How to increase your pants size: clever life hacks that will allow you to fit into your favorite jeans, even if they are too small

Sometimes there comes that terrible moment when your favorite trousers don’t fit on your hips or don’t meet at the waist. After several hours of anger and bad mood, you have to accept this fact and go to the store for new clothes. But don't rush into buying.

There are times when excess weight is a temporary phenomenon. For example, when you’ve gained a few kilograms after the holidays, but you’re already holding a gym certificate in your hands. Or when extra weight is a reason to be happy because it is associated with pregnancy. In such situations, you should act wisely and increase your clothing size in any suitable way. So what can you do with skinny pants?

Stretch

If the waistband of your jeans is literally two centimeters short, you can do without a needle and a sewing machine. This method will also be needed when jeans can be worn, but they put a lot of pressure in the abdomen and cause discomfort. Its essence is to stretch the fabric using moisture and temperature. To do this, you should wet the top of your clothes in water, and then, using an iron with steam, tighten the belt.

You need to be very careful not to damage the fabric.

By repeating these steps several times, you can achieve the desired effect.

Stretching

Now you need to consider more gentle ways to increase your trouser size at home. The methods will help if you need to stretch the products not much at all.


If the fabric is stretchy, you can use physical effort to pull it towards you.

Spraying

The procedure requires a spray bottle; clean warm water is poured into it. Then the belt is wetted inside and out. The material must be saturated with water. Using smooth movements, stretch the belt, but do not touch the material where there are abrasions, otherwise it can be torn. After drying, the result is checked with a centimeter.


Any sprayer will do

Soak

This option is quite simple, but at the same time it gives the desired result. Sequencing:

  1. Put on pants, fasten all the zippers, buttons and zippers.
  2. The bath is filled with warm water.
  3. They dip into it and stay for a while. Hands carefully pull the pants in the area of ​​the waist, hips and inner seam. The problem area is treated for 10 minutes.
  4. After 15 min. the fabric will begin to stretch.
  5. After leaving the bathroom, do not take off your trousers for 10 minutes. During this time they will dry out a little.
  6. Do several physical exercises aimed at stretching.
  7. Take off your pants and hang them to dry completely.
  8. The product is put on again, but in dry form.
  9. Repeat several exercises. If necessary, the algorithm of actions is duplicated until the trousers increase in size.


You'll be able to stretch your stretch pants the first time.
Another option for soaking clothes is done using vodka. The method increases the elasticity of the fabric and straightens the fibers. What you need to prepare:

  • water - 5 l;
  • vodka - 1 tbsp. l.;
  • ammonia - 3 tbsp. l.

How to widen your trousers:

  1. Pour warm water into a basin.
  2. Add all ingredients and mix.
  3. Immerse the product in the solution and leave for 40 minutes.
  4. Then squeeze, rinse, hang to dry.

Dry mechanical stretching

This method is the simplest. You will need to put on pants and actively move in them. You can jump, squat, run. The product must be thoroughly disassembled. Dry mechanical stretching works if there is a slight shrinkage of cotton pants after washing. Excessively dried fabric wrinkles, but it can be easily returned to its original state.


Squats will help you effectively stretch your pants.

For the first 10 minutes, a person will feel obvious discomfort. Moving in tight pants is not easy. But the material will soon stretch, and the product will fit exactly to your figure. Exercises include squats, bicycle, scissors, and leg swings. Some people come up with different options for extenders that, without sewing, will help make pants looser in the waistband.

You might be interested in this: Beautiful bra patterns for sewing yourself


Creative ways to expand products

Things not only shrink after washing, but also become small if a person has gained weight. There is no need to rush to throw away your pants. They are expanded with the help of different inserts and stripes. There are also alternative solutions when it is necessary to increase the size of your pants by just a few millimeters. These include soaking, spraying problem areas with a spray bottle, and special devices for stretching.

Extend the clasp

This option will be especially useful for pregnant women for whom a tight button presses into the stomach. His idea is to extend a regular fastener with an elastic band. To do this, you should buy 5-10 cm of special belt tape with holes. On one side of this cut you need to sew a button of the required size, and then attach the device as in the photo.

The only disadvantage of this method is that you have to hide the elastic under long clothes.


Increasing the size of leather trousers along the entire length

The inserts are rectangular, the length is equal to the length of the product. Almost the same thing, the same eggs, only in profile.

The principle is the same. First, we rip off the belt and rip the side seams all the way to the bottom. We cut out and sew the inserts.

If the belt is still enough, then simply redo the fastener, for example, instead of a button, fasten a hook at the very edge, or rearrange the button. If you have gained considerable weight, then it doesn’t matter either - you need to increase your belt. There will always be a piece of black leather.

I never throw away old leather jackets, trousers, even bags, because such valuable material can always be useful for alterations.

A piece of fabric that matches the color can also be useful, for example, to add a belt at the back.

In this case, two rectangular strips are made in each side seam.

I would like to draw your attention to a small device - it was not added by chance, not just for decoration. This belt serves another purpose - if you lose weight at the waist, you can reduce the size a little. Need an extra piece, a buckle, a few rivets.

You may be interested in:

How to increase your trouser size by inserting stripes into the side seams

I have already written about this method of increasing the size using rectangular inserts or braid using the example of my regular classic trousers. I not only spaced them out in volume, but also lengthened them around the waist. The contrasting stripe on the sides is in complete harmony with the rest of the decor, so it does not look like something alien.

How to lengthen short children's trousers if the child has grown up

Children grow up very quickly, and before you know it, your favorite pants are already too small. What to do? The answer is simple - slightly alter it, increase the length. There are many ways - a cuff at the bottom of the legs, adding material in the middle around the knees, where the fabric most often wears out, a new wide belt, straps.

Leather inserts on stretch trousers - a sewing master class

Another work by Nina, she never sits idle, she creates all the time, invents something new, alters it, tries it. This time it's skinny stretchy knitted leggings. But not simple ones, but equipped with spectacular leather additions on the front, machine-stitched in the form of a lattice.

Make inserts

If you need to increase the width of your trousers by ten centimeters, you can insert triangular wedges into the waistband. Depending on the desired result, they will be large or completely invisible. They can also be hidden under belt loops or turned into bright decor in the pocket area. Both thick material and stretch material of any color and pattern are suitable for this. You can also use a very wide elastic band so that the size can be easily adjusted to your figure.

To make the work look neat, you should cut out a fabric diamond and then sew it folded onto the cut site.

How to increase hip width

To add volume to the pants in the hip area, you will also have to use inserts. In this case, they will be longer than the wedges in the belt. The length of the element is determined in each case individually .
It depends on the level at which the feeling of narrowness of clothing arises. The work is done in the same way.

  • We rip off the belt.
  • Unmask the side seam.
  • We attach inserts and process each line.
  • We measure the line of the upper cut, compare it with the belt, find out how much it needs to be lengthened.
  • We increase the belt.
  • We attach the belt, performing all the necessary processing.

Sew stripes

The method with side inserts will allow you not only to prolong the life of your favorite trousers, but also to make them fashionable. Therefore, it will also be useful for those people who do not need to increase their size, but want to show their individuality through their appearance.

You should open the side seams and insert a long strip of fabric there. Focusing on your own style, you can use a ribbon with longitudinal stripes or lace fabric. For classic clothes, you should take a piece of fabric similar to the main one.

What problems might there be?

Using the above methods for jeans is quite difficult. And here are the reasons:

  • Jeans is a fairly thick fabric. Not every machine can handle such material.
  • Having unraveled the outer decorative seam, you will have to re-lay it. For this work you need a special denim thread.
  • The thickness at the deferment point is quite large. Therefore, when working, it is necessary to reduce the thread tension and increase the pitch. Only a #90 needle can be used.

As you can see, embroidering and sewing jeans is quite difficult at home, and it is better to entrust this work to specialists from the studio.

If you decide to stretch cotton or denim jeans yourself, then use proven methods and available tools. We offer several simple ways to stretch denim trousers. Choose the option that is most suitable for you and begin “reanimation”.

Change belt

There are times when jeans stretch well at the hips, but the tight waistband makes it difficult to fasten them. Then this piece of clothing can be completely removed. The role of a belt and fastener can be performed by a wide ribbon, a thin shawl or other fabric, which should be attached to the main part in a circle.

This option looks especially good on summer trousers and shorts, when denim or linen is combined with a light floral print. For the convenience of a pregnant woman, a large piece of jersey with a tie at the top should be inserted, which will completely cover the belly.

For each of these methods, it is worth using a sewing machine to ensure that the product is neat and the seams are secure.

The existence of many options proves that trousers that are too small are not a reason to spend money, but a reason to use ingenuity.

Don't throw away your trousers and jeans

This situation often arises when your favorite jeans become too small. What should you do with them, throw them away?

Don't rush, you'll still have time to throw it away. Let's find ways to deal with the problem ourselves.

If you bought jeans that are too tight, you can stretch them. Do this trick with them:

  • Take a spray bottle, pour warm water into it and wet the waistband of your pants well.
  • Then start stretching. Where there are abrasions, stretch more carefully and softly.
  • Don't let it dry right away. Stretch while drying, otherwise there will be no result.

Many girls simply sit in their jeans in a bathtub of water. Then they let them dry on their body without using any additional drying equipment such as a hairdryer.

Or wet your jeans and put them on lying on the floor, it’s more comfortable. Also let it dry on your body. After the next wash, the items may shrink again, then this procedure will have to be repeated again. What can you do? Take scissors, a needle and thread, and widen the pants where they are too small.

Repair using a spider web

Is it possible to increase the size of a product using a web? Can be expanded by the amount of allowance on the sides.

Cobweb is a special material consisting of thin adhesive fibers.

How to glue cobwebs to fabric?

  1. First, open the seams on both sides of the product and smooth it with an iron.
  2. Measure out the required amount of web. Add 1cm on both sides for overlap.
  3. From the inside out, apply the mesh so that the edges of the seams of the product are located close to each other, leaving no gaps.
  4. Using a heated iron, iron over the paper base, then remove it.
  5. Place the other side on top to cover the adhesive base by 1–2 mm.
  6. Iron the surface to ensure good adhesion. You can put gauze on top and iron through the gauze.

If the seam stands out, you can sew on stripes.

Such products must be washed by hand and not often, otherwise the cobwebs will come off.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]