is if the fabrics match in stretchability, so that the stitching area looks neat. The inserts are placed under the knee, at knee level or at the bottom of the trouser leg.