How to wash faux fur: is it possible in an automatic washing machine, rules for hand washing, methods of dry cleaning at home

Almost every person has faux fur items in their wardrobe. However, not everyone knows how to properly care for them.

Can they be washed in a machine or in a basin? What detergent should I use to remove stains? Will synthetic bristles deteriorate after contact with water?

How to properly wash faux fur at home? Answers to these and other questions can be obtained if you read the article to the end.

Is it possible?

If the faux fur gets dirty, you can wash it. Most products tolerate such treatment well and do not lose their attractiveness.

Conditions to be observed:

Study the information indicated on the label. The manufacturer's recommendations should not be violated.
If the fur comes off, it is better to remove it and wash it separately from the main product.
Before you start washing, the item must be cleaned of dust and other contaminants. To do this, use a low-power vacuum cleaner or a soft-bristled brush.
Washing fur items together with other items is unacceptable.
If there are minor stains on the fur, do not wash it completely. Limited to local treatment of stains.
Preference is given to hand washing.

It is not recommended to machine wash long faux fur, but the shorter it is, the lower the risk of damage. You should not experiment with fur trim of questionable quality.

If the product has become dusty after winter, then simply knock it out. A bamboo rod is used for this. First, they process the item from the wrong side, and then from the front side.

Then the pile is combed. This will give it freshness after a long stay in the closet.

Let's try to clean it before washing it

Because of such specific consequences of washing, many people wonder whether it is possible to wash fur. The answer is: in fact, this is undesirable. You can resort to washing, but only as a last resort if there is no other way to get rid of the dirt. For example, the fur on the hood of a jacket or down jacket can most likely be cleaned dry. We will discuss these methods in more detail in the “dry cleaning” section.

In addition to dry methods, you can try to spot clean the stains. This is true, for example, for shoulder products like a vest or cape. The dirtiest area in them is the collar, because it is constantly in contact with the open neck.

One method is treatment with a mixture of alcohol and starch. They are mixed until a paste forms (the consistency should be like thick sour cream). After this, the mixture is applied to the stain and left for 15 minutes, after which the residue is removed with a brush. Sticky lint can be fluffed up using a fine-toothed comb. Sometimes kerosene is used instead of alcohol, but it has a specific odor that is then difficult to remove.

If you don’t want to experiment with household products, you can purchase a special stain remover at the store. They are available for different types of fabrics, including fur products. Instructions for use will be written on the bottle.

Washing in an automatic washing machine

Before you start machine washing, the product must be turned inside out . When the fibers are inside, they will not roll or tangle.

If this is not possible, then use a special mesh in which the item is placed before loading it into the drum.

Products with stubborn stains require pre-soaking. The time it is kept in the soap solution should not exceed 15 minutes.

Procedure:

Clean the fur from dust and place it in the drum of the washing machine.
Turn on delicate wash mode. You can wash fur on the “wool” and “silk” programs.
Synthetic pile does not tolerate contact with hot water. Its temperature should not exceed 30 degrees.
Disable spin. The basis of faux fur is knitwear, which does not tolerate twisting.
Wait for the cycle to complete.

It is better to use gels or liquid concentrates as a detergent. They rinse well and effectively remove dirt even in cool water.

Having taken the product out of the machine, you need to remove the water from it with your hands . Not twisting, but gently running your palms over the fur.

While the water continues to drain, it is left suspended over the bathtub or over the basin. After it stops dripping, the item is removed to a dry, well-ventilated room to dry.

Fur should not be washed with powders containing bleaches or enzymes. They also refuse aggressive household products. Using products that contain chlorine, alkalis or acids will damage the product.

This video will show you how to wash faux fur in a washing machine:

Subtleties of choice

When the cold weather comes and you decide to update your wardrobe with another beautiful and warm item made of fake fur, then when choosing it you need to follow certain rules and pay attention to details.

The main quality indicators are:

Smell. An unpleasant chemical “aroma” indicates a violation of production technology.
Compound. The most wear-resistant fiber is polyacrylonitrile. The polyester content also indicates the strength and quality of the product.
Strength. If at the very beginning, even before wearing, lint remains in your hands, know that it will get even worse.
Availability. If the goods are not allowed to be touched, then sellers are not confident in the quality of their goods. A good product will withstand dozens of fittings and remain fluffy.

Love your clothes, take care of them correctly, choose only high-quality products, and then your appearance will be stunning.

How to process manually?

Items with long synthetic pile are recommended to be washed by hand.

The procedure is as follows:

Clean the fur from dust.
Fill a basin with cool water and dilute the detergent in it until completely dissolved.
Soak the fur for 30 minutes. If there is contamination, rub it gently with a brush. The movements should be directed from the lining along the direction of the pile, as if combing it.
Change the water and rinse the product.
Fill the basin with water again and add fabric softener.
It would be good if it contained an antistatic agent. These can be products such as: Lenore for children, Synergetic, Ligva Soft, etc. Their average cost is 150-200 rubles per 1 liter.
Rinse the fur in the prepared solution. This procedure will give it softness and shine, and will get rid of static electricity.

After washing, the product is not wrung out or twisted. The water should drain from it on its own.

If light fur has acquired a yellow or grayish tint, it is recommended to treat it with hydrogen peroxide. Perform the procedure as follows:

dissolve 1 tbsp in 1 liter of water. l. peroxides;
pour the solution into a spray bottle;
lay the fur on a flat surface and spray it completely;
After 10 minutes, the product is washed in the usual way.

Peroxide can be replaced with lemon juice. It is diluted with water in equal proportions, after which the fur is treated according to the indicated scheme.

Light fur

Yellow spots may form on white fur. To get rid of them, you can prepare a stain remover from household products. To do this, mix hydrogen peroxide and water in half and apply it to the fur. Comb it out with a fine comb, then dry it in the bathroom or on the balcony (beware of the sun's rays!).

For light-colored products, vinegar and lemon juice help. They are natural bleaches that remove yellowness and other stains from white fur.

Dry cleaning at home

If you can’t get the product wet, you can clean it dry. Proven home remedies come to the rescue:

starch;
talc;
semolina;
soda.

They are used according to the same scheme:

Spread a clean cloth on the floor or table and place the fur item on it.
Apply the selected product to the contaminated area.
Gently distribute it between the pile and knead the fur with your hands.
Shake the item to remove any remaining powder. You can use a brush, comb or vacuum cleaner with low power.

To get maximum results, the procedure must be repeated several times until the starch or talc becomes completely clean.

To increase cleaning efficiency, cereals or starch can be heated in a dry frying pan or in the microwave .

To clean dark fur, use rye bran or sawdust. Powdered activated carbon removes foreign odors well.

Dry cleaning

The dry cleaning method for pile products involves dry or semi-dry treatment of fur with various substances. These can be ready-made stain removers that are sold in stores. Usually it is written on them what types of fabrics the product is suitable for; a separate type is sold for fur. And also check whether the composition matches the color of the item (it could, for example, be bleaching, you need to keep an eye on this).

An analogue of the purchased product can be prepared at home. For minor stains, dry cleaning is suitable, during which you can slightly refresh the color of the fur and remove the unpleasant odor. For this purpose, bulk products are used, such as:

starch;
sand - please note that it must be cleaned, construction sand will not work;
semolina;
crushed chalk;
salt.

Starch and semolina are used for any type of contamination. Salt helps remove grease stains - its crystals absorb fat. Powdered chalk, in addition to cleaning, allows you to slightly bleach the fur, so it is more rational to use it for light-colored products. Sand, on the contrary, is better used for colored fur, because it may not be clean enough and make white fur yellowish.

If you are unsure that the composition of the home remedy will suit the fur structure of your product, then it is better not to risk it. It would be best to give the item to specialists so that they can clean it. Special establishments have equipment and proven substances that will help the product regain the appearance it had after purchase.

Housewives, after washing their fur coats at home, leave reviews on how they did it. This is real, but deep cleaning, the same as that carried out in specialized institutions, is difficult to do.

Drying rules

After washing, the fur product must be properly dried so that it does not lose its characteristics:

Shake the product to remove any remaining water.
Do not twist or squeeze the item. You can wrap it in a terry towel so that the water is absorbed faster.
Do not place the product on a radiator or hang it in the sun. Because of this, the fur is deformed.
During drying, the pile should lie flat, without creases, with the fluffy side up. You can hang the item on hangers without using clothespins.
You cannot dry your fur with a hairdryer.

Optimal conditions are drying in the fresh air, but in the shade, or in a warm room with good ventilation and low humidity.

An important nuance: faux fur, unlike natural fur, does not have a specified direction of the pile. Therefore, immediately after washing, smooth it with your palms in the right direction.

Thanks to this simple manipulation, the villi will not bristle when they dry.

Precautionary measures

If the chosen cleaning product is toxic, protect the skin of your hands, eyes, and respiratory organs from their negative effects using personal protective equipment. Work with windows open.

Even if you choose a simple and recommended cleaning product, be sure to test it on a small, inconspicuous area of the fur item before you begin a full-scale treatment.

Dry your faux fur coat after water cleaning and washing in a well-ventilated area.

When cleaning with gasoline or kerosene, beware of open flame.

That's all we wanted to tell you about cleaning faux fur. We hope that the publication was useful to you.

Useful tips

Information that a person who decides to wash a faux fur product should have:

If it is possible to refuse washing, then it should be used. Excessive contact of the product with water will deteriorate its appearance.
To make the pile smooth, use fabric conditioner.
When the fur is dry, it needs to be combed. The comb is used with a wide distance between the teeth. You can also use a massage brush. There is no need to push the comb too far into the pile so as not to catch the fabric base.
If you need to wash a hood or collar with fur, it is better to unfasten it from the main product.
White fluff is handled with care. Stain removers are not used to eliminate yellowness and grayness.
The matted pile is sprayed with warm water, allowed to dry, and then combed. You can carefully walk the steamer over the product without pressing the device too tightly against the fabric.

Before using any chemicals that have not previously been used on fur, a test is carried out.

The product is applied to an inconspicuous area and the reaction of the fiber is monitored. If no pathological changes occur, treatment can be continued.

Material advantages

The main advantage of faux fur is the fact that no animals were harmed in its production. By choosing such material, you save lives, because many fur-bearing animals are on the verge of extinction. Also, faux fur is more durable, wear-resistant and practical. Caring for it is not difficult. Faux fur is not afraid of moths and other pests. It is frost-resistant and available for purchase at a reasonable price.