How to wash fur from a hood. How to wash fur from a down jacket. Cleaning fur on boots

Home / Eco-friendly house

Back

Published: 07/12/2020

Reading time: 7 min

1 Other methods
2 How to restore the purity of a denim jacket with faux fur
3 How to wash a down jacket collar made of natural and faux fur
4 How to wash clothes with fur on the hood
5 How to wash a faux fur coat in a washing machine
6 Starch and gasoline
7 Is it possible to wash faux fur?
8 General recommendations
9 Preparing for washing
10 Processing tips
11 Cleaning using traditional methods

Other methods

If you cannot wash the fur from a down jacket with water, use alternative folk remedies.

Rye and wheat flour will help remove dust and dirt accumulated between the pile. Roll the collar with the substance, distribute the washing product throughout the product. Knead the fur with your hands and shake. A vacuum cleaner with an attachment will help remove white grains.
River sand is an effective cleanser. It replaces store-bought detergents. Pre-heat the bulk mixture in a frying pan or baking sheet. After waiting for it to cool down, distribute it among the items. The product will absorb dirt. After 20 minutes, you can brush over the treated area of the down jacket.
Shaking and beating the product with a bamboo stick helps remove dust and fine dirt. If the stains are ingrained, the fur will have to be washed. After the procedure, additionally vacuum the item using the sofa nozzle.
The abrasive cleaning method is suitable for light-colored products. Hardwood sawdust is used and can be mixed with softwood sawdust. Dry plants can damage the pile. Saturate the elements with gasoline, spread evenly over the surface, and wash. Rub in gently, leave for a while, shake and comb the fur.

How to bring the purity back to a denim jacket with faux fur

A denim jacket, insulated with synthetic fur or decorated with a fur collar, is a must-have in the wardrobe of any fashionista. A stylish denim item is quite problematic to care for. Saturated dark fabric is prone to washing off paint, which, in turn, settles on light-colored collars. In addition, thick denim is washed only at high speeds and high temperatures, which is unacceptable for synthetic material. How to wash jeans with a faux fur lining or collar:

conduct a color fastness test;
For intense stains, soak for a short time;
wash in machine or by hand;
do not squeeze;
dry carefully.

When new jeans are washed for the first time, they turn the water a rich blue color. This is especially true for budget clothing. To prevent the dye from ruining the synthetic fur lining, it is worth checking the dye fastness in advance. To do this, you can soak the sleeve of the product in warm water for 15-30 minutes. If the water becomes colored, then the item should be washed exclusively in cold water and as quickly as possible. It is recommended to add a color enhancer.

It is better to first lubricate pronounced stains on the jacket or lining with laundry soap and soak for 30-60 minutes (provided that the item does not fade). After this, the clothes should be placed in the machine with a gentle liquid product. For short and dense fur, you can use regular washing powder.

It is strictly forbidden to choose modes with spin or intensive cleansing. It is quite possible to wash the item by hand. To make cleaning thick denim easier, use a soft brush. It is necessary to rinse in cool water; adding conditioner is allowed. The jacket must be dried on a horizontal surface or hanger. Clothespins may leave creases on the product.

Technology and special tools

Washing technology may vary depending on the type of fur; special products also differ. You can use both store-bought and folk remedies. Which one to choose is up to you.

Basic washing rules:

Dry cleaning method: a fur collar can be restored to its original form using a suede brush. Before cleaning, the brush should be dipped in warm water and slightly moistened. You need to carefully ensure that the fur does not become wet, otherwise it will be extremely difficult to clean an overly wet product.
For the wet cleaning method, you can take a little shampoo diluted with water. Then you need to slightly wet the collar with the resulting soap solution, and then go over it with a comb with thin teeth.
A white fur accessory requires very delicate handling. Like a white down jacket, a faux collar cannot be washed with detergent that contains chlorine. To a product that has lost its original whiteness, you can add a small amount of ammonia at the time of washing.
The product should be washed in an automatic machine without the spin option.
The wet collar is dried exclusively in a dark area of the room where lighting is not used, or in a room without windows.
When washing, using bleach with chlorine and washing at very high temperatures is strictly prohibited.
If the fur pile on the collar is long, dry cleaning is carried out strictly from the base of the fur in the upward direction, and if the fur is short, then, on the contrary, against the wool.
Before you start cleaning fur from dirt, you must first test the selected product on a small piece of fur. Then you should wait a few minutes and dry the collar. If nothing bad happened, everything is fine with the product, then you can completely clean the fur collar in the same way.
It is not recommended to rub the fur on the product vigorously to prevent holes from forming in these places. The collar should not be vigorously wrung out; it should dry naturally, and away from heating devices.
Do not wash your fur collar at too high a water temperature. It should not exceed 40 °C. Too hot water is detrimental to the fur edge of a down jacket.

By following these rules, you can deal with dirt and dust on it without damaging the product. In return, a down jacket or raincoat with fur will last a long time and look like new.

Dry cleaning

Dry cleaning technology is applicable for collars with natural fur.

If you want to wash a jacket with a fur collar at home, then take note of some dry cleaning tips:

Potato starch does an excellent job of removing stains on a natural fur collar. To do this, pour a little dry potato powder onto the fur edge, then spray a solution of shampoo and water on top from a spray bottle. You should not spray too much of the compound on the collar, so as not to spoil it. When the starch mixes with the soap solution and becomes mushy, you need to carefully remove it with a brush.
Take rye or wheat flour in small quantities, then pour it into a suitable container and roll the fur collar in it. After these manipulations, shake off the flour from the product. If you cannot completely remove it manually, you can use a vacuum cleaner with a suitable attachment.
Sand is used as a purifier (you need river sand, not sea sand). It must be heated over a fire (or in the oven), then thoroughly rub the collar with sand over the entire outer surface. After 15-20 minutes, when the sand becomes cold and absorbs all the dirt, it needs to be properly shaken off the fur.
For the dry cleaning method, the collar is thoroughly shaken, then beaten with a bamboo stick. These actions will help rid the fur product of dust deposits and small particles of dirt. Additionally, you can vacuum the raven using the nozzle for the sofa and armchairs.
If particles of old dirt are visible on the collar, you can get rid of them manually. You need to act very carefully so as not to tear the fur from the base of the collar. Then dip the washcloth in a small amount of warm water and gently work the fur with it. Do not wet the product too much. After this, the fur is combed using a brush with sparse teeth.

Using the recommendations given in this section, you can easily clean your fur collar yourself. Wearing a beautiful thing with a collar that has been cleaned to a shine is always a pleasure. In the winter season, the collar will look great and will warm you with its warmth in any frost.

Machine washable

Machine washing is less troublesome than dry processing a fur product.

A fur collar is washed in this way:

First of all, the product is unfastened from the down jacket and placed in the drum compartment of the machine.
For washing, choose a delicate cycle, the water temperature should be 40 ° C (no more).
The required dose of dry or “liquid” powder is added to the detergent tray.
After completing the operation, the collar should be placed in a horizontal position and left to dry naturally, shaking the product periodically.

If the fur on the jacket is not fastened with rivets or a zipper, but is securely sewn to the hood, such a product cannot be washed in a washing machine, even using the delicate cycle. In this case, you can use dry cleaning services or wash the down jacket by hand, being careful not to wet the edges.

How to wash a down jacket collar made of natural and faux fur

Any type of outerwear with a fur collar looks more elegant and more expensive; such decorative trim immediately transforms the item.

We invite you to familiarize yourself with the methods of designing paper napkins

Even with very careful handling, there comes a time when cleaning is simply necessary, but not everyone knows how to wash a fur collar from a down jacket at home.

Most manufacturers do not recommend carrying out the procedure yourself; dry cleaning specialists will do everything in the best possible way.

However, the procedure is not cheap, and it can take quite a lot of time. Therefore, we will learn how to clean the collar of a jacket ourselves, using improvised means.

Cleaning a Bolognese Jacket

Bolognese jackets are quite durable. Unlike a down jacket, they can be washed in a machine without the risk of being damaged. But if grease is only on the collar, it is better to clean it separately. This will save time. The owner does not have to wait until the item dries and can be worn.

The most effective and easiest way to cleanse is to use laundry soap. Rub the problem area with it and leave the jacket overnight. In the morning, rinse off the soap along with the dissolved fat, and leave the collar to dry. Another option for cleaning the collar of a Bolognese jacket is a mixture of liquid soap and soda.

How to wash clothes with fur on the hood

Fluffy trim adorns knitted cardigans, padded jackets and practical parkas. The process of washing fashion items is greatly simplified by detachable faux fur. It is also very clear to care for a hood with a zipper or buttons. There are the following options for washing a product with a fur hood:

The hood with fur, detachable from the jacket, is washed separately. To do this, it is placed in a special bag for delicate washing and placed in a washing machine with liquid detergent for synthetic fabrics. The water temperature should be no more than 30 degrees. When finished, the fur should be dried thoroughly and then combed with a regular brush.

It is better to freshen delicate fur by hand. The detachable hood is placed in warm water with laundry soap. The fabric itself can be gently rubbed with a brush, and the insert can be rinsed in a soapy solution. Next, the product must be dried and combed.

The most labor-intensive option is a product with a one-piece cut. You can wash such an item in automatic mode only at your own peril and risk. The best solution is to soak the item of clothing in warm water with laundry soap or gel. It is advisable to avoid immersing the fur in the basin. Next, the fabric must be rubbed with a brush or by hand, rinsed carefully, and squeezed out everything except the fur.

Note! It is forbidden to dry fur products over a radiator or stove. Exposure to dry air leads to a deterioration in the aesthetic qualities of clothing and can lead to shrinkage of the item. If the fur becomes electrified after drying, it should be treated with an antistatic agent or conditioner spray.

Cleaning suede

Suede also requires special care. When cleaning, it is better to use special rubber brushes, which can be found in a leather and suede store.

Important! This material must not be cleaned with abrasives. If you use household chemicals for purposes other than their intended purpose, traces of shedding may appear as the paint will come off from the suede.

To avoid unpleasant consequences, it is best to use a mixture of soda and milk:

Heat 200 ml of milk in the microwave or in a water bath.
Add 1 teaspoon of soda to a glass of milk.
To stir thoroughly. Pour a few drops of liquid onto each stain. Rub until dirt is removed.

The composition may leave small light stains. They can be easily removed with a sponge or cloth soaked in water.

How to wash a faux fur coat in a washing machine

Such a large and heavy product is, of course, difficult to wash by hand. However, machine washing can damage the item by ruining the fur or changing its shape. Whether a faux fur coat can be washed should be checked on the label of the item of clothing. If the manufacturer does not prohibit such care, the following nuances should be taken into account:

You should use only warm water;
The product should be washed as rarely as possible;
It is prohibited to use “aggressive” modes;
It is better not to use washing powder;
the product cannot be wrung out;
The item should be dried away from heating appliances.

Before washing a faux fur coat, you should fill a container with warm water with the addition of soap shavings or gel for gentle cleansing. If necessary, pre-soaking of the product is allowed. It is strictly forbidden to wash a fur coat in hot water - this will cause the lining to shrink and cause the fur to fall out and become fluffy.

For washing, delicate modes that do not involve spinning are best suited. If the device allows, then it is worth reducing the number of revolutions and setting the lowest water temperature. For best results, gel or liquid laundry detergents designed for synthetic clothing are recommended.

We invite you to read How to clean faux fur at home: effective methods and recommendations

As with other faux fur products, the immutable rule for synthetic fur coats is drying under natural ventilation without exposure to heating devices. Clothes are not hung on clothespins or folded on lines. Bends on artificial material are almost impossible to correct after the item has completely dried. After cleansing, the fur coat is combed and sprayed with conditioner.

How to wash fur trim

It often happens that the fur trim of the hood, in contact with the face, becomes contaminated with various cosmetics. As a result, an unsightly greasy sheen forms on the surface of the fur. To deal with this kind of stain, you need to purchase a special detergent for washing delicate items. Following the instructions, you need to rinse the fur and dry it at room temperature.

If this option does not suit you, then you can use a fairly simple folk method. It involves using chicken eggs. You will need two raw eggs, which should be beaten well, and use your hand to rub the egg mixture into the fur. The product should remain in this state for about an hour. After this, it is necessary to place the fur edge under running water, the temperature of which should be approximately 25 ° C. The fur must be rinsed for at least 30 minutes. After which you should thoroughly dry the edge.

If the edge of your hood is made of natural fur, then after washing and drying it is worth ironing the product through plain white paper. You should not do this kind of manipulation with faux fur, as you can damage the synthetic fibers and ruin the fur edge.

White fur trim looks very elegant and beautiful, but white fur tends to quickly lose its presentable appearance. To prevent premature yellowing of white fur, you can use talc in combination with hydrogen peroxide, taken in equal proportions. The mixture should be applied in a thin layer to the fur, brushed with a brush, and then thoroughly shake the edge, removing any remaining product.

Fur products are not only warm, but also very beautiful. Such items in the wardrobe are usually in demand for more than one season and never go out of fashion. But over time, the fur gets dirty, spots appear on it, dust settles and the color may even change. Then the question arises of how to wash fur and products made from it correctly and safely in order to return things to their original appearance. In this case, you should follow some rules and try to be as careful as possible throughout the entire process.

Starch and gasoline

A great way to wash the fur from a down jacket dry is to treat it with starch and gasoline. These two products perfectly collect dust and dirt, and even remove stains.

For such purposes, you need to take special household gasoline, as it is well purified. Car gasoline will not work for cleaning the edge. Mix potato starch and gasoline to make a paste. The mixture is applied to the most contaminated areas of the collar and left for 30 minutes. Then the product is cleaned with a brush and the remaining cleaning agent is shaken off. Usually the erased edge becomes much cleaner after the first procedure.

Can faux fur be washed?

Faux fur can be washed provided that the relevant information is provided on the tag. The latter also indicates the permitted cleaning method (mechanical or manual). At the same time, regardless of the type of material from which the fur hood or fur coat is made, the following recommendations must be followed when washing:

The pile can be soaked in water for a long time and dried with cold air.
Due to prolonged drying near heating devices (radiators, hair dryers, etc.), the fur pile loses its former shine and becomes harder.
Ironing fur is prohibited. Instead, it is recommended to use a soft sponge or brush designed for this material.
Faux furs should not be washed at home using aggressive substances or bleaches.
Wash using liquid soap or gel. Washing powder granules often get tangled between fur fibers.
It is not recommended to wash faux fur in washing machines or by hand too often. It is better to carry out the procedure as it gets dirty.
Do not soak fur coats in water at high temperatures.

Be sure to read the tag before washing. In this photo, the fur product can be washed at 30 degrees.

It is especially difficult to wash a faux fur coat with long white pile. Due to incorrectly selected cleaning products, the material turns yellow and breaks.

Features of cleaning natural fur of different animals

It is easy to check the degree of contamination of the product yourself. Turn on the hair dryer and direct the air currents to the pile. If it scatters, returns to its original position, and has the same shine, the material is clean. A greasy, sticky item must be washed.

The method for removing stains from fur is selected taking into account the type of material:

Products made from mink and silver fox are washed using a dry or wet method. For minor stains, apply talc with a sponge, leave for a few minutes, and comb out the fur with a brush. A solution of equal amounts of vinegar and medical alcohol is used. The product is removed with a dry cloth.
To wash the Arctic fox, use a composition of 1 tbsp. l. ammonia, 1 liter of water. Dip a rag in the solution and touch the stains with it without rubbing. If the pile has turned yellow, it is cleaned with hydrogen peroxide.
Oat and wheat bran quickly remove dirt from fox fur. Heat the product in a frying pan, spread the clothes on a flat surface, and pour the grains on top. The method effectively cleans the item without washing. Use a brush to go over the pile well, remove any solid residue with a vacuum cleaner, and shake several times.

General recommendations

Before washing the collar of a down jacket, it is necessary to prepare the product; just because of one fur, you should not wash the entire thing.

Preparatory work is carried out as follows:

The jacket collar is carefully unfastened from the entire garment.
Next is to find out what type of fur we will clean. How can you determine this? The base will tell you whether it is natural or artificial; natural fur will have leather, while artificial fur will have a fabric base.
Before carrying out work, carefully study all available information from the manufacturer on the tag.
Be sure to shake out the decorative element and use a vacuum cleaner with a brush.

Depending on the quality of the fur, further cleaning is carried out in different ways. Is it possible to wash fur from a down jacket in a machine? How to wash a fur collar? We will look for answers to these questions further.

We suggest you read why the washing machine makes a lot of noise during the spin cycle: causes, troubleshooting

Preparing for washing

Before washing a fur coat or other fur clothing, you must:

remove dust and other contaminants by knocking out or brushing the product;
clean small stains using suitable products;
Turn the clothes inside out and fasten all the zippers and buttons;
if it is necessary to wash the collar, then the latter must be unfastened from the jacket.

It is necessary to wash a faux fur coat separately from other items. If there is a lot of space left in the automatic machine after inserting the product, then it is preferable to choose manual cleaning of clothes.

Before each wash, faux fur must be soaked in warm water with diluted liquid soap for 15–20 minutes. It is recommended to begin cleaning white pile by treating it with a cotton pad (sponge) soaked in lemon juice.

Liquid gels (HELP, Yplon and others) created for cleaning faux fur products are used as laundry detergents.

Cleaning a Leather Jacket

Leather is more sensitive to chemicals than fabric. Therefore, you need to clean it carefully, using only gentle home remedies or purchased ones recommended by the jacket manufacturer.

A simple recipe for cleaning a leather jacket collar from grease using soda:

Mix a tablespoon of baking soda with a tablespoon of water.
Rub the resulting slurry into the dirt.
Remove gently with a damp sponge.

Second method, for strong stains:

Wipe the stain with alcohol. It will dissolve the fat.
Drizzle lemon juice. It will help remove residual fat and remove unpleasant odors.
Remove any remaining alcohol and juice with a damp sponge and then apply glycerin. The substance will return shine and softness to the material.

Processing Tips

To prevent the edge of a winter jacket or down jacket from turning into a shapeless piece of fur, you should adhere to the following recommendations:

Fur (both artificial and natural) should not be exposed to high temperatures. Fur collars are washed only at a temperature of 30-40C.
When washing, fur should not be wrinkled or rubbed. All movements must be extremely careful.
The edges of jackets and down jackets must not be treated with bleaching or chlorine-containing products.

Drying

After cleaning the fur collar, it must be thoroughly dried . This is a very important point, since moisture remaining in the fur fibers can cause an unpleasant odor and damage to the product.

Dry the fur collar in a darkened room. Direct sunlight contributes to loss of color and brittleness of the villi. Under no circumstances should fur be split on a radiator or other heat sources or ironed.

Advice! Pre-blotting the collar with a towel will help speed up the drying process.

Cleaning using traditional methods

If the wet method failed to tidy up the decorative element, then time-tested folk recipes will come to the rescue.

Their components are always on hand in every home, and the procedure does not take much time.

How to wash fur on a collar using available products? There are many methods, everyone will choose the most suitable one for themselves:

A mixture of a glass of water, a teaspoon of peroxide and a couple of drops of ammonia is placed in a spray bottle. The treatment is carried out over the entire surface of the decorative element, allowed to dry naturally, but not in the sun. This option is also suitable for collars sewn to outerwear.
The mink collar is cleaned with a small amount of starch or semolina. Bulk products are applied to the product and lightly rubbed. After 5-7 minutes, shake out and comb.
Oily traces can be easily removed with purified gasoline; just apply a small amount of the substance to a cloth and simply wipe the problem areas.
Medical alcohol, vinegar essence and water in equal parts have the same effect and are applied in the same way. No need to rinse off.
A solution of a teaspoon of ammonia, 3 tsp, has grease-removing properties. kitchen salt diluted in a liter of water. Apply from a spray bottle or with a soft cloth with light rubbing movements.
Products made from arctic fox or beaver are cleaned with heated sand. Sprinkle it on the decorative element and rub it gently. Shake and comb until the cleaning agent is completely removed.
A sponge soaked in vinegar will renew the fox collar.
Lemon juice will restore the rabbit's original appearance.
Heated bran will return the original appearance to astrakhan fur and rabbit fur. They are sprinkled on the product and shaken off after 20 minutes.

We found out how to wash fur from a down jacket of natural origin. But there is also an artificial type of finish, what to do with it? How can I update this view?

Dry cleaning the collar

https://www.youtube.com/watch?v=kVQl5Rn0uNc

To clean the fur dry, it will take about ten minutes.

To do this, you need to take ordinary starch, semolina, talc, or any other small substance that absorbs fat and moisture well.

Pour the powder into your hands and begin to rub into your fur. The croup will gradually begin to darken, while the collar will become cleaner and cleaner.

There is no need to rinse anything after such cleaning; just thoroughly rub off the abrasive and comb the fur.

Washing a fur collar at home is quite easy, just follow the above rules.

It is not recommended to wash natural fur, as well as several types of artificial fur, so that the material does not lose its original appearance. An alternative to wet cleaning is dry cleaning, which you can do with the help of improvised means.

Starch

The procedure is suitable for cleaning removable collars. Processing order:

Unfasten the fur from the collar.
Place the fur piece in a plastic bag.
Pour in the starch and shake the bag thoroughly.
Without removing the bag, scrub the surface of the fur with a brush.
Remove the product from the bag and knock out the remaining starch from the pile.

After the procedure, be sure to ventilate the collar in the fresh air.

Bran

Rye or wheat bran is suitable for the procedure.

Heat 300–350 g of bran in a frying pan.
Place the fur on a clean cloth.
Sprinkle the pile with hot bran.
Rub the mixture into your palms, moving against the pile.

After treatment, comb out the fur with a wide-toothed wooden comb.

A mixture of salt and semolina is suitable for cleaning short-pile collars. Mix the products in equal proportions and apply to the surface. Clean the pile with your fingers or a brush, and then remove any remaining substances by shaking out the product. Semolina with salt perfectly absorbs dirt and dust. You can see this when you shake out the substances from the collar. Repeat the procedure until the substances removed from the pile are clean.

Before the procedure, slightly heat the sand in a clean frying pan. Apply heated sand to the undercoat and rub it into the pile in a circular motion. The substance will absorb dust and greasy deposits. At the last stage, brush off any remaining sand from the collar.

Be sure to sift the flour several times before using. Next, follow these steps:

Brush the fur thoroughly.
Sprinkle its entire surface with flour.
Using a brush, distribute the flour, as if combing the fur against the lint.
Using a back and forth motion with the brush, rub the flour into the base of the pile.
After 5 minutes, carefully beat the flour out of the fur.

After the procedure, comb the pile with a comb.

Regular baby powder without additional impurities and oils is suitable for removing greasy stains and dust from the surface of the collar. Cover the entire surface with talc and rub thoroughly into the base of the pile. Leave the powder on the surface for 10-15 minutes, and then shake off any remaining residue from the collar. You can completely remove powder residue from the fur using cold air from a hairdryer.