In European clothing, raglan sleeves appeared at the end of the 19th century and were named after the English general during the Crimean War, Lord Raglan, who introduced a uniform of this cut in the army. Having first appeared in men's clothing, the raglan sleeve very quickly became popular in women's clothing. We will give examples of popular patterns for creating a stylish coat with an interesting raglan sleeve!
A raglan sleeve is characterized by the fact that it is one piece with the shoulder and is sewn along an oblique line that runs from the armpit to the neck. The peculiarity of this cut is the open armhole line coming from the neckline, as well as the sleeve, one-piece with the shoulder part of the product. The raglan sleeve has a very useful ability to correct the figure - depending on the inclination of the sleeve, you can visually increase or, conversely, narrow the shoulder line.
Coat pattern with raglan sleeves
The idea of creating this type of sleeve belongs to the British; in order not to feel discomfort if the seams get wet in rainy weather, it was decided to make the sleeve at an angle. A distinctive feature of a raglan sleeve is that this sleeve has a closed shoulder part along the entire length and a highlighted shoulder seam, i.e. the sleeve is formed from the neckline without unnecessary protrusions.
The classic raglan sleeve is cut out as a separate part from the back and front of the product. The sleeve should be located from the shoulder line to the neck line, i.e. the sleeve and shoulder form a single whole.
In order for the sleeve to be constructed correctly, it is necessary to shift the line of the middle of the shoulder slightly forward, to the shelf of the product, approximately at a distance of one centimeter, and raise the line of the back neckline by half a centimeter. After this, you should close the darts on the front and back, and then draw a piping line. Next, you need to combine the cut-off parts from the front and back and complete the contours of the raglan sleeve, thereby shifting the center of the sleeve and lengthening the sleeve line. How to cut a raglan sleeve is shown in the photo.
DIY large size women's raglan coat pattern
At first glance, there is nothing interesting about an ordinary raglan coat. However, this item of clothing has long gained popularity in the market. Thanks to the large selection of models, every woman can easily choose the best option. And if necessary, its pattern is not difficult to make.
Raglan is the most famous type of clothing with a simple pattern. Initially, it was believed that these clothes were an item of men's wardrobe. Nevertheless, today the cut with such a sleeve is popular among women.
A few words about the features of the model
Among the advantages of the raglan sleeve cut, it is worth highlighting the smoothness of the lines and femininity. Thanks to such clothing, you can ensure comfort because it does not hinder movement. Another advantage of such a model of any size is the attractiveness and softness of the lines. Anyone can make a pattern for it.
Who is this model suitable for?
This clothing is suitable for the following people:
- This model is usually chosen by successful business women or older ladies who want to emphasize their elegance. With the help of the raglan style, you can emphasize your excellent taste in choosing clothes.
- A large coat with raglan sleeves has been very popular lately. Usually girls choose such clothes with a simple pattern for walking with friends.
Types of raglan coats
Today in shopping centers you can see women's raglan coats of different shapes and styles. The model with slightly flared and straight sleeves is the most popular because it can be worn both in autumn and winter. A special feature of winter raglan clothing models in different sizes is the presence of fur, which adds elegance and sophistication to such models. And its pattern is simple.
The semi-raglan model looks interesting. This cut would be appropriate in spring or autumn, when it is warm in the morning and cool in the evening. Such clothes go well with both business suits and casual clothes with a simple pattern.
Raglan clothing with a hood is a beautiful and comfortable women's outfit. Such clothes not only help to follow fashion trends, but also provide good protection from the wind.
What to wear with this model?
Here is the answer to the question of what you can combine such clothes with:
- Keep in mind that the focus of a fashionable coat of any size can be overshadowed by poor wardrobe choices. It is better not to wear it with sports-style clothes, as such a combination looks tasteless.
- But such a semi-raglan coat can be a good completion of a business look. It is suitable for women who want to emphasize self-sufficiency. Casual dresses go well with this coat.
Benefits of a raglan coat
The raglan cut is distinguished by the absence of shoulder seams, which provides freedom for the arms to move. This is especially true for girls who have full arms, which creates a problem when choosing clothes with narrow sleeves. In addition, such clothes of any size give softness to the shoulder line and help emphasize the femininity of the silhouette.
Among the advantages of raglan is the fact that such a style with a simple pattern helps to visually reduce the shoulders. This is also facilitated by the choice of a women's model with short sleeves and a long collar.
In addition, this model suits women who think that their breasts are too large or small. This may sound paradoxical, but the raglan cut visually enlarges small breasts and reduces large ones. In this direction, you can achieve a greater effect if you choose a coat with sleeves of a simple pattern.
Tips for modeling raglan
To model a raglan sleeve you will need a pencil, paper, a tape measure, a product pattern, a calculator and a ruler. Once you have your paper ready, clear your workspace. It will be easier to work if the frame pattern is prepared initially.
Modeling a raglan sleeve is very simple - place one half of the sleeve on half of the coat and align the large shoulder section with the piping point. It is important that the sleeves are at an angle that can be easily varied taking into account the coat model being made. The shoulder cap will be more convex if the slope of the sleeve is greater.
Divide the neckline of the front of the raglan sleeve coat in half. From the resulting current, draw two smooth lines: one to the sleeve, and the other to the armhole of the coat. It is important that the shape of the lines is repeated in the upper part, and diverge downwards. The raglan for the back of the coat is modeled in a similar way. Transfer the pattern of both halves of the coat and sleeves onto tracing paper along the applied modeling line.
Another common way to model a semi-raglan sleeve is to transfer it to the chest undercut. For this purpose, transfer half the depth of the recess to the armhole. Move the remaining half into the waist dart. Add the missing length to the sleeves. Finish by modeling the back.
Raglan pattern
The main advantage of a raglan sleeve is that its modeling is very simple. This sleeve is cut in the form of a separate part from the back. It is important that it be one with the shoulder. The principle of correct construction of such a sleeve is very simple - shift the line of the center of the shoulder by one centimeter and raise the back neckline by a few centimeters. Next, when modeling such clothes, close the darts and draw a slope line.
The pattern of a coat with raglan sleeves will help the needlewoman sew a beautiful thing that will be a successful addition to her wardrobe and will remain relevant for several years. To sew such a model, rely on patterns. This coat is often tapered or with double-breasted fasteners.
When sewing such a coat, follow the pattern, but pay more attention to some details. So, in the process of sewing such a coat, raise the shoulder section up one centimeter. And also extend the side cut of the back to the lower cut of the sleeves, which should be narrowed from the side cut. The same requirements apply to the side and bottom sections of a coat with raglan sleeves. On the shelf, lower the shoulder cut by one centimeter on the shelf.
A do-it-yourself flared coat with raglan sleeves will look good. This coat model with raglan sleeves can be sewn using the same pattern. However, some details should be clarified. Raise the shoulder of the backrest by one and a half centimeters, as a result of which the shoulder section will be reduced. Lower the edge of the floor by the same amount.
The sleeve line of such a homemade coat is marked on the back, and the shoulder dart is moved to the sprout line. Next, the yokes are cut along the marked lines and the coat back yoke is placed on the back of the sleeve, and the front yoke is placed on the front.
1igolka.com
Current styles of coats with raglan sleeves in the season
Designers this season are focusing on femininity, and the raglan style is perfect for this purpose. It is raglan that, better than all other styles, creates a soft and sophisticated silhouette; the single line of the shoulder and sleeve creates smooth, free lines that emphasize the figure.
A feature of this year's styles are slightly flared or shortened sleeves and a slightly narrowed hem - it seems to close the silhouette, giving it an oval shape.
The most fashionable pattern of this season is the checkered pattern, which goes well with the style, adding individuality and a slight challenge to the image.
Pastel shades also look very elegant - pearl gray, soft beige; among the dark shades, rich tones of gray and complex tones of brown stand out especially.
Depending on the number of seams, it can be single-seam, two-seam or three-seam.
As an example, look at the photo with various types of raglan sleeves, the most fashionable this season:
So, let's try to understand the features of constructing a raglan sleeve. Since we have the spring season ahead, we will master this technique using the example of a coat pattern with raglan sleeves of a semi-fitting silhouette with reliefs on the front and back:
LiveInternetLiveInternet
Quote from Sima_Peker's message
Read in full In your quotation book or community!
Short coat - “swinger”, flying cut https://www.stranamam.ru/post/1638466/
Nowadays, contrasting combinations of surfaces are in fashion - shaggy and mirror-smooth, matte and shiny, “aged” and shining, dense and delicate, weightless. The only requirement for them is the predominance of soft shades. So, you decided to sew yourself a coat. Having chosen the silhouette and details, choose pure wool: it will fit better and last longer. We recommend fabrics with a pronounced “dry” structure - tweeds, bouclé, melange, cheviot, gabardine, “homespun”. Details will play an important role in your renovation. Flaps on pockets, collar and cuff flaps, buttons, belts - all this should be emphasized by stitching and contrasting materials (leather, velvet). As for the color of the fabric, choose any one. And now all the pros and cons are taken into account, the coat is ready. All that's left is the little things left - the additions that will make you irresistible. This season, fashion offers small hats with trim, long or cuffed gloves, elegant belts, bright scarves, shawls and, of course, bags. It is better to choose small and medium-sized bags, with “frame” locks, with two short handles or thin long “over-the-shoulder” handles. Suitcase bags and soft trunks are also fashionable, and various backpacks are suitable for young people. Well, on the eve of the holidays, you can look at the online carnival costume store for a new outfit for an absolutely stunning look. This is a short “swinger” coat with a flowy cut. We offer a basic model of such a coat. Well, and then your imagination and tastes take the reins - sleeve length, belt, coat length, collar. All this can be easily modified according to your wishes. Wool gabardine is a good choice for this short swinger coat. Velvet can be used to trim the top collar and covered buttons. For a short coat - “swinger” size 44-46 you will need: wool gabardine - 3 m 30 cm with a width of 150 cm, velvet 20 cm with a width of 90 cm, lining fabric 3 m 10 cm with a width of 140 cm, non-woven or lining for lining, Raglan shoulder pads, 6 buttons covered in velvet. Cutting details: shelf - 2 parts; burlap pocket -4 parts; back - 1 piece, whole with fold; front part of the sleeve - 2 parts; back of the sleeve - 2 parts; collar - 2 parts, whole with fold: upper velvet collar - 1 part; lower collar made of main fabric - 1 piece.
From the lining fabric, cut out the shelves (excluding the hems), the back, sleeves and burlap pockets with seam and hem allowances of 1.5 cm.
Sequence of work 1. Lay out the cutting details on the fabric and cut them out taking into account allowances for the main seams (1.5 cm), hem of the bottom of the coat (4 cm) and the bottom of the sleeves (3.5 cm). Strengthen the edges of the shelves, the lower collar, and the bottom of the sleeves with a gasket. 2. Sew side seams, leaving pocket openings open. 3. Pin the burlap pockets from the wrong side to the allowances of the pocket entrances, folding them right sides together, and stitch exactly along the marked lines of the side seams. Iron the burlap forward. On the front sides of the shelves, stitch the entrances to the pockets at a distance of 2 cm from the edge. Sew burlap pockets 4. Sew shoulder seams. 5. Stitch the upper and lower edges of the sleeves, hem the bottom of the sleeves. Sew the sleeves into the armholes. 6. Fold the collar pieces right sides together and sew them cleanly from reference mark 5 along the outer contour. 7. Turn the collar inside out, iron it and, taking the open sections together, sew it into the neckline. 8. Fold the hems right sides together with the shelves and, without interrupting the stitching, stitch along the edge, along the neckline, and sew the collar into the back neckline. Turn the hem to the wrong side and iron. 9. Hem the coat. Sew the hem to the hem of the bottom. Topstitch the coat at a distance of 2 cm along the sides and 3.5 cm at the bottom. 10. Sew on the shoulder pads. 11. Sew seams on the lining. Fold the hem allowance for the bottom of the lining and stitch it so that the lining is 2 cm shorter than the coat. Sew the lining to the coat. 12. On the right shelf in the marked places, sew over the loops. Sew buttons.
✄ Drawings of patterns for coats and linings in the gallery
1 of 7
Drawing with a set of patterns for sewing a coat with your own hands
The set of patterns for a raglan coat with a large stand includes the following patterns (Figure 1 in the gallery above):
- back,
- shelf,
- collar
- and sleeve.
Patterns for the hem and lining are not included in the kit, since these parts are cut using the same patterns for the front, back and sleeves (see the gallery of drawings ☝). The collar can be cut out either using a pattern or without it, which is described in detail on my website on the page with the finished pattern.
