Step-by-step instructions with photos for beginners will help you sew a beautiful and comfortable wrap skirt with ties. The main thing is to choose the right fabric and cut out the details from it correctly.
Layout plan for pattern
To make the product beautiful and convenient, when constructing the pattern you should adhere to the plan:
- Lay out tracing paper, a piece of wallpaper or old newspapers on the table.
- If there is no ready-made stencil, you can sketch a sketch by tracing another skirt that is suitable in size and cut.
- Take measurements and write them down on a piece of paper.
- Correct the sketch or build a pattern from scratch using the measurements obtained.
- Add 1-2 cm on all sides for seams and edge finishing.
- Cut out a template from paper.
How to take measurements correctly
To quickly make a beautiful skirt with your own hands, you need to take the measurements correctly. To determine the waist circumference, the centimeter is placed horizontally at the narrowest point. The measuring tape should not be stretched as this may cause the finished product to end up being the wrong size.
You will also need to measure your hip circumference. The tape is positioned horizontally. Care must be taken to ensure that it passes over the most convex area of the buttocks. The centimeter is placed freely, without tension. The measurements are recorded as follows:
- From – waist circumference;
- About – hip circumference;
- V – product length;
- D – distance from waist to hips.
Hip height is the distance between the waist line and the most protruding points of the buttocks. Depending on the elasticity of the fabric and the desired width, increases are made on the skirt. This feature is always taken into account when creating a pattern. Up to 1 cm of material is additionally left at the waist, and up to 2 cm at the hips.
Pattern construction and cutting
The main condition for the idea to be a success is to take the measurements correctly. The waistline should be measured at the narrowest part. You can navigate by the bend of your elbow. The line of the hips - along the most protruding points. It is also important to measure the distance between these two lines. The desired length of the product should be measured from the waist line.
Difficulty may arise when constructing recesses. They are not needed on all models, but they help make an outfit fit your figure. Typically 2 undercuts are required at the back and 2 at the front. In this case, the length of the first can be 8-9 cm, and the second - 11-12 cm. The width of each is 2-2.5 cm. After transferring the template to the fabric, the recesses need to be cut and then swept away.
A skirt with buttons or a zipper is comfortable, but a belt allows you not only to secure the outfit on the body, but also to adjust it to a changing figure or, if desired, to wear it a little higher or lower. This option is especially suitable for beginners. After all, cutting a belt is simple: cut out an elongated rectangle of fabric, fold it in half and sew it to the main part.
If desired, you can sew a culotte or shorts with a wrap. Unusual models combine beauty, femininity and comfort.
Ironing
Before you start sewing and processing the details of the skirt, you need to make preliminary preparations - iron the belt so that it is more convenient to baste it to the skirt panel. If you had to cut out two parts of the belt, then stitch them into one long strip, folding them with the right sides inward. Press the seam. Then place the piece face down, fold the waistband in half lengthwise and carefully iron the resulting fold. Lay the piece out again with the front side facing the tabletop, unfold the longitudinal central fold. Now tuck first one longitudinal edge to the central fold, and then the second edge. Iron both folds, fold the waistband along the center fold and carefully iron the entire waistband.
The chief epidemiologist of the Ministry of Health named the period for the decline in coronavirus incidence
Confusion, myocarditis, insomnia: what is the “Covid tail”
“We are already happy”: Sergei Astakhov on the reasons for the lack of a stamp in the passport
If the fabric you decide to use for sewing a skirt is difficult to iron or is too thin, use a damp cotton towel or diaper. For reliability and ease of work when sewing a skirt, pin up the folded edges using tailor's pins. Remember to carefully pull them out one at a time while using the sewing machine to avoid damaging it. If you have the desire and opportunity to spend a little more time on preliminary work, then you can not pin the folded edges of the belt with pins, but sweep the needle with the seam forward.
Materials for production
For a prototype with a smell, easily draping materials are most often used. You can choose natural thin fabric or dense synthetics. It depends on the purpose of the clothing, as well as the preferences of its future owner.
Suitable material:
- cotton;
- linen;
- jeans;
- silk;
- knitwear;
- Niagara;
- chiffon;
- satin;
- viscose.
A leather wrap skirt looks unusual, fashionable, and stylish. It does not require a lining underneath.
The non-woven insert in the waistband will make it dense and hold its shape well. You can also use various accessories and decor. When working, you cannot do without a standard set, including materials for creating patterns and sewing accessories.
Before starting work, it is recommended to wash, dry and iron the fabric. This will avoid problems with shrinkage of the finished product.
Fabric processing
The belt is ready, all that remains is to process the edges of the main panel of the skirt. Place it on the table with the right side of the fabric facing down. Move one side cut closer. Fold the edge in 1 centimeter and pin the hem, leaving the heads of the pins on the right side of the fabric. Go through the whole edge like this.
Then fold the fabric again by 1-1.5 centimeters and pin the hem again, removing the previous pins. You now have a double hem of fabric, hiding one raw edge. Fold the second side cut in the same way. Sew both sides of the skirt using a sewing machine in one line.
England: 18th-century farmhouse in the middle of a motorway
Change passwords more often: the most dangerous “smart” home spy devices are named
Purple and orange: 5 stylish combinations of shades in clothes for spring 2021
Step by step instructions
This outfit can be sewn with or without darts. The length should be chosen to suit your specific figure. The smell can be made invisible or emphasized from the front or side.
Wrap skirt without grooves or seams
The simplest option, which even a beginner can handle sewing, is a beach model. You don’t need to create complex patterns, make grooves, build in a zipper, etc. All you have to do is sew on the belt and trim the edges. To sew a beach skirt, light flowing fabric is used, for example, silk, chiffon, cotton.
Sequencing:
1 Measure your waist circumference at the narrowest point.
2 Take a piece of material, the length of which is equal to double the length of the future item of clothing plus another 50 cm.
3 Unfold the fabric, then fold the edges along the edge.
4 Cut edge, mark 1.5cm for seam allowance.
5 Divide the measured waist volume by 3.14, the resulting number will be equal to the waist line. Set this parameter aside on both sides of the corner and draw a radius.
6 From the waist line, measure the required length + 3 cm for the hem, draw another semicircle below - the bottom of the skirt.
7 You need to add the smell to the resulting pattern. To do this, unfold the fabric and continue the drawing, building exactly half of the resulting figure.
8 Cut the workpiece, process the cut. The bottom and sides can simply be folded twice and stitched.
9 Cut out the belt: cut out a rectangle 8-10 cm wide and as long as needed for the ties and waist circumference.
10 Fold the workpiece in half. Place a strip of adhesive fabric inside and iron.
11 Sew one side of the waistband to the skirt using a basting stitch and stitch. Turn the free edges of the waistband inside out and stitch.
12 Then turn it right side out, iron it, and sew the other side with a blind stitch.
Long wrap skirt
For the simplest models you don’t even need a pattern. Using these instructions, you can sew a pilgrim skirt for visiting churches and holy places. A well-draped fabric is suitable for work. You will need a piece with a length of 1.5 or 1.75 hip circumferences, a width equal to the desired length of the skirt + 20 cm. You can sew from one piece or divide it into 3 parts: 1 back and 2 front.
Sequencing:
1 Cut out the fabric pieces.
2 Make darts or gather several folds when sewing on the belt.
3 Finish the edges and hem the bottom.
4 Sew on a belt with long ropes to tie a bow.
5 Make a slit in the front panel for the ties, and sew the hole with an overlock stitch or a buttonhole stitch.
6 If desired, decorate the finished product with fittings, pockets or ruffles.
A-line wrap skirt
A stunning model for a slim figure. It is advisable to choose a dense material or insert a lining so that the product has an even, straight shape. You can take a ready-made pattern and adjust it to the required dimensions.
Sequencing:
1 Draw a pattern on paper, add 1.5-2 cm to the seams on all sides, cut along the marked lines.
2 Using the resulting stencil, cut out parts from the material.
3 Do not cut the darts yet, just baste them with wide stitches, then attach the workpiece to the body. If the workpiece fits the figure, you can start processing the seams. If you want to shift or deepen it a little, you need to do this at this stage.
4 Next, work on the seams and finishing the edges.
5 In addition to the belt, you can sew on a hidden button so that the A-line skirt fits well on your figure.
Wrap skirt with yoke
This beautiful model with a wraparound front is suitable even for the office. The straight cut of a pencil skirt looks appropriate both during business negotiations and during shopping.
To create a pattern, you can use the basis for a straight cut model. For smell you will need to add 10-15 cm to the front parts. The additional blade in the drawing should reach approximately to the recess. This model should be narrowed at the bottom. It is enough to move the side seams just a couple of centimeters, no more, otherwise the smell will be revealed while walking.
How to sew a wrap skirt with a yoke with your own hands:
1 Construct a pattern on paper according to the required parameters.
2 Cut out blanks from the selected material.
3 Finish the edges, sew the undercuts, make the main seams.
4 The bottom edge of the yoke can be slightly rounded.
5 Sew the belt on top using the standard method. But in this model it will look good as ties in the front or on the side.
The skirt can be sewn without side seams. To do this, it is enough to build deeper grooves on the sides than in the front.
Boho wrap skirt
Boho-style skirts, which have become popular recently, are distinguished by their volume, natural materials, comfort, flowing, loose tailoring and ankle-length or floor-length. Such models are characterized by combinations of different materials and textures, the presence of decorative inserts, ethnic ornaments, and embroidery.
Boho is a universal outfit that will suit women of any age and body shape. One of the simplest ways to sew it is to choose a wrap pattern.
Step-by-step instruction:
- The width and length of the fabric cut for the skirt can be chosen arbitrarily. The more material is used, the more magnificent the product will be.
- You need to make 6 recesses: 2 rear, 2 front and 2 side.
- Double stitch the edges. You can sew on ruffles, lace, frills or other decorative elements. Additionally, you can decorate the front of the skirt with them.
- Sew a narrow belt into which insert a wide elastic band at the waist.
- Sew long ties to the belt.
Beginner seamstresses can also sew easy-to-sew wrap patterns.
Some models don’t even need patterns; all you need to do is take the measurements correctly and calculate the required amount of material.
Cutting details
Lay out the fabric on a flat surface, set aside all dimensions using a centimeter, not forgetting to add 5 centimeters from each edge, except for the top edge, where an increase of 1 centimeter is enough, since the belt will be sewn there. Draw cutting lines using chalk, pencil or dry soap. Carefully cut out the skirt panel.
Now you need to cut out the belt piece. Its width will be 13-14 centimeters, and its length will correspond to 3 waist sizes. If you do not have the opportunity to cut out a single piece for the belt, then you will have to cut it from two pieces that will need to be sewn together.
Who is it suitable for?
Opening any magazine, you will be surprised at how perfectly the images for the models are chosen. To look like “glossy beauties”, you need to select things that match your body type:
- For plump ladies, straight styles, sun and half-sun are ideal.
- For tall and thin people - trapezoidal style, tulip.
- The universal type is considered to be a straight cut with an angled hem.
Choosing items according to your figure
It is also worth paying attention to the presence of drapery, which can hide figure flaws and other finishes of the item.
Length
The “A-line” skirt (the pattern of the model is presented above) is good in any length. Thin, slender girls and women can afford any skirt length - in any version, the skirt will look great on such a figure. For women of average build and plus size, a length below the knee and a floor-length skirt is suitable.
Short
The mini skirt is suitable for girls, teenagers and young girls with beautiful slender legs and narrow hips. The “A” silhouette visually enlarges the hip area, and models with yokes, pleats, gathers at the waist or from the hip completely hide this deficiency.
For short A-line skirts, poplin, silk, chiffon, woolen or suit fabric, leather, and suede are recommended.
Midi
A midi skirt is a universal wardrobe item for any woman. This model does not cover the entire figure, which means it will not look too bulky on a fuller figure.
At the same time, the skirt fits tightly to the waist and, due to the flaring towards the bottom, hides the excess volume of the hips and legs. Well-chosen tops, shoes and accessories make the look very feminine and stylish.
Long
The long A-line skirt is a more festive, evening version of the product, which will add elegance, femininity and romanticism to the image.
This outfit is more suitable for tall women, as a floor-length skirt visually reduces height and increases the figure in the hips.
With buttons
An interesting idea in the design of the A-line skirt was the use of button closure. In this case, buttons are not only necessary accessories for fastening, but also an element of decorative finishing of the skirt. The button closure can be located on the front, side or back.
A modern print has become the use of large buttons of a contrasting color on mini skirts made of suit fabrics and, vice versa, small fittings in 1 or 2 rows in the main tone of the fabric.
Advantages of this model
The advantage of such models is that the skirt will help correct even the fullest and most uneven legs. Place emphasis on the hips, thereby visually emphasizing the advantages of the figure. Execution options
Today there are enough options for A-line skirts. Below are the main trends for 2021.
Product with a smell
This style will look great on plus size girls. It can be both short and long.
Using buttons
Buttons are very often used to decorate skirts or pants. They can be sewn on the front, side or back on different styles. Buttons look especially good on mini items.
Low rise
Since the 70s, skirts with a fit have become popular among the fair sex. But they are only suitable for thin girls.
High waist
This model is one of the most popular at the last moment. She looks good on any body type. Perfect for pregnant girls.
Sewn on a bias line
A product with a bias cut is the best option for sophisticated women. It is airy, graceful and looks great on the figure.
With elastic band
This product is often preferred by teenage girls. The style creates a playful and upbeat mood. This skirt is essential on a hot summer day.
With pleats
This skirt is not always straight. In recent years, the model with folds has been gaining popularity. It looks great on plus size women, hiding imperfections and volume. Basically, this skirt belongs to the office style.
This is interesting: Pattern Wrap Skirt Sizes 8-20 uk
Length selection
First, let's define the terminology. To do this, carefully study the diagram below.
For A-line skirts, the most common are mini, midi and maxi options.
A mini skirt that reveals your legs requires a slim physique.
Midi length suits most female body types. The A-silhouette, which makes curvy hips appear slimmer, allows you to visually elongate your figure.
Maxi length suits almost all women. For example, an evening long dress with an A-silhouette skirt will always be very feminine and elegant. The pattern of a dress with this version of the skirt should have a laconic bodice, not overloaded with bulky details. Also, long skirts made of light, airy fabrics are an ideal choice for a summer walk.
Let's take a closer look at how the most common types of A-line skirts are made.
Popular models of A-line skirts
With smell
Suitable not only for slim, but also for overweight women. This skirt can be made both in a business style and for everyday wear.
Pleated
A feminine and romantic version of the trapezoid. By varying the type of folds, you can correct figure flaws. A medium-length skirt with pleats is a classic version of a business suit in Moscow and other European cities.
With elastic band
A wonderful summer option for a skirt. Most often it is sewn from thin, breathable fabrics. The elasticated skirt is very comfortable and fits almost any body type. In addition, sewing it with your own hands is very simple.
With buttons
The placement of the buttons determines the style of the skirt. From strict school uniform style to loose.
