Among the fasteners for clothing there are buttons that are not sewn on, but are installed in a specific place using a special device. Like a sew-on button, such a button consists of two parts; in one of the parts (the top one, which is visible from the front side of the garment) there is a hole, and in the other (bottom) there is a cylindrical protrusion corresponding to the diameter of the hole. When the cylinder enters the hole, the button parts close together and connect the garment parts on which they are installed to each other. Unlike a sew-on button, each part of the button shown in the photo consists of two more parts, which are installed on both sides of the fabric and tightly fixed into each other.
If you have a need to shorten the sleeve of a purchased shirt, and there is nothing else left to do but tear off the cuffs, trims and facings, cut off the excess length from the bottom of the sleeve, decorate the cut at the bottom of the sleeve with the same facings and trims (since the shirt was not sewn by you, and a suitable there is no new fabric for the pattern), sew cuffs to the new line of the bottom of the sleeves, you may encounter the following situation. One of the parts of the button fastener may be located very close to the edge of the facing or even partially extend onto the fabric of the sleeve part; in this case, it will not be possible to sew the facing to a new place without dismantling the button, since it will prevent the sleeve fabric from entering between the layers facings.
Let's try to carefully dismantle (remove from the fabric) the lower part of the fastener button and install it in a new place.
We will need: a thin flat-head screwdriver and pliers.
Removing the fastener part
Carefully insert the end of the screwdriver between the fabric and the base of the fastener button, checking if there are spikes that attach the base to the fabric. They are there, but they are short, so we slightly bend the base disk to remove the spikes, but not damage the fabric or break the button. This way we check the details of the button on both sides of the fabric.
Now we place the screwdriver between the base of the fastener button and the fabric from the inside, as deep as possible, carefully scroll and separate the parts of the button from each other. A hole remains in the facing the size of the button cylinder.
Leather jacket repair
Privacy Policy
The administration of the site https://masterskie-stoeva.ru/ (hereinafter referred to as the Site) treats visitors to the Site with respect. We recognize the importance of privacy of the personal information of visitors to our Site. Please read the following privacy policy information, by which you consent to the collection, storage and use of your personal information in accordance with this policy.
Collection of information
Like many other websites, our Site uses log files that contain statistical information about users of our Site, such as IP address, operating system and browser type. This information is used for official purposes to administer the Site. The Site collects personal information that you provide voluntarily when visiting or registering on the Site, such as your name or email address. You can view the content of the Site without going through the registration procedure, but you will need to register to take advantage of some of the Site's functions.
Denial of responsibility
You can disable Cookies through certain settings in your browser.
Please be aware that the transmission of personal information when visiting third-party sites, including websites linked to on our Site, is not covered by this document. The Site Administration is not responsible for the actions of other websites. The process of collecting and transmitting personal information when visiting these sites is regulated by the “Privacy Policy” or similar documents that are located on the sites of these companies.
Terms of Service
Ownership of the site; agreement to terms of use
These terms and conditions of use (“Terms of Use”) apply to the website (the “site owner”) located at https://so-invest.ru/ (the “Site”). BY USING OR MAKING A PURCHASE FROM THE SITE, YOU ACCEPT THESE TERMS OF USE; IF YOU DO NOT AGREE WITH THE TERMS, DO NOT USE THE SITE.
The site administration reserves the right at any time, at its sole discretion, to change, add or delete clauses of these Terms of Use. It is your responsibility to check these Terms of Use periodically for changes. Continued use of the Site after changes are posted constitutes your acceptance of those changes. Subject to your compliance with these Terms of Use, the site administration grants you a personal, non-exclusive, non-transferable, limited right to visit and use the Site.
Content
All text, graphics, user interfaces, visual interfaces, photographs, trademark names, logos, sounds, music, images and programming codes (collectively, "Content"), including, but not limited to, design, structure, selection, coordination, appearance , the general style and arrangement of this Content included in the Site is owned, operated and licensed by the owner of the site and is protected by trade, copyright, patent and trademark laws, as well as other rights relating to intellectual property and laws of unfairness. competition.
You may use information about products and services contained on the Site that is specifically made available by Company for downloading from the Site, provided that you (1) leave all copyright notices in all languages on all copies of such documents, (2) do not make There are no changes to such information.
Use of the Site
You may not use any deep linking, web scraping, robot, spider or other automatic device, program, algorithm or method, or any similar or equivalent manual process to access, acquire, copy or monitor any portion of the Site or any Content; You may not reproduce or circumvent in any way the navigational structure or presentation of the Site or any Content to obtain or attempt to obtain any materials, documents or information through any means not specifically made available through the Site. The site owner reserves the right to block any such actions.
You may not attempt to gain unauthorized access to any portion or feature of the Site, any other systems or networks related to the Site, or any services offered on or through the Site, through hacking, password mining, or any other unlawful means.
You may not identify, scan, or test security flaws in the Site or any network related to the Site, or breach the security or authentication system of the Site or any network related to the Site. You may not reverse lookup, trace or attempt to trace any information about any other user of or visitor to the Site or any other customer on the Site, including any accounts not owned by you, to its source, or exploit the Site or any service or information available on The Site or offered through the Site if the purpose is to disclose any information, including, but not limited to, personally identifiable information or information that does not belong to you, under the terms and conditions set forth by the Site.
You agree not to take any action that imposes an unreasonable or disproportionately large load on the infrastructure of the Site or the systems or networks connected to the Site.
You agree not to use any device, software or routine to interfere or attempt to interfere with the proper functioning of the Site or any transactions being conducted on the Site, or any other person's use of the Site.
You may not forge headers or otherwise manipulate identifiers in order to disguise the origin of any message or data you send through the Site or any service offered on or through the Site. You are prohibited from impersonating another person, organization or representative of another person.
You may not use the Site or any Content for any purpose that is prohibited by law or these Terms of Use, or to solicit any illegal activity or other activity that violates the rights of others.
Purchase. Other terms and conditions
Additional terms and conditions may apply to the purchase of goods or services and to certain portions or features of the Site, including contests, promotions, etc.; by this reference, all provisions thereof are incorporated into these Terms of Use. You agree to be bound by these other terms and conditions, including, where applicable, your representation that you are of sufficient legal age to use such services or participate in such activities. These provisions apply to the extent that there is any inconsistency between these Terms of Use and the provisions that apply to a particular portion of the Site or any service offered on or through the Site with respect to your use of that portion of the Site or a particular service.
The Site Owner's obligations, if any, with respect to Company's products and services are governed solely by the agreements under which the products and services are provided, and nothing on the Site should be construed as modifying those agreements.
The Site Owner may make changes to any products or services offered on the Site or to the prices applicable to any such products or services at any time without notice. Materials related to products and services published on the Site may be out of date, and the Site Administration does not undertake any obligation to update Site materials related to products and services.
Links to other sites
This Site may contain links to certain independent third party websites (“Linked Sites”). Linked sites are provided solely for the convenience of visitors. The site administration does not control such Linked Sites and is not responsible for them and does not endorse the content of such Linked Sites, including any information or materials located on such Linked Sites. You must make your own independent decisions regarding your use of these Linked Sites.
Denial of responsibility
THE SITE MAKES NO PROMISES THAT THE SITE OR ANY CONTENT, SERVICE OR FEATURE OF THE SITE WILL BE ERROR-FREE OR UNINTERRUPTED, OR THAT ANY DEFECTS WILL BE CORRECTED, OR THAT YOUR USE OF THE SITE WILL RESULT IN ANY WAY. NEW RESULTS. THE SITE AND ITS CONTENT ARE PROVIDED ON AN “AS IS” AND “AS AVAILABLE” BASIS. ANY INFORMATION ON THE SITE IS SUBJECT TO CHANGE WITHOUT NOTICE. THE SITE ADMINISTRATION DOES NOT WARRANT THAT ANY FILES OR DATA YOU DOWNLOAD FROM THE SITE WILL BE FREE OF VIRUSES OR UNDESIRABLE OR DESTRUCTIVE FEATURES. THE SITE AND THE SITE OWNER DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF ACCURACY, NONINFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SITE DISCLAIMS ANY LIABILITY FOR THE ACTS, OMISSIONS AND CONDUCT OF ANY THIRD PARTIES IN CONNECTION WITH YOUR USE OF THE SITE AND/OR ANY SERVICES. YOU ASSUME ALL RESPONSIBILITY FOR YOUR USE OF THE SITE AND ANY LINKED SITES. YOUR SOLE REMEDY AGAINST THE SITE IN THE EVENT OF DISSATISFACTION WITH THE SITE OR ANY OF ITS CONTENT IS TO STOP USING THE SITE OR ANY SUCH CONTENT. THIS LIMITATION OF REMEDIES IS PART OF THE AGREEMENT BETWEEN THE PARTIES.
The foregoing limitation of liability applies to any loss, liability or damage caused by any failure of operation, error, failure to comply with conditions, interruption, deletion, damage, delay in operation or transmission, computer virus, communication line failure, theft, destruction, unauthorized access, alteration or use, whether for breach of agreement, tort, negligence or any other cause of action.
The site administration reserves the right to take the following actions, which can be performed at any time and without notice: (1) change, suspend or terminate operation of or access to the Site or any part thereof for any reason; (2) change the Site, any portion thereof, and any applicable policies or terms; (3) interrupt the operation of the Site, or any portion thereof, as necessary to perform routine or emergency maintenance, error correction, or other changes.
Disclaimer
Except as prohibited by law, under no circumstances will the Site Owner be liable to you for any indirect, consequential, punitive, incidental or exemplary damages, including loss of profits, even if the Site Owner or the Site Administration has been advised of the possibility of such damages.
Violation of these Terms of Use
The Site may disclose any information we have collected about you (including your identity) if we determine that such disclosure is necessary in connection with any investigation or complaint regarding your use of the Site or to identify, contact, or bring legal action against someone who may violate or interfere (either intentionally or unintentionally) with the rights or property of the Site Owner or the rights or property of visitors or users of the Site, including customers on the site. The site administration reserves the right at any time to disclose any information it deems necessary to comply with any applicable law, regulation, court order or government request. The site owner may also disclose your information if it determines that applicable law requires or permits such disclosure, including exchanging information with other companies and organizations for fraud protection purposes.
You acknowledge and agree that the Site Administration and the site owner may store any data or messages sent between you and the site owner or between you and the Site through the Site or any service offered on or through the Site, and may also disclose such data if required by law or Site Owner determines that such preservation or disclosure is reasonably necessary to (1) comply with a court order, (2) enforce these Terms of Use, (3) respond to complaints that any such data is infringing third parties, (4) protecting the rights, property or personal safety of the site owner and site administration, users or visitors of the Site and the public.
You agree that the site may, in its sole discretion and without prior notice, terminate your access to the Site and/or block your future access to the Site if we determine that you have violated these Terms of Use or other agreements or guidelines that may be related to your use of the Site. You further agree that any violation by you of these Terms of Use constitutes an unlawful and unfair business practice and will cause irreparable damages to the site owner that cannot be measured in monetary terms, and you consent to the site owner obtaining any injunctive or equitable relief, which the site owner deems necessary or appropriate in such circumstances. These remedies are in addition to any other remedies that the site owner may have at law or in equity.
You agree that the site administration may, in its sole discretion and without prior notice, terminate your access to the Site for reasons that include (but are not limited to) (1) requests from law enforcement or other government agencies, (2) your request (deletion of account voluntary entries), (3) discontinuance or modification of the materials on the Site or any service offered on or through the Site, (4) unexpected technical problems or problems.
You agree that the Site Owner will not be liable to you or any third party for termination of your access to the Site as a result of any violation of these Terms of Use.
Current legislature. Dispute Resolution
You agree that all matters relating to your access to or use of the Site, including all disputes, will be governed by the current laws of the Russian Federation without regard to its conflict of law provisions. Any claim with respect to these Terms of Use must be brought within one (1) year after the cause of action arises, otherwise such claim or cause of action is barred. No award may be claimed or received for damages other than actual costs, except that the prevailing party will be entitled to costs and attorneys' fees. In the event of any controversy or dispute between the Site Owner and you as a result of or in connection with your use of the Site, the parties shall attempt to resolve any such dispute promptly and in good faith. If we are unable to resolve such dispute within a reasonable time (not to exceed thirty (30) days), then either party may submit such disagreement or dispute to mediation. If the dispute cannot be resolved through mediation, then the parties are free to exercise any right or remedy available to them under applicable law.
Reviews and information
Any feedback provided on this site is considered non-confidential. The Company is free to use such information without restrictions.
Customer reviews posted on the site describe special cases; for each user, the effectiveness of the training materials provided is individual, depending on the level of training, mindset, approach to classes and other learning conditions.
The information on this website is subject to change without notice.
Installing the snap button part
We stitch the facing to the corresponding side of the new cut. We make a hole in the sleeve fabric between the facing layers.
From the reverse side, insert the lower part of the button-fastener into the hole, the fabric of the hole should tightly surround the cylinder of the button, cut off the fringe, and press the fabric tightly to the base of the button. From the front side we put the upper one on the lower part of the button. Using pliers, lightly squeeze them (be careful not to damage the shape of the protrusion) until you hear a click (there should be a click, it indicates that the parts of the button fastener fit tightly into each other and will not separate without impact).
This is how you can carefully move the bottom part of the button yourself without using special equipment.
Source: howtosew.ru
TOP best buttons
It is important to pay attention to the choice of accessories. Poor quality parts will not hold well and come loose. You should not skimp on accessories and choose products from dubious manufacturers. Cheap parts can quickly become unusable already at the installation stage. A large number of them will go to waste, and instead of benefiting you will incur additional costs.
- HEMLINE is a popular brand all over the world. The rivets and tools for their installation are famous for their high quality, durability, availability and range.
- The German manufacturer PRYM is the oldest brand with a well-deserved reputation. The price of the products is quite affordable. For people who often need such products in Russia, a convenient set of parts with tools is presented.
- The fashionable tandem Cobrax and Rili have conquered the market with the originality and reliability of their products. They produce expensive branded accessories, which are appreciated by fashion designers all over the world.
- The brands “MV-Fittings” and “Trade-Decor” can be considered Russian representatives of quality products. You can order a custom design here.
Before purchasing, study consumer reviews and consider the type of fittings that will suit your product. Compare prices and choose the best option.
Even the seemingly difficult work of installing or replacing buttons on clothes can be done at home using simple improvised means. Useful tips and skills will help you cope with this task.
Source
Remove the ring button. How to remove a button from clothing.
How to remove an unnecessary button on clothes.
It is best to use a side cutter: For the upper part of the button, gently squeeze, turn the side cutter at an angle of 90°, and squeeze again. Ready. For the bottom part of the button it is a little more difficult - it is important to grab the button along the diameter and at the largest possible angle with a side cutter
Squeeze Then we bring one cheek of the side cutter under the base of the button and gently squeeze. It may not work at once; we crush the metal until it falls off. Practice, you will succeed.
Please note: For maximum ease of use, purchase side cutters with the cheeks as flat as possible.
2. Drilling. This method must be used very carefully, as you can wrap the fabric of the product around the drill and damage it irrevocably. It is worth using drilling if there is no other tool at hand.
We clamp the inside of the button with pliers and use a Ø4mm drill to carefully drill out the flared part of the button.
We do the same with the response part of the button.
Once again, I would like to remind you that the drill should not touch the fabric of the product, otherwise the product will be irrevocably damaged.
Attention: high-quality installation of fittings can only be done in an atelier or workshop using appropriate professional equipment.
Have questions. Write, we will answer
Source: club-snap.su
Varieties
Clothes buttons differ in the material they are made of:
- metal;
- plastic.
According to the method of fastening they can be:
- installation - secured using special tools;
- sewn - to attach them you need a thread and a needle.
Depending on their form, purpose and application, they are divided into:
- simple;
- s-shaped;
- shirts;
- magnetic;
- clasp;
- holsters;
- straps;
- tablet
O-shaped
The most common type of buttons is o-shaped. They are called simple, ring or flight, because the fastener first appeared on jackets and overalls of pilots. The design is not complicated and consists of two metal parts that fit tightly into one another. The upper component has a spring fastening.
At first, the upper part was produced in an all-metal form; today the cast version is more often used.
Simple buttons are used both on different types of everyday clothing and on specialized textiles.
S-shaped
This type is of the spring type. One of the parts resembles the letter “S”, which is why they are called s-shaped. Depending on the size they are divided into several types:
- uniform - the size of the top ranges from 27 to 40 mm;
- article - half the size of the uniform;
- anorak - compact size;
- mini anorak - the upper part is less than 8 mm.
The shape of the top is varied - from flat and round to diamond-shaped, square, drop-shaped. They are fixed by sewing or fastening. The large spring allows it to withstand heavy loads.
Shirt
Shirt-type buttons differ from regular ones in the way they are fastened - not with a single pin, but thanks to 6-8 spikes. The design allows fastening fasteners on fabrics of light density. They are suitable for children's clothes, knitwear and knitted clothes, light summer jackets.
The devices are convenient to use, but quite expensive to manufacture. During installation, the material is pierced with spikes located on the ring. Their diameter varies from 9.5 mm to 40 mm. The largest ones are used on jackets.
How to replace correctly
The procedure for replacing the matrix depends on the specific TV model. Differences in the procedure for disassembling and installing a new element are associated with the unequal design of the devices. Screws or latches are used as fastening elements. The TV is disassembled from the front or back.
When accessing from the front, release the latches holding the facing of the television panel. After disconnecting the latches, access to the matrix, screwed to the body with screws, opens. To dismantle, remove the fasteners on the rear wall, then install a new component and reassemble in the reverse order.
Since the case uses screws of different lengths, it is worth remembering their positions. Having disassembled the case, all that remains is to remove the matrices and install a new screen.
The matrix installation procedure itself is not particularly difficult, but it is important to follow the sequence of actions. In particular, you need to perform the following steps:
- After disassembling the case, a matrix is visible on which electronic boards and cables are fixed. The components are disconnected after first photographing their location.
- Disconnect the cables along the perimeter of the TV. In some types of devices, the cables are hidden under the frame.
- Having removed the matrix, it is placed next to the working one and the modules and electronic boards are transferred one by one. Immediately after transferring the board, the corresponding cable is connected to it.
- When a set of modules is connected, the case is assembled and the functionality of the display is checked.
In order for the device to function correctly, it may be necessary to match the new matrix to the modules. To do this, you need to turn on the TV, go to settings and launch the corresponding function. The detailed process is described in the instructions supplied with the equipment and may vary slightly.
Instructions for replacing the button
To install a new fastener, you need to perform several steps:
- Dismantle the old one if it is out of order.
- Use an old hole or make a new one.
- Insert a button into the hole.
- Put on the fixation ring.
- Use a flat surface to install the fastener.
- Divide it into four parts with a punch.
- Roll the petals with a hammer.
It is worth having several spare buttons so that you have something to replace damaged ones, since the pin petals often break.
Removing the old button
The process of removing an old, failed push-button fastener is simple, but it is important not to damage the fabric. You should prepare a pair of pliers and a knife whose blade does not bend
You should prepare a pair of pliers and a knife whose blade does not bend.
- At the bottom of the fastener, carefully place the blade of a knife between the button and the material from the underside of the product and bend the metal edge.
- Do the same on the front of the garment, symmetrically to the back.
- The edge should be bent so that you can grab it with pliers.
- On both sides of the fabric, grab the folded edges with pliers and, using a little force, separate the two parts.
- To remove the upper part, use pliers to grab its front and back parts and, twisting, separate it.
Gluing the front part
To attach the front part, perform a series of sequential actions:
- Prepare a wooden plank.
- Make a hole for the fastener using a thick awl or punch.
- Insert the button cylinder into the prepared hole.
- Place the spring part on top.
- Roll the edge using a tapered awl.
To avoid rapid fraying of the edges on synthetic fabric or the formation of torn edges, the awl is heated over a fire before piercing the fabric.
Assembly of the reverse part
To assemble the lower part, you need to prepare a small device. It is a board with a hole slightly larger in size than the part. The tool used is a hammer with a flat striking surface.
The order of the operation is as follows:
- Make a hole using an awl or punch.
- Insert the button into the notch.
- Pass the fabric into the second part of the reverse part.
- Combine both parts.
- Connect the parts with a gentle blow of a hammer.
What glue is suitable for repairing truck awnings?
The awning is a canvas made of synthetics, banner fabric, tarpaulin, PVC. For the repair of these materials, only certain compositions are suitable, ensuring reliable connection of several spare parts with each other.
Special glue for PVC “Winstik”
Winstik adhesive solution for PVC allows you to create a strong and transparent seam that is resistant to the influence of liquids, while maintaining its elasticity. The composition dries within a couple of days at room temperature.
"Desmokol"
Polyurethane adhesive "Desmokol" is intended for repairing PVC fabrics. The solution is transparent, so it does not leave marks or streaks after drying. Due to its easy flammability, contact of the substance with heating appliances or open fire should be avoided during operation. After application, the solution provides a strong connection of the surfaces, without the risk of displacement and tearing of the patch from the awning structure.
"Cosmofen"
The Cosmofen mixture has universal characteristics, which allows it to be used with any materials. Quick-setting cyanoacrylate adhesive is easy to apply and requires tight compression of the treated area with a press for a strong connection. The solution endures ambient temperatures of up to +80 degrees, so the seam should not be exposed to more heat to prevent the glue from melting. Due to the release of toxic components when using Cosmofen, it is necessary to repair the car awning in a constantly ventilated area.
Rapid
The thermoplastic composition of the Rapid brand reliably eliminates defects on the awning, maintaining the tightness of the canvas in the damaged area. The adhesive must be used in combination with a hardener and heated before application. The solution is suitable for repairing fabric awnings.
How to put on a denim button?
To install the simplest button on jeans, proceed as follows:
- Poke a hole in the waistband of your trousers with an awl.
- Insert the button shank into the hole.
- Place the button on an anvil (on a metal surface) and hammer in the shank. It is the leg, not the button, otherwise you will damage the decorative element.
Important! To install a button of a more complex design, the leg of which will move freely, you will need a dowel cut down on sandpaper, since the leg of such a button will need to be flared on the button itself. Step-by-step instructions on how to install buttons on clothes at home:
Step-by-step instructions on how to install buttons on clothes at home:
- Thread the stem of the button into the waistband.
- Place the button on the shaft.
- Assess how far the stem extends from the button. If necessary, “bite off” the edge of the part with pliers. Otherwise, the leg will bend and it will be impossible to flare it.
- Place the button on the anvil.
- Place the dowel on the center of the button shank and, by lightly tapping with a hammer, flare the shank until it fits snugly with the cap body.
