How to fix jeans frayed between the legs: what to do and how to repair the hole yourself

A patch is a piece of material that is fixed to the product to hide tears in a separate section of it. The term comes from the verb “patching” - that is, “sew up”, “darn”. A patch of base fabric or a more durable material covers damage that cannot be repaired by simple darning.

bluemaize.net

What you need for work

For hand sewing you need the following materials and tools:

• patch fabric;
• threads;
• needles.

Seamstresses advise working with household needles, which are sold in a set. To sew up a hole without a sewing machine, use numbers 11 and 14. The threads are also chosen thicker.

Cotton threads from 50 to 80 numbers or from 50 to 60 numbers (synthetics) are suitable. You can also use a sewing machine to repair a hole in your pants.

General recommendations

Clothes are darned so that it looks neat and unnoticeable. Large holes are patched, and light abrasions are corrected using the plastering method. But not everyone knows how to do it correctly.

It is recommended to remove protruding threads, as they will spoil the appearance of the stitching on the fabric. The darning is done from the wrong side so that each seam looks beautiful. When the material is stitched, it is ironed.

Tools for work

To sew up a hole in jeans between the legs or anywhere else, you need to prepare several tools and materials. To work you will need:

• strong threads;
• a piece of chalk;
• pen, piece of paper;
• iron equipped with a steam generator;
• durable needle;
• scissors;
• a piece of soft material (if a patch will be sewn on).

If there is denim of the same color as the damaged item, it is better to take it. It is also advisable to select threads of the same color, otherwise the sewn area will stand out against the background of the rest of the fabric.

Recommendations on how to sew jeans between your legs discreetly

Even thick denim pants can rip in the most inopportune places. And if holes in the knees look familiar, then things worn between the legs are usually either thrown away or mended. Matter often becomes thinner due to its dilapidation: sooner or later abrasions will appear on it.

How to sew up a hole in jeans? Craftswomen do not advise getting rid of them, because you can repair a hole in just half an hour. The publication contains tips on how to sew jeans between your legs unnoticed, both by machine and by hand.

Types of holes on jeans

Jeans, which were originally workers' clothing, began to be worn by people all over the world due to their qualities. They are constantly added to collections by some of the most popular fashion designers. Denim has almost completely replaced any other materials for sewing pants. Even old denim is strong and wear-resistant, but this does not always protect against damage in the form of holes and seams coming apart in certain places. Most often this happens:

• On your knees;
• Between the legs;
• On and in your pocket;
• On the butt.

Small hole in pocket
Important! Jeans are demi-season clothing and from constant wear, regardless of their quality, they can tear and wear out in certain places where friction most often occurs. And it most often occurs on the inner thighs, on the knees and at the very bottom along the hem.

Pants worn between legs

Features of repair of various types of pants

Classic pants

In suit trousers, you should sew up a rip only if it is not visible. If the sewn place is visible to others, this will clearly damage the business reputation of their owner.

Seam divergence is very easy to fix. To do this, use a machine or a needle if the hole is small, using threads to match the fabric on the wrong side. It is better to sew up a small hole in an inconspicuous place with a needle. It is necessary to ensure that the sewn area does not gather: do not tighten the thread, straighten the fabric in the process.

You can significantly extend the service life of trousers:

• first of all, you need to monitor the serviceability of the braid, which, as a rule, is trimmed from the inside of the bottom of the trousers;
• as soon as the braid begins to fray, it must be replaced with a new one so that “fringe” does not appear on the trousers;
• The braid must be sewn so that its thick edge protrudes 1 mm from under the trouser cuff.

So-called cuffs are often made on trousers. If they are frayed, you need to completely tear them apart, clean them with a damp stiff brush, iron them through a wet cloth and plaster them (see the “Plastering” tip). The width of the cuff is usually 5 - 6 cm. When sewing, it will decrease slightly. Accordingly, the trousers themselves will become somewhat shorter. Therefore, the new line of the cuff should be 1 - 2 mm higher than the previous one, then it will cover the place of the piece.

To prevent trousers from stretching at the knees, it is recommended to sew twill, silk, half-silk or other slip fabric from the inside. Thanks to this, the trousers stretch much less at the bends of the knees and retain the fold much longer.

Jeans

These are the most popular pants of all time. Jeans are worn by adults and children, men and women, old people and youth. Modern fashion allows you to leave a hole or abrasion on your jeans unchanged. Contrasting or matching patches look great on such clothes. This gives the clothes individuality. Still, there are such damages that the jeans will have to be sewn up.

1. From a piece of denim fabric of similar color, cut out a square, the size of which is 2 cm larger than the hole. If the fabric around the hole has become too weak (rotten), we put a larger patch.
2. We select threads to match the denim fabric. This stage is the most important. It depends on him whether the darning will be visible. When going to the store for threads, do not forget to take with you the jeans that need to be hemmed. After all, there are countless shades of denim (denim).
3. From the wrong side, we place the cut flap on the hole, secure it with pins and sew around the perimeter with a basting stitch. When the patch is securely fixed, remove the pins.
4. Place the jeans under the paw with the hole facing up. You need to darn jeans by running stitches on the machine from one edge of the basting seam to the other and back. To perform a reverse stitch, you do not need to turn the jeans over under the presser foot; just use the reverse stitch. We pull the fabric to the side when sewing so that the stitch does not lie on the stitch, but goes in a zigzag.
5. Remove the fringe from the surface of the hole.

The trousers are sewn. Now the old hole is invisible. Holes on the knees can also be darned in a similar way, and fabric can be placed in a contrasting or patterned one.

Jeans often fray between the legs. It’s impossible to beat this - you need to fix it, because soon a hole will form there. You need to take a cotton piece of fabric the width of the abrasion. Attach it from the wrong side and darn with suitable threads, which will be invisible from the front side. Thus, the life of the trousers is extended and holes are prevented.

A large hole with jagged edges is best repaired with a patch. The patch is chosen from the same material, but companion fabric can also be used. The patch can be attached in two ways:

• on the front side - the edges of the patch are folded, sewn over the hole, then stitched with decorative stitching (optional);
• from the wrong side - the patch is attached from the wrong side, leaving the hole open, then the edges are fluffed up (this technique looks impressive on denim clothes).

Repairing jeans may sometimes simply be beyond your ability if, for example, you don’t have a good sewing machine or don’t have enough experience. And after an unsuccessful attempt to sew up your jeans, you will throw them into the back drawer of the closet, or even throw them away altogether. However, any jeans can easily be turned into shorts. It’s enough just to cut the legs evenly and correctly with scissors and pull out a few transverse threads along the edges to get these original denim shorts. Buy about a hundred of these metal jewelry and “breathe” new life into your old, torn jeans.

Not only shorts can be made from jeans. You can make a very original bag from old jeans. Denim pieces can be used to combine with other fabrics such as leather. Eventually, the remaining pieces of jeans without holes can be used to repair other jeans.

Children's trousers

Holes can appear in children's trousers at unexpected times. All of the above methods are suitable for repair. In addition, you can now purchase adhesive-based patches of various sizes in craft stores. They are easily and quickly attached to the fabric using an iron. Withstands numerous washes. In addition, they depict various children's drawings, cartoon characters, and funny inscriptions.

On the front side you can select and sew a piece of fabric with a picture, applique or emblem:

1. Place the pants on the work table with the hole facing up. From the lining fabric, cut out a rectangle approximately 1-3 cm larger than the hole.
2. We apply the material from the wrong side and collect the torn edges, securing them with needles. It is better to carefully mend the tear from the front side.
3. Now attach the emblem of your choice with needles to the front part (so that it does not move) and sew it along the edge.

The most interesting holes will be those resulting from accidental “trauma” - with torn edges and even torn out pieces of material. This is a great opportunity to show your imagination and update them. You can make patches in these places using the method described above from a similar or, conversely, contrasting fabric. Some applique made from multi-colored pieces of fabric will look even more fun and interesting.

How to sew knitted pants

The industry has given us such an amazing fabric as knitwear. Knitted items have settled firmly and for a long time in closets. After all, they are comfortable and pleasant to wear. Almost everyone has a pair of knit sweatpants that sometimes need mending.

When sewing holes on such a product, it is important to follow each eyelet along the edges of the hole. It is necessary to pick up each one with a needle and tighten it with thread. If you miss at least one, it will subsequently form arrows. This spoils the appearance of the item and makes it unwearable.

When repairing knitted trousers, it is appropriate to use any fabric adhesive. For example, non-woven fabric or dublerin. Turn the pants inside out, align the edges of the hole evenly, cut out a piece of glue (slightly larger than the hole) and go over it with a hot iron.

Remedies

If your jeans are leaking between your legs, you need to mend this area as discreetly as possible. However, not every housewife knows how to make a patch. The best method for fixing a large hole is undoubtedly a patch, while minor abrasions can be corrected with gizmo. However, before you start repairing things manually, it is recommended to select the right equipment:

• Needles should be chosen from household needles. They are usually sold as a set. From the thinnest ones, which can break under the density of the material, to huge thick needles, which are also not suitable due to the structure of the fabric. Denim darning is carried out using numbers 11 (75 or) 14 (90);
• threads should also be selected according to thickness. So, to make a patch on jeans between the legs, cotton threads No. 50-80 or synthetic threads No. 50-60 are recommended.

In addition, it is important to take into account color nuances when selecting threads and material for a patch. Threads and fabric should definitely be chosen to match the tone of the torn item. It may seem that black threads will be invisible against a dark blue background, but this is not the case. Any deviation from the basic range is immediately noticeable.

Fixing a problem between the legs on children's jeans is much easier. You can resort to the decorating method and hide the hole using an adhesive sticker and an iron. It is possible to select a series of cartoon stickers and decorate entire trousers with them. This will add naturalness and make the thing very stylish.

patch

How to sew jeans between your legs unnoticed? To properly and discreetly repair frayed jeans, it is recommended that you first prepare the damaged fabric. It is necessary to get rid of the “fringe” and shape the hole. The shape should match the contours of the patch, but be smaller. Next, select the fabric and threads by color. No need to adjust the desired color using a felt-tip pen or paint. The shade will come off after the first wash, and it will be difficult to tint again.

If jeans are worn more often than usual, the material should not be thicker than the original, and the seams should be made as minimally rough as possible. Otherwise, when moving, the thing will become unusable again. In expensive models, a small piece of material is attached to the product as a wash sample. If necessary, it is perfect for patching. You can also take the fabric from the front side of the jeans, replacing the missing piece with a bright, fashionable insert.

Next, you need to fasten the patch to the jeans with special sewing pins so that there is no shifting and the patch lies flat. It is recommended to apply a piece of fabric from the inside, just as the outer edges of the jeans should be folded inward. Then you should thread the contrasting thread into a suitable needle, tie a knot at the end and walk along the patch with a basting stitch.

The length of the thread should correspond to the size of the damaged area of ​​​​the fabric. Excessively long thread is difficult to handle. The short one will have to be connected to an additional segment. To measure the required length, you can place the thread along the trajectory of the intended seam and add an additional 10 cm (knot and remainder for fastening).

After the patch is securely fastened, you need to get rid of the pins and sew the fabrics together with a control stitch using a thread that matches the color of the materials. The seam should follow the shape of the patch, going around it. The thread needs to be secured at the end, but do not tighten the end too much. This creates an untidy crease that is difficult to get rid of. Then you need to pull out the contrasting thread, iron the darned area with an iron and that’s it. The patch is ready!

Plastering

Plastering is the restoration of the fabric structure using stitches from a sewing machine. The result obtained depends entirely on the correctly selected threads. This method involves applying a patch only from the inside and gradually tightening the tissue. This way, only the threads will remain “in sight”. This method is most convenient for minor tissue damage. The only thing that can cause difficulty is the lack of a backstitch function on the sewing machine.

Before you begin machine operations, you need to prepare the washed jeans by hand. Use threads of a suitable color to pull together the two halves of the trousers. The ties should be long and frequent, but not constricting the material. Otherwise, creases will form, which will form unsightly folds on the product.

Next, you should choose a suitable fabric, preferably close in color to the product (in case of repeated rupture). It is advisable to choose a flap that is soft and does not cause irritation when walking. An excellent option would be duplerin and non-woven fabric, however, such material is not found in every home, so you can limit yourself to any. The length of the segment should be 1-3 cm longer than the gap.

Then you need to attach the patch to the product from the wrong side. You can fasten with sewing pins, preferring needles with bows at the end, not with beads. If they are missing, you can secure them with overcasting with a brighter thread. The main thing is that the patch should lie flat, completely adjacent to the jeans.

When the preparatory work is completed, it is time to begin the actual installation. A zigzag stitch is sewn from one edge. The seam should be very frequent, the ties should be as close to each other as possible.

When you reach the end, you need to unroll the jeans (if there is no reverse function) and walk again until the hole completely disappears. If there is a reverse option, the procedure is greatly simplified: having reached the end, you only need to set the mode. Next, it is recommended to trim off the excess shreds and secure the thread firmly. Iron the seam additionally and enjoy your work.

Be careful when working with a sewing machine. You can inadvertently sew on something extra: a pocket, a pant leg or other parts. This is unlikely to damage the product, but it will take a long time to rip out the machine seam.

Methods for repairing trousers between the legs

So, how do you fix pants that are frayed between your legs? There are two main ways to restore your pants to their original appearance. Each of them is described in detail below.

Mend pants by hand

This method is suitable for small abrasions on denim. This will require threads similar in thickness to the fibers of denim material. Also, the threads must be the same color and shade, otherwise the place in which they are sewn will be obvious.

Secure the seam to an undamaged area of ​​the fabric and use small stitches to pass the thread over the worn area. Then the fabric will not warp. After this, make stitches across, passing the needle between the threads. It should look like weaving new fabric to replace worn-out fabric. The better the threads are selected and the tighter the seam, the less noticeable and durable the result will be.

How to make a patch on pants between the legs?

Repairing trousers using a patch, which is placed on the wrong side, is called “stuffing”. This will require a special patch fabric. It comes in two types: one can be ironed to the trousers, the other will have to be sewn on by hand. If the hole in the pants is small, then any color material will do. Otherwise, you will have to choose a color to match the trousers. You will also need, as in the previous case, plain threads.

Step-by-step instructions for installing the patch:

1. Start by turning your jeans inside out and looking for a rip or hole.
2. Cut a piece of patch material so that it is slightly larger than the worn area.
3. If the fabric is pressed with an iron, then, having set the required temperature and turned on the steam treatment, carefully place the patch from the inside of the trousers. Attention! After gluing the patch, there should be no folds in this place. To do this, pre-wash your trousers and mend them while they are slightly damp.
4. If we are talking about a small hole in jeans, then on the front side, over the patch, you can darn it with plain threads (as in the first method). In this case, the patch will help the seam last much longer.
5. For repairing pants made from another type of fabric, darning will not help. The inconspicuousness of the patch will be affected only by the correctly selected shade of material and thread.

Instructions for proper stitching

If a person has never darned holes in his pants, then it would be ideal to read the instructions on this matter. One of them will be presented below. Having completed all these points, you can easily learn how to sew up a hole in your pants unnoticed. Actually instructions:

1. Choose threads whose color should be invisible against the background color of the fabric. You should also choose the right and thick needle. Thin and small needles are not suitable for denim;
2. Thread a thread through a needle and tie a knot at its end, or better yet several knots in one place;
3. Sew the hole from the wrong side, tightening the thread as tightly as possible. You need to sew close to the edge of the seams of the holes;
4. During the darning process, you should constantly look at the front side of the fabric so that the seam is smooth and beautiful;
5. Make a few additional knots so that the seam does not come undone when worn, and cut off the rest of the thread.

   
   Darning technique

We sew by hand

If the hole turns out to be a straight or angular cut, then you can simply and efficiently darn on a sewing machine, for example, the popular Janome. To start the process, you need to choose the color and shade of thread that is suitable for darning jeans. Next, you need to make several stitches, which should be the same in size, as well as the tension of the individual threads. If these rules are not followed, the torn hole will look worse than before repair. It turns out that sewing up a hole in jeans without being noticed is quite simple.

Torn knees with torn edges

Important! If we are talking about repairing children's or women's clothes, then you can apply appliqués, patches on top, or decorate the repair as an element of clothing design.

Applique on pocket

How to sew without a machine

The easiest way to sew up any type of hole in jeans without using a sewing machine is to simply darn or apply a patch. You can create decor around and on the hole not only with the help of various denim and non-denim fabrics and buttons, but also with other accessories and ribbon. It is better not to repair children's and thin pants in this way, since the hole may tear even more, but use hand sewing on a piece of other denim. In general, the same instructions described above will work for mending a hole.

Hand stitching technique

A few more tricks

This method is easier and faster, but if the work is not done carefully, the patch will be very noticeable. In addition, there is one thing: the repair site will be quite tough. But if this doesn’t bother you, then for the patch you will need a piece of denim larger than the hole in size, and a web of adhesive tape.

· cut out the patch

apply it to the damaged area;

· fold the edges

, iron them so that the fabric does not come out;

· Carefully place a cobweb under each side of the fold of the patch.

It should not peek out from under the patch so as not to stick to the hot sole of the iron;

· carefully, slowly, iron all sides

one by one: the patch is glued to the fabric.

One side of the patch should run along the middle seam and coincide with it, so the work will look neat.

In a similar way, the patch can be applied from the inside, along the wrong side. But the seal between the legs will rub and interfere, especially for men; on thin, worn fabric it will be noticeable and uncomfortable.

It is for this reason that it is advisable to repair jeans from the front surface.

From experience, we can say that repairing jeans between the legs is a half-measure that will delay parting with them for some time. But as soon as it’s time for repairs, it’s worth looking for a new pair, no matter how comfortable the old one is.

Repairing frayed jeans

In order to avoid having to sew up holes in your favorite trousers, you should treat the item with care and care for it appropriately from the first day of purchase. But let's consider a situation where the jeans are already worn out.

For example, on jeans between the legs not only abrasions have appeared, but the seam itself is starting to unravel. To prevent tearing of the fabric, follow these steps: We focus on strengthening the seam, otherwise the trousers may crack at the most inopportune moment. You can reinforce the seam not only using a machine, but also manually using the blind stitch technique. To do this, specialized sewing stores sell super-strong threads for working with denim materials. They have a color that matches the classic stitching on jeans.

• Then you should mend the worn areas of the trousers. For this purpose, choose threads that match the thickness of the denim as well as its shade. After laying out the denim, secure the stitches to the still strong areas of the fabric and make horizontal movements with the stitches over the worn part of the trousers. Insert the needle into the torn edge and use a vertical stitch to go back. These manipulations are necessary to ensure that the fabric does not tighten or warp.
• After completing the horizontal row, start the vertical row so that the needle passes between the threads. In fact, it turns out that you are weaving new fabric to replace the leaky one.

How to make a patch between your legs

This method is used for a relatively small area of ​​abrasion, that is, when there is no obvious hole yet, but abrasion is already noticeable. To prevent the situation from getting worse over time, you should immediately strengthen the denim fabric. For these purposes, you will need patches made of denim material, specialized fabric glue or self-adhesive tape , popularly called “spider web”.

Apply thermal tape to the worn jeans fabric, covering it with a denim patch on top. The durability of this repair depends on the quality of the “web”. Also, do not forget that the more often you wash your jeans, the less the patch will last. However, if you stitch around its perimeter, it will last much longer.

If time permits, try looking in specialized sewing stores for ready-made denim patches, the other side of which is made of self-adhesive tape. This type of repair is performed using an iron. However, if the hole is large enough, the wearing process after this type of repair will become completely uncomfortable. Since the fabric becomes significantly denser, and therefore wrinkles worse, this area will be quite rough, which will cause discomfort during wear.

Do it yourself or manually

to mend jeans :

• mend jeans between the legs using a machine;
• seek help from a workshop so that a specialist can properly patch the hole;
• sew it up yourself on the knee, holding it with your elbows, which is the cheapest method, but at the same time quite painstaking.

Blind stitch patch by hand

If the hole has formed on the knee, and it is large enough, during the repair process you should follow the step-by-step instructions below:

Trim the threads sticking out around the perimeter without going into the fabric.

1. Turn the jeans inside out and circle the hole, making an indentation from the edge of about 2-3 cm. If possible, it is better to process the edges of the hole not with your hands, but with an overlocker. But in this case the patch will be more noticeable.
2. Prepare the self-adhesive tape by cutting it to the desired size. Do the same with a piece of fabric for sealing your pants. Ideally, you should cut it diagonally in the direction of the weave of the thread. Thanks to this, the fabric will not unravel or fray.
3. Glue the web and denim patch using a heated iron. Steam the patch a little, especially around the edges.
4. Sew around the perimeter of the pants patch using blind stitches.
5. Turn the jeans right side out and make the correct horizontal stitches. The most suitable stitch for this would be a zigzag stitch.
6. Cut off the excess threads and the repair is complete.

How to sew jeans between your legs discreetly by hand

Jeans are a special type of clothing; they are comfortable, versatile, and grow in like a second skin.

No matter how much ill-wishers repeat that jeans are the work clothes of American farmers, you and I know that modern fashion has stepped in the denim direction far ahead of ostrich ranches.

But what if your jeans are torn between your legs due to constant wear?

Even having a sewing machine is not an indicator of the ability to fully use it. It just seems like using it to sew up jeans, especially between the legs, is a piece of cake. If you have no experience (or don’t have a sewing machine), but there is a hole, you will have to do the repair manually.

1. First things first

you need to choose the appropriate threads. If you look closely, you can see with the naked eye that the hole is the result of severe wear; between the legs and on the butt the jeans are much lighter than in other places. So, it will be a mistake to take threads in that wiped area. The color of the threads should match the dark areas of the fabric.

2. If the hole is not completely torn out

and is more likely to be abrasion, then all excess threads must be mercilessly removed. They will not help to facilitate the repair, but will come out and spoil the smooth seam.

3. You need to darn jeans from the inside out

. This way the seams will be neater, and the threads on the light side (and the back side is usually lighter than the front side) will be more noticeable. And in general, all rough work is done from the inside out.

4. First you need to sweep the hole

wide stitches, pull the edges together for further work. They should be approximately the same length. You should not try to sew along the very edge: the fabric in the place of wear is thin and will come apart in a new way.

5. For internal patch

many sources recommend taking a piece of denim. This should not be done, because the repaired area will become very dense and hard, and will interfere and rub the skin.

Moreover, the skin of the inner thighs is quite delicate. It is better to take adhesive fabric - non-woven fabric or dublerin. They are much easier to attach to the main fabric and do not cause discomfort when worn.

In cases where dublerin is used for stretch fabrics, for example, jeans made of stretch fabric, you need to select a patch so that the stretching directions of the threads coincide.

6. You need to cut a patch from dublerin or non-woven fabric,

matching in size to the area of ​​wear. It is a mistake to think that the size of the patch should be the same as a hole in jeans, because a new one will appear around it; the fabric in this place has completely thinned out.

7. Attach the patch to the wrong side

jeans and iron thoroughly with a hot iron. The adhesive base of the fabric will fix the patch on the jeans firmly enough so that they can be safely used (washed, worn). You need to iron dublerin through gauze or cotton cloth; if it gets on the sole of the iron, it will be quite problematic to clean it off.

8. After the base fabric is fixed

from the inside out, the jeans need to be turned inside out. The rest of the work will be done from the front side. A thread matching the color of the strong fabric is threaded into the needle.

9. You need to make a strong multi-layer seam in place of the hole.

Therefore, having secured the knot in a dense area, you need to methodically connect the edges with stitches. The stitches should lie as close to each other as possible. After the first row of stitches is completed, you need to put the second and third on top of it, firmly connecting the edges of the gap.

10. After finishing work, the jeans are ironed

. They are ready to wear again.

How to install a patch

There are two ways to mend jeans between your legs using a machine.

Classic version

It is easy to close a hole or abrasion by making a regular fabric patch over the damage. The square patch is quick and easy to sew on, which is why it is the most popular.

To make a square patch, you need to cut out a square from the fabric that will cover the hole, leaving 0.5-1 cm for the hem. Then the part should be ironed, bending the edges and secured to the jeans. Experienced craftswomen can use pins for this.

For those who are not confident in using a sewing machine, it is better to baste the patch by hand. Next, the square must be sewn to the jeans, placing the seams around the perimeter of the workpiece.

This method can be difficult if the hole is in a hard-to-reach place. In this case, you can simplify the work if you slightly open the nearest factory seam. After the hole is sewn up, all that remains is to carefully stitch the seam, choosing threads of the desired color.

Recovery

It is possible to mend jeans between the legs using a machine even when the damage is large and the patch option is no longer suitable. To do this, you should use the restoration method, which consists of completely replacing the damaged part of the product. In this case, the replacement should be made symmetrically.

To work you will need:

• pieces of denim of a suitable color,
• threads of 2 colors: to match the jeans and matching the threads used to make the seams on the jeans by the manufacturer.

Stages of work:

1. It is necessary to rip out part of the back seam running in the center, as well as the side seams.
2. Cut out the frayed section of the pants.
3. Next, on the other side of the back seam, cut a piece of fabric identical in shape.
4. The cut piece of jeans should be attached to the prepared flaps and symmetrical parts should be cut out.
5. Then all the details need to be basted and carefully sewn into the jeans.

To prevent the jeans at the crotch from fraying longer, it is recommended to cut the insert parts so that the guide threads run diagonally. This will allow the fabric to stretch better.

You can also strengthen your jeans if you use thick corduroy or leather rather than denim. To make the insert look natural, you can sew patches from the same fabric in other places on the jeans.

Repair without patches

How to sew up a hole in jeans beautifully? There are several ways for which you do not need to make patches. They are simple to perform, and if you learn how to do it, you can quickly and easily restore worn-out material.

Darning by hand

How to mend a hole in jeans? With this method of repairing things, frayed threads are replaced with new ones. To do this, darn along the worn area.

If there are factory threads left on the fabric, then pass the needle first under and then over them.

When the row ends, a needle is threaded from the end through several threads on a whole piece of material. At the same time, the gaps from the edges of the torn material should remain minimal, but should fix the fabric well. This way, the darned area will be less noticeable, and the denim will stop unraveling.

Usually craftsmen do a continuous stitch: this way the darning will be dense and more durable. Then they continue to mend the hole, but not along, but across. First, the needle is passed under the thread, which is located perpendicularly, then over all the following ones. The seamstresses make sure that the stitching is tight and there are no gaps. If this condition is met, and the color is matched tone to tone, then the repair will be barely noticeable.

How to mend jeans between the legs by hand instead of using a machine? To accurately repair jeans, each thread must be suitable in density, texture and shade. It is best to take them from the bottom of the trouser legs that need to be sealed. This method is suitable for restoring worn-out, sometimes see-through clothing. Often such areas appear if denim wears out over time. Craftswomen easily mend small holes with torn edges.

Plastering

This method is used if jeans need to be closed by hand unnoticed. Seamstresses use it when sewing the edges of fabric. This is usually used to repair clothing that has been cut or torn by a sharp object.

Craftsmen know how to sew up a hole without a sewing machine. Such a hole can be round in shape. The plastering method is used most often.

There are several ways to repair various types of damage:

• vertical stitches;
• horizontal stitches;
• diagonal stitch;
• dense seams on top of the edges sewn together.

Blind seam

Jeans can be hand-stitched discreetly. Craftswomen advise using a hidden seam for this. This method is suitable in cases where the trouser legs are torn at the stitching site.

For example, they can disperse from behind or from the side. It happens that some parts have come off: patch pockets or a belt loop.

If apart from this there are no other defects, and the trouser legs remain intact and not frayed, then two or three hidden seams on the fabric completely eliminate the damage and remain invisible. This technique is also used if you need to hem the trouser legs at the bottom. Such repairs may be necessary when restoring worn edges, fixing the hem from the inside, or stitching the bottom part.

What else can you use to glue a patch to jeans?

glued bright patch on children's jeans
In addition to the web, you can glue a patch to jeans:

• with a glue gun, if you work with it pointwise,
• special glue for attaching rhinestones and stones,
• silicone and rubber adhesives,
• special adhesive liquids intended for textile surfaces. They are offered by shops with sewing accessories,
• shoe glue, which is used to hold the sole in place,
• furniture adhesives used to join fabric parts.

However, we note that after repairing with glue, your jeans will be susceptible to frequent washing. And in some cases, the glued patches may be rejected along with a piece of jeans. This happens due to the rigidity of the tissue that appears at the gluing site.

How to beautifully design patches on jeans?

cute owl patch on kids jeans

Original ways to design patches on jeans will breathe new life into them. Use the following:

• ready-made appliqués, which are sold in specialized stores with sewing accessories,
• scraps of fabric and leather with printed logos, which you will find in the same stores,
• independently created versions of patches made of felt, beads, sequins, lace, thin bright fabrics with prints.

The first two options have the advantage of being easily glued to jeans using an iron.

However, the last option is good for the creative moment. You create an original version of the patch with your own hands, which you then sew on.

How to sew decorative patches?

You can fill a hole in jeans in an original way using decorated material that you buy or make yourself.

For stronger repairs, an additional “cobweb” – adhesive tape – is used. When in contact with a heated iron, it bonds the clothing and the patch.

Repairs are also possible only with a needle and thread. The main thing is to sew the decor evenly and neatly.

Thermal patches

Fixing a hole with a thermal patch is a quick and high-quality repair method. To implement this, it is recommended to cut the patch slightly larger than the problem area.

The prepared flap is glued directly to the defect site. To do this you will need a heated iron. They are carefully passed along the entire perimeter of the patch until it is firmly and immovably fastened.

To ensure long-term use of repaired clothing, it is worth additionally sewing a machine or hand seam in the area of ​​the defect.

Lace patches

Lace patches will help make your look soft and feminine. You can buy them in a store or remove them from old unwanted clothes.

First, the area around the resulting hole is prepared. Then the patch is sewn or glued. If desired, it can be further decorated.

There are many options to preserve the appearance of your favorite clothes. The choice of method depends on the image, age and gender of the owner of the item.



Why are they wiped?

Jeans is a high-strength fabric, but a number of reasons provoke rapid abrasion of the threads. This problem is more typical for natural denim without synthetic impurities.

Features of the figure

Features of the body structure lead to increased tissue friction:

• close placement of the hips;
• excessive muscle development in athletes.

In some people, the thighs are in close contact and constantly rub when walking, leading to thinning of the material.

Gait features

The way your legs are positioned when walking contributes to the wear of denim - the fabric wears out equally for those who mince with small steps and waddle.

Material quality

The lightest and thickest denim fabric wears out. Thick denim rubs more slowly, but creases in the wrong size cause wear. The presence of synthetics protects the material well - the presence of elastane or polyester increases the wear resistance of jeans.

Restlessness

Jeans rub not only when walking - for those who like to fidget in their chairs, the wear process is ongoing.

Overweight

Those who are overweight most often suffer from holes between their thighs, especially if they are constantly growing. The seams stretch, the fabric is constantly under stress not only from friction, but also from tension.

How to prevent the problem

For those who constantly have to deal with jeans that are worn out between their legs, it is useful to remember a few simple rules for preventing the problem.

Choosing the right size

Choosing the right size is the first step in increasing the durability of your jeans. To prevent jeans from fraying, you should not buy tight products. Excessive tension of the fabric, if you want to fit into a smaller size than necessary, provokes wear. With a large size, the folds from excess material rub against each other.

Normal or high fit

Models with a high or normal fit fit the body better, sit naturally, and form fewer creases in the groin area. Experience shows that with a low waist, jeans rub faster.

Train yourself not to fidget in your chair

Fidgets will have to learn to control erratic movements during long periods of sitting. When turning in a chair, you should sit up to reduce friction and simply not make unnecessary movements.

Proper washing

Jeans should be washed in the recommended washing machine mode, without exceeding the temperature, without excess detergents and chemical stain removers, with the zippers turned inside out and zipped up. Do not fill the drum with several products at once - they will damage each other.

If your jeans are already torn, it is better to wash them in a special bag.

Timely removal of pellets

To prevent the thinned fabric from tearing when clumps of matted threads are accidentally torn off, the spools are removed with a special machine or a sharp blade.

Ways to avoid scuffs

In order not to bother with patches and repairs of your favorite jeans, you should follow some wearing and washing rules.

Keep in mind that when buying jeans that are too tight for you, or, conversely, are too loose, be prepared that in the future this will lead to holes that will have to be sealed. Low-waist styles also tend to fray on the inner thigh. In order to avoid troubles, you should buy jeans strictly according to your size, without making allowances for the fact that the fabric will stretch during wear and the jeans will fit more comfortably. As practice shows, not every jeans stretches to the desired size. Well, just in case, inspect the jeans for manufacturing defects.

Gentle wash

It is very important to read the label, which contains recommendations for caring for a particular item of clothing, but if you are not in the habit of doing so, accept the fact that absolutely all jeans will sooner or later receive damage that is difficult to repair - on the inside of the thigh .

Jeans should be turned inside out before washing. It is best to wash them separately or with other pairs of jeans. Don't wash them . But infrequent cleaning also has a bad effect on the condition of the fabric, since small particles of dirt become fine abrasives, which fray the contacting parts of the trousers while walking.

If you wash your jeans in cool water on a gentle cycle without using bleach, they will last for several years.

Tumble drying also causes damage to denim. In order to minimize the harm from machine washing, jeans should be dried naturally by hanging them on the dryer. These tips will help you extend the life of your favorite item. If your jeans have abrasions, you already know how to deal with it. However, the time will come when you still have to buy new ones, despite all the efforts made.

In Holland, a man, an avid denim lover, wore his favorite jeans for more than 7 years, while repairing them almost daily. After they fell into complete disrepair, several fashion magazines became interested in the situation and raffled them off in a competition at a popular clothing store.

What to do if your pants rub between your legs?

So, having understood the causes of abrasions between the legs and how to eliminate them, it is also necessary to mention how to avoid them. A few simple recommendations will help with this.

Always choose clothing that fits properly. Don't expect the trousers to stretch or shrink over time after several washes. Tight pants may not be able to withstand tension and wear out quickly, and pants that are a size larger will constantly rub against each other between the legs, which will also lead to early wear.

What to do to avoid or reduce this effect:

• Choose more wear-resistant materials for trousers;
• Order more than one pair of trousers for one suit;
• Wear boxers underwear;
• Choose trousers with a looser fit;
• Give your trousers a rest, wear them no more than once every two days;
• Choose trousers with a lei.

Another reason is the peculiarity of gait. If the volume of the hips is small, but the legs still rub against each other when walking, then the crotch seam of the trousers will wear out quite quickly and the trousers will have to be repaired. To avoid rubbing, you must constantly monitor your gait. Over time, this will become a habit and will no longer cause discomfort.

If you have a sedentary job or lifestyle, try to fidget less in your chair. To change your body position, rise slightly from your chair. This will help reduce the intensity of friction.

When choosing jeans, try not to buy low-waisted models. As a rule, when worn on such models, folds form between the legs, which can lead to unnecessary holes. Buy jeans with a normal or slightly high rise.

Don't wash your pants too often, as this will significantly shorten their lifespan. When washing, try to use as little household chemicals as possible (rinse aids, stain removers, conditioners). It would be preferable to wash by hand, treating stains with laundry soap and water. You can also use the delicate cycle in your washing machine.

Watch the thickness of the fabric on your pants between your legs. If it has become too thin, then wiping will soon be inevitable. In this case, you can strengthen the weak areas yourself with the help of linings or contact a studio for this task. In any case, it’s better than putting a patch on worn-out pants later.

You shouldn't wear the same pants all the time. Buy two or three pairs and change your jeans every few days. Then the problem of rubbing will bother you much less often.

It is necessary to understand that any hole or abrasion can be eliminated on your own. If your pants are completely worn out, it may be time to buy a new pair and turn your old pants into shorts or use them during car repairs or construction work.

You learned how to avoid rubbing your pants between your legs and discreetly patch them if they are torn. If the information was useful to you, then share it with your friends on social networks.

Repairing clothes using a sewing machine

This method of sewing is easier than manual work. The result will be more durable and reliable.

How to mend a hole in jeans using a sewing machine?

1. To repair pants, first prepare a place for repair. First, remove the protruding threads, and then trim the edges of the hole so that no rags remain. Thanks to this preparation, you can stitch the patch more evenly.
2. Afterwards, a piece of material is cut out, the color and density of which matches the material of the trousers. Such details make the hole a centimeter wider.
3. How to fix a hole? The patch is fixed on the wrong side with pins, and then sewn on with a sewing machine. Craftsmen do not advise doing basting by hand, since after stitching it will be difficult to remove it.
4. Next, they darn from the outside, while placing the lines as close to each other as possible. It is desirable that the direction of the pattern coincides with the factory one.
5. Then the surface is filled with stitches that are perpendicular.

Patches

The matter will stop unraveling if you put a patch on the wrong side. Craftswomen cut a piece of fabric of the same shade (the material of any old denim item will be useful). A couple of horizontal cuts are made on it, which will be identical in size to the hole.

Afterwards, the seamstress carefully pulls out the longitudinal threads. When the holes match, step back a centimeter from each side and cut out a patch. Then the workpiece is placed under the abrasion and sewn with small stitches. In this case, the color of the thread is selected to match the denim.

Standard Patches

How to quietly sew up a hole in jeans? To do this, ordinary fabric patches are placed on top of the worn material. You can cut out a fabric square, attach it, iron it and secure it with pins. In this case, there should be a centimeter left for the hem on each side.

Then the part should be ironed, bending the edges and secured to the jeans. This method can be difficult to apply if the trouser leg is torn in hard-to-reach places. Sometimes seamstresses rip out factory stitches to better secure patches.

Replacing the damaged area

To sew up jeans discreetly by hand, craftsmen completely replace the torn part of the item, maintaining symmetry. To work, you will need 2 shades of thread: to match the color of the fabric and threads whose color matches the factory ones.

How to sew clothes correctly:

1. To begin with, the back and side seams of the pants are partially ripped out.
2. Then cut out the rubbed part.
3. Then the fabric for replacement is cut out. However, its shape must be identical.
4. The cut out part is applied to the prepared scraps and identical blanks are cut out.
5. Next, all the flaps are basted and sewn in so that the patch on the pants looks neat.

In order for the item to retain its appearance for a long time, the sections for the inserts are cut out in such a way that the guide threads are located diagonally. This way the material will stretch well.

Seamstresses use not only denim or stretch fabrics, but thick corduroy or leather inserts. They will look more harmonious if there is a patch on the legs, and not just in the crotch area. It is cut from the same material.

Leather patches for jeans, tips

Another type of patches for jeans is leather. They are very practical and look impressive. Old leather jackets, gloves and even boots can serve as material for a leather patch. In this case, you can cut out any shape in the form of a flower or geometric figure. Eco-leather patches are sold in sewing stores and online stores. They have special holes to make it convenient to sew them on by hand. Use leather patches on your knees or other places, they are quite durable and will last a long time. The location of such a patch can be at your discretion, the main thing is that it covers the hole and there is a margin of at least one centimeter. Prepare a thimble so that you can press on the needle comfortably. Place the jeans on a flat surface and apply a leather patch to the tear. Using suitable threads, sew on to match, sticking a needle into the holes.

How to repair jeans by hand

To repair jeans, you don’t have to be an experienced seamstress; it’s enough to be able to hold a thread and a needle and use it to make simple seams.

What you need for work

The threads you choose for sewing on denim must have high strength.

Threads from the following manufacturers have proven themselves well:

If these items are not available in the store, then the choice should be made in favor of reels with an inscription indicating increased strength. If the threads are cotton, numbers 50-80 are suitable. Synthetic threads – 50-60.

To repair jeans, you should use needles with numbers 11 or 14 and a sharp end. If you do not plan to make a decorative patch, then you need to use denim fabric of the most identical color or any other fabric that matches the shade. Additionally, you will need scissors and pins.

Patch

To make a classic patch, you will need 2 scraps of fabric. The first one will be used as a lining, so it can be any color. The second one, if possible, should be matched to the tone of the jeans, then the patch will be less noticeable. However, it is impossible to completely disguise a patch, so patches are often made, on the contrary, more noticeable.

Stages of work:

1. Patches should be cut from both pieces of fabric, the size of which should well cover the area of ​​damage and leave 1 cm for the hem.

It is not necessary to fold the bottom flap if the fabric is not loose. Also, if the selected piece of fabric is very dense, then the hem will add unnecessary volume, which can sometimes even rub the body when worn.

1. It is recommended to machine stitch the bottom patch. To do this, the flap should be pinned to the pants, then sewn around the perimeter using a machine. Next, you need to lay stitches in different directions inside this perimeter to better attach the fabric to the jeans.
2. You need to fold the edges of the outer patch so that the remaining fabric covers the hole and iron it. Then attach the patch to the jeans using thread or pins.
3. You can sew on a patch using any seam, from a hidden seam to hide the threads, to a looped one, which, on the contrary, will make the processed edge more visible.

General sewing tips

If the problem of holes and abrasions in jeans between the legs is constant, then it is recommended to strengthen this area of ​​​​the pants immediately after purchasing the product and washing it for the first time.

Also, you should not wait until the abrasion turns into a hole or a small hole becomes a big one. Taking preventive measures will increase the service life of jeans.

You should carefully consider the choice of fabric for the lining. For example, thick material or thick denim can subsequently chafe the body, especially if the jeans model is narrow. To make the repair of trousers less noticeable to others, you should take the time to find sewing threads that match the color of the fabric.

Sewing the edges

When the hole is small, has a longitudinal shape and does not have torn edges, it can be sewn up with an “over the edge” seam.

For greater strength, it is recommended to first sew the seam “forward with the needle” along the edge.

Strengthening the hole

Sometimes the hole does not need to be sewn up, but strengthened. Jeans that initially have rips and holes can, over time, increase in size and turn into holes, and the holes can become shaggy and untidy.

To prevent further unraveling of the fabric, as well as to update the jeans, you need to make a patch on the wrong side. To do this, you need to take material from old jeans and make two horizontal cuts, the size of which will correspond to the hole being repaired. Then you need to carefully pull out the vertical threads.

After the desired size is reached, this patch should be cut out, retreating 1 cm from the sides. At the final stage, the cut out patch must be sewn on, placing it on the inside under the hole. Sew on with small stitches using thread to match the denim fabric. You can also sew a lining patch in a contrasting color along the edge of the hole.

Preparing for work

Everyone always has a needle and at least three threads of primary colors: black, white and red. In order to sew up a hole really neatly, you must learn how to sew up a frayed element on clothing aesthetically, beautifully and without visible seams. Of course, it is difficult to deal with large holes, trying to make them completely unnoticeable, but if you try, you should definitely be able to sew them up efficiently.

An important point is the fabric from which the product is made.

Before sewing, first pay attention to the size of the hole, the edges, and how frayed this area of ​​​​the clothing is.

Hole processing methods

There are several ways to fix abrasions on jeans:

• sew up your pants with a hidden seam;
• cover the hole with a fabric patch;
• make a piece;
• use a patch.

If you urgently need to eliminate a hole, sew a denim patch of the appropriate size in its place. Color may vary. The patch can be sewn on both the reverse side and the front side. To ensure that the appearance of your clothes does not suffer, you should get creative with the shape and shade of the patch.

Decoration options

You can decorate a hole in your pants beautifully with an unusual seam, which will not only extend the wear time of the product, but will also make the clothes original. In addition, it is worth paying attention to bright patches. They can be sewn inconspicuously from the wrong side, slightly changing the boundaries of the hole itself to make it the required shape.

Today, different stripes are in fashion. They come in discreet designs and bright, childish ones. Patches are made with or without adhesive backing. Accordingly, the method of attaching them to the product will differ. Decorative elements can be sewn not only at the site of the defect, but also along the entire length of the item.

Japanese technique "Boro"

The technique originated in the Middle Ages in the Land of the Rising Sun. Boro art consists of numerous parallel stitches of equal length, hand-crafted. They resemble darning with coarse threads. For ease of use, needlewomen advise using long needles.

1. To repair damage to jeans, choose thin denim, cotton or linen fabric.
2. To work, choose a flap of any shape. The seam allowance should be 3-4 cm.
3. Finish the outline of the cut or hole with forward stitches using a needle. In this case, the damage will not stretch further.
4. Parallel to the outline of the hole, use a washable felt-tip pen to draw parallel lines for future embroidery. The distance between them can be 0.6-0.8 cm.
5. From the wrong side, baste the prepared patch.
6. Apply smooth stitches along the marked lines, which should be longer on the front side than on the back side.
7. You need to turn the stitch onto the next row from the wrong side. Continue embroidering in the opposite direction.
8. Make several rows of stitches on the bottom and top of the patch of different lengths, as well as on the sides.

The cuts on the flap can be slightly frayed if the flap is sewn on the front side of the product. To add style to the patch, you need to choose different stitch lengths and thread colors.

Invisible seam No. – “Ladder”

The first option of a hidden seam will be appreciated by lovers of all kinds of life hacks. It's all about the speed of its execution and versatility.

The ladder stitch is indispensable in the following situations:

• the item is torn at the seam;
• you need to sew together the parts of the product;
• sew the lining onto the jacket;
• sew a stuffed toy, belt or other product that turns inside out through the hole.

Invisible seam pattern:

We make the seam step by step:

• First of all, iron the seam allowances to the wrong side. We will sew by passing the needle and thread exactly into the fold.
• Thread a needle with a thread matching the color of the fabric and tie a knot at the end.
• Place the needle and thread under the seam allowance and pull it out at the edge of the piece to be sewn from the front side. The knot will be hidden in the fold.
• Insert a needle into the edge of the second piece opposite the first puncture. Under the fold, on the wrong side, make a small stitch (0.5 cm).
• Pierce the opposite side. The needle should go exactly into the edge of the fold. The punctures are located opposite each other. Sew a 0.5cm stitch under the seam allowance.
• Repeat until you have completed 4-5 stitches.
• Slowly pull the thread, tightening the edges of the parts.
• Continue sewing in the same manner until the end of the folds.
• Secure the thread with a knot and cut the thread.

A clear example of how an invisible seam is made:

Indistinguishable from machine stitching!

Video instruction:

This is interesting: Animal pattern (handle attachment) MK

Other repair methods

A hole in your jeans is not always a reason to be upset.

If you approach the problem creatively, you can create interesting and fashionable things.

How to hide a hole in jeans, fill it up beautifully, decorate it

There can be many options when the hole is not just sewn up, but also decorated.

How to sew a hole in jeans between the legs

Mending jeans between the legs using a machine may seem like a boring solution to the problem for some. Especially when modern fashion welcomes street style.

To take advantage of the opportunity and add a “zest” to your favorite pants, you can choose a deliberately bright thread for darning or, using traditional darning, perform sashiko stitches or any other embroidery.

How to fix a hole in your knee

You can decorate a torn knee using the Japanese technique of sashiko. Sashiko embroidery consists of simple forward stitches made with contrasting thread that can be worked in any direction.

Stages of work:

1. You need to cut a rectangular piece from the desired fabric. This part should be 3 cm larger than the hole.
2. Having placed the patch on the inside, you need to baste it. Since the hole is on the knee, the fabric of the patch should not be stretched, otherwise the knee will be difficult to bend.
3. To ensure that the rows of sashiko stitches run smoothly, it is recommended to draw the lines with chalk, a piece of soap or a special washable felt-tip pen.
4. Stitches should be short on the front and long on the back. In this case, a number of stitches must be made with a needle at once, collecting the fabric into an accordion.
5. How many rows to make depends on the imagination of the craftswoman. The main thing is that there are enough of them to secure the patch on the knee.

How to remove a hole in your butt

Holes do not always need to be darned or sewn up using classical methods.

Damage to pants on the butt, hidden behind bright appliqués or embroidery, often looks more interesting and natural.

How to remove a hole in a pocket

Jeans pockets often get worn out. Rear due to friction against outer clothing or chairs. Holes may appear on the front ones when there is a habit of keeping your hands in your pockets or carrying small things in them.

Jeans will look fashionable if you don’t hide the hole, but rather emphasize it. The only thing to keep it from spreading is to secure the edges.

The hole can be given any shape, for example, made in the shape of a heart. Small wear on the pocket can be hidden behind embroidery done with simple stitches. Embroidery and appliqués allow your imagination to unfold as much as possible.

There are many ways to sew jeans between your legs. For some it is easier to do this on a machine, for others it is better to sew by hand. If you have no sewing skills at all, you can glue an applique.

Sources

• https://tekstilprofi.com/poleznye-sovety/rekomendatsii-kak-nezametno-zashit-dzhinsy-mezhdu-nog/
• https://uborka-v-dome.ru/odezhda/zashivaem-dyrku-na-dzhinsah-mezhdu-nog.html
• https://tkanix.guru/krojka-i-shite/zasit-dyrku-na-dzinsah-krasivo
• https://studio-valentine.ru/remont-odezhdy/kak-postavit-zaplatku-na-dzhinsy/
• https://odezhda.guru/dzhinsy/rekomendatsii/463-kak-zashit-mezhdu-nog-nezametno
• https://21centurywoman.ru/kak-zashit-dzhinsy-mezhdu-nog-po-shvu-nezametno-vruchnuyu-bez-mashinki-nevidimym-shvom/
• https://handsmake.ru/kak-zashtopat-dzhinsy-mezhdu-nog.html
• https://heaclub.ru/kak-krasivo-sdelat-zaplatku-na-dzhinsah-mezhdu-nog-na-kolenke-pope-vyshe-kolena-svoimi-rukami-vruchnuyu-i-na-mashinke-prikleit-utyugom- instrukciya-krasivye-modnye-kozhanye-zaplatki-na-zhenskie
• https://camodelkin.ru/podelki/shtopka-dzhinsov.html
• https://hozzi.ru/sovety/kak-pochinit-dzhinsy-protertye
• https://tekstil-doma.ru/odezhda/kak-zashtopat-dzhinsy-mezhdu-nog.html

[collapse]

How to sew pants between your legs - reasons for damage to pants and repair methods

Popular wisdom says: “You are greeted by your clothes,” so taking care of your wardrobe is one of the key factors in the desire to make a good impression on others.

However, quite often a situation arises when your favorite trousers rub between your legs. This can lead to the fact that a familiar wardrobe item can be thrown into the trash, and its owner can go to the store for a new pair of pants (unless, of course, the pants are made to order and the studio has not established a guarantee for its work). It is worth remembering that the larger the wear on the pants, the more time, effort and skill it will take to eliminate it, so you need to start repairing worn trousers as soon as the wear appears.

Preventing chafing is much easier than sewing up pants or putting patches on them. To do this, you need to understand why abrasions occur on new-looking trousers and how to avoid this. This article explains exactly why this happens, how to avoid such a situation, and also how to sew your pants between your legs unnoticed.