How to properly put glands on a jumpsuit

What does a jumpsuit strap buckle look like?

Buckles are different.
They can be very simple and look like two metal rectangles, or they can be plastic with special push fasteners - this design, at first glance, is somewhat more complicated. The most common and simple buckle for fixing straps consists of two parts and is usually made of metal . The first part is a rectangle with a transverse bar (clamp), and a holder with a loop, with which the strap is fastened to the chest.

Important! An ordinary button will not work when attaching the strap this way. You need to take a metal one with a “leg”. It is better to install these by specialists.

However, you can do without buttons. All you need to do is buy a fastener and insert the straps into it. You can adjust the length in this case too.

How to make straps with fasteners on overalls with your own hands

There are cases when the straps on the overalls are not provided, and therefore you need to make them yourself.

You need to sew the straps to the back and then either thread them into the fasteners or make holes for the buttons. Many people, when wearing overalls, find that the straps fall off their shoulders, and this causes some inconvenience. Therefore, it is better to make their length adjustable.

Delicious recipe! Chicken breast broth in a slow cooker

But you can also make a simple strap with a hole for a button. To do this, calculate the required length so that the straps do not fall off your shoulders while wearing.

The straps are very comfortable for children . So, a jumpsuit with straps is easy to put on a child. They can also be adjustable, and thanks to this it will be comfortable not only for the baby, but also for his parents, since you can extend the life of the overalls by increasing their length according to the baby’s height.

Make straps on denim overalls

If you want to make your own denim overalls but don't know how to make the straps the right way, it's not difficult at all. You can choose the length of the straps and their width yourself, as you like.

Stages of work:

From the bottom of the future strap we make an oblique cut. In the upper part, do not forget to make a slot for a button, which depends on its size.
Sew along the edges, leaving a bias cut.
Turn it right side out, iron it, and cut off the corners.
We wash and stitch (you can use 1 line, it’s at your discretion).
Sew the strap to the back. To do this, we apply the straps to its upper part with the front side inward, cut to cut.
Sew the edge, leaving the bottom untouched.
We cut off the corners, turn them inside out, iron them and sew them on.

If you plan to make an adjustable fastener, then you do not need to make a hole for the button. It will be necessary to thread the straps into a special buckle.

How to properly insert straps into fasteners

There are different types of clothes fasteners. Each of them is threaded and secured differently. For example, there are ordinary fasteners , and there are those that need to be sewn and adjusted, like on the belt of baby strollers. Let's talk about the first type.

There is nothing complicated here. The main thing is to understand the principle. You need two parts: a metal rectangle with an iron fastener in the middle - this is the part that is usually located in the middle of the strap and what clings to the button. First, take the first part (rectangle) and thread the strap into it. To do this, thread it so that the fastener in the middle is visible from the inside of the strip of fabric, and the edges are visible from the outside. It is advisable to move this rectangle further away, because it will be necessary to attach the remaining part. We complete the fastening.

Delicious recipe! Recipe for buns with boiled condensed milk in the oven

If you thread the second part so that its end is on the inside of the strap, then during subsequent steps it will be inside the loop, which will be made for tightening.

Where the first part is located, release the strap a little. We thread the free end inside the fastener, moving the latch in the middle to the side. After this, you need to pull out the strap again, move the latch again and try to thread this tail in the same way on the other side. All that remains is to fasten the strap, and in the end you will be able to fix the desired length.

How to tuck the straps into the buckles?

Of course, the straps need to be inserted so that they can be freely adjusted later, but so that they also hold on. Only at first glance does it seem difficult. But it's easy enough to understand the principle. All these fasteners are actually very similar.

Let's look at the simplest way:

We pull the strap into the fastener from bottom to top with the front side out.
Then we insert it into the second hole and pull it down. It turns out that the fabric seems to go around the jumper of the retainer, and its “frame” remains on the fabric.
Next, we insert the same end of the strap into the loop of the fastener from above, then we insert the strap back into the fastener under the previously threaded strip of fabric.
It is better to fold the end of the strap twice and stitch it.

How to make adjustable straps: master class

Adjustable straps often make the item much more comfortable. They are not difficult to complete. The most delicate point here is to select the desired width of the strap so that it matches the width of the rings and buckles for adjustment.

Here's how to make adjustable straps on a knit top that you sew from scratch. Initially, the T-shirt was supposed to have regular thin straps. To make them adjustable, the length of the straps must be changed. Using the same principle, you can shorten and make adjustable too long straps on a finished T-shirt/top (you just need to take into account that the processing will “take away” at least 3-5 cm from the length of the straps).

3 ways to create the perfect armhole in sleeveless knitwear

You will need:

— a T-shirt and (if necessary) material for the straps;

— 2 rings and 2 buckles of the required size;

- if you sew from knitwear - a needle for knitwear;

- needle for hand sewing;

- sewing machine and thread.

How to make a T-shirt from a T-shirt in 20 minutes: 3 easy ways

When choosing accessories, make sure that the width of the rings and buckles is equal to the width of the future straps. When cutting out the straps, add a few centimeters to their length (at least 5 cm or more, depending on how much you plan to lengthen the straps when adjusting). Sew and sew the straps as your model suggests, but do not close them into a ring: the back section of the strap should extend 2.5 cm.

Place the rings on the remaining sections of the straps, turn the straps on the wrong side and sew with a zigzag stitch.

Place the buckles on the straps so that the middle bar of the buckle is on the inside of the strap. Thread the end of the strap into the ring, as shown in the photo, repeat with the second strap.

Loosen the loop on the buckle. Now the free tip of the strap needs to be threaded under the middle crossbar of the buckle - it’s easier to do this by helping yourself with a needle. Form a loop from the end of the strap around the middle bar of the buckle and sew the end, securing the loop, using a zigzag machine or by hand. Ready. Repeat with the second strap.

How to secure them?

When stitched, the edge is quite thick. This means it won’t just fall out of our clamp, and everything will look neat. To prevent the fastener from dangling in such a large loop that we have on top, it can also be secured with a finishing stitch . You can also sew the protruding end of the strap in the same way.

But it is easier
to secure the fabric with a special plastic buckle . It usually has three holes. The central one is several times wider than the two outer ones. To prevent the fabric from moving, you need to thread it first through the large central hole, and then into one of the narrow ones. Then - again into a wide one, and then into another narrow one. With this method of fastening, the strap will grip tightly and will not come loose .
All these methods are well suited for sewing overalls yourself (with installing fasteners on it “inside and out”) and for adjusting a ready-made model to the desired height.

How to make straps with fasteners on a suit with your own hands

There are cases when the straps on the suit are not taken into account, and therefore they must be made with your own hands.

It is necessary to sew the straps to the back and then either thread them into the fasteners or make holes for the buttons. Many people, when wearing a suit, find that the straps fall off their shoulders, and this causes some inconvenience. Therefore, it is better to make their length adjustable.

But it is quite possible to make a regular strap with a hole for a button. To do this, calculate the required length so that the straps do not fall off your shoulders while wearing.

The straps are comfortable enough for children . So, a suit with straps is easy to put on a child. They are also adjustable, and because of this it will be convenient not only for the child, but also for his parents, since you can increase the working life of the suit by making their length longer according to the child’s height.

Make straps on a denim suit

If you want to sew a denim suit on your own, but don’t know how to make the straps correctly, then it’s very easy. You can choose the length of the straps and their width yourself, the one you like.

Working steps:

From the bottom of the future strap we make an oblique cut. Don’t forget to make a slot on top for a button, which depends on its size.
Sew along the edges, leaving an oblique cut.
Turn it right side out, iron it, and cut off the corners.
We wash and stitch (you can use 1 line, this is according to your desire).
Sew the strap to the back. To do this, we apply the straps to the top part of it with the front side in the middle, cut to cut.
Sew the edge, leaving the bottom untouched.
We cut off the corners, turn them inside out, iron them and sew them on.

How to open a Pandora bracelet Types of locks in a Pandora bracelet

If you intend to make an adjustable fastener, then you should not make a hole for the button. You will need to thread the straps into a specialized buckle.

How to properly insert straps into fasteners

There are different options for clothes fasteners. Each of them is threaded and attached differently. For example, there are traditional fasteners , and there are those that need to be sewn and adjusted, like on the belt of strollers for children. Let's talk about the first type.

There is practically nothing complicated here. The main thing is to understand the principle. You need two parts: a metal rectangle with a metal fastener in the middle - this is the part that is usually located in the middle of the strap and what clings to the button. First of all, take the first part (rectangle) and thread the strap into it. To do this, thread it so that the fastener in the middle is visible from the inside of the fabric strips, and the edges are visible from the outside. It would be a good idea to move this rectangle further, since the missing part will still need to be secured. We finish the fastening.

If you thread the second part so that its end is from the inside of the strap, then during further actions it will be in the middle of the loop, which will be made for tightening.

Where the first part is located, slightly release the strap. We thread the free end into the middle of the fastener, moving the latch in the middle to the side. After this, you need to remove the strap again, move the latch again and try to thread this tail in exactly the same way on the other side. All that remains is to fix the strap, and in the end you will be able to fix the required length.

How to make the fasteners on the straps adjustable

In order for the straps to be adjustable, you need to purchase special fasteners that perform a similar function.

In most cases, this is an iron fastener, which consists of two parts: a latch, due to which they will be changed, and a holder, thanks to which the strap is fastened. The button attached to such a fastener is usually not sewn on, but is fixed on special equipment. You may need to contact customer service to have the buttons inserted.

How to install a plastic window sill yourself, installing a wooden window sill

If you do not want to put a lot of effort into making the fastener adjustable, then you can do without buttons: it will be enough to just buy a fastener and insert the strap into it.

As you can see: in some cases it is easy to attach it to a suit, but in others it requires more effort. However, the result is worth it: the item will become more comfortable to wear.

LiveInternetLiveInternet

—Tags

—Categories

video lessons (794)
Crochet (4413)
mittens (1)
video-mk (371)
knitted applique (37)
Bosnian knitting (7)
knitting broomstick (2)
knitting for home (64)
needle knitting (Scandinavia) (2)
fork knitting, Tenerife (13)
knitting with beads (43)
knitting with fur (31)
knitting Solomon's knot (1)
Tunisian knitting (137)
loin knitting (143)
freeform knitting (28)
knitted items, border (144)
knitted napkins (94)
knitted flowers, butterflies (288)
children's (282)
for women (211)
for men (16)
jacquard, intarsia (52)
toys, snowflakes (618)
for Easter, Christmas (8)
books, magazines (123)
Bruges lace (36)
needle lace, Romanian lace (124)
lace ireland (385)
ribbon lace (47)
Turkish lace (40)
swimwear (68)
socks, ankle boots, slippers, (171)
nuking (8)
gloves, mittens (23)
dress, tunic (138)
Osinka website (5)
website season (1)
links, sites (55)
crochet patterns (742)
crochet lessons (544)
hats, berets (164)
scarves, shawls, stoles (38)
skirt (54)
Knitting (19927)
mittens, gloves (437)
video-mk (643)
knitted applique (1)
knitting for home (56)
knitting with beads (27)
knitting with fur (10)
Knitting (3902)
knitted flowers, butterflies (114)
knitted items, napkins (101)
children's (1977)
for women (4841)
for men (425)
for dogs (4)
jacquard, intarsia, enterlac (1877)
toys, snowflakes (237)
for Easter, Christmas (6)
books, magazines (559)
swimwear (72)
mohair (33)
socks, ankle boots, slippers (1748)
dress, tunic (1194)
Osinka website (15)
website season (1)
sites, links (107)
knitting patterns (2417)
knitting lessons (1688)
hats, berets (1196)
scarves, shirtfronts, shawls, stoles (1696)
Shetland (10)
skirts (300)
For the mind and heart (6)
Health and beauty (50)
books, magazines (164)
computer (57)
kitchen (257)
Handicrafts (8529)
accessories (19)
applique (114)
batik (6)
beads (1200)
video-mk (188)
embroidery (1142)
bargello embroidery, Swedish (stitches) (32)
bead embroidery (129)
blackwork embroidery (21)
satin stitch embroidery, Japanese embroidery, Moroccan embroidery (309)
crochet embroidery (56)
ribbon embroidery (697)
3D embroidery, rubber (110)
embroidery on knitwear (61)
cutwork embroidery, guipure, hemstitch, hardanger (137)
soutache embroidery (15)
Jacobin embroidery (kruil) (17)
knitted (452)
decoupage (58)
for home (384)
Stitched toys (90)
ideas for inspiration (4)
isothread (3)
books, magazines (637)
boxes, cases (546)
patchwork, quilt (1180)
macrame (28)
Easter,Christmas (198)
newspaper weaving (292)
buttons (50)
Working with leather and fur (217)
sites, links (58)
chenille (38)
stitch (77)
bags (546)
weaving (4)
packaging, cards (107)
porcelain, foamiran (42)
tatting (37)
Fabric flowers (1163)
shibori (3)
sewing (76)
gold embroidery (20)
DIY (114)
sewing (3742)
accessories (16)
trousers (36)
video-mk (187)
patterns (652)
patterns (schemes) (597)
children's (229)
for men (6)
books, magazines (90)
presser feet, accessories, sewing machine (104)
little things (17)
fur (27)
modeling (50)
underwear (16)
coat, jacket (64)
dress, tunic, blouse (340)
bed linen, curtains (23)
leather work (2)
clothing repair, alterations (91)
Osinka website (16)
website season (48)
sites, links (51)
slippers, boots (172)
equipment, sewing technology (1075)
knitwear (20)
hats, berets, shawls, stoles (63)
skirts (582)
skirt modeling (33)

Supatnaya fastener in overalls with a zipper

Jumpsuits are truly the most versatile clothing - the same model can easily be transformed from a business to a sports option , just by changing shoes for sneakers or sneakers. A convenient zipper can become an elegant detail if you “hide” it under the placket.

To perform a supata fastener, you will need a zipper and a practically sewn jumpsuit; the collar and lapels are made after the fastening.

The half-skid in our example is 3 cm. We straighten the sides, cut out the edges and duplicate them with glue. We mark the bend line of both lapels and the middle of the front, on it we mark the upper and lower boundaries of the zipper stitching.

Execution of the left (lower) side of the overalls

Open the zipper, combine the braid with the cut of the left side, pin it and stitch it using a one-sided foot.

We combine the sections of the bead and the edging and sweep them away - the zipper braid is located between the bead and the edging. Pull the tail of the zipper without teeth to the wrong side.

We sew the side with the edge.

Iron and sweep the side.

Execution of the right (upper) side of the overalls

We combine the right side with the edge, grinding down the long sections. Please note - the bottom of the side is figured, turning into a codpiece.

We sweep and iron the seam.

For the convenience of further processing, we grind both halves of the front along the bow, but not all the way! After the shaped edge of the codpiece is completed, it will be possible to stitch up the unstitched area.

We align the left and right sides along the middle line and mark the line of the right zipper band. Use pins to pin the zipper along its entire length.

We baste and then sew the zipper to the hem with a one-sided presser foot.

Finishing sewing in the zipper

After we sew in the collar and the edges of the lapels, we sew off the sides.

The article was prepared as part of the competition My Romance with the Season. Thanks to the author AngelA for MK

Children's overalls: choice of materials

The color of the fabric should be contrasting or different from the front fabric by several tones.

To calculate the amount of fabric needed, first draw a pattern and then lay it out on a flat surface, taking into account the number of pieces and the required seam allowances. Measure the resulting space.

In addition to fabric, you will need accessories to adjust the straps of the overalls. We used a set of a frame with a constriction and a simple frame of the same width for each strap. Another option is with buttons. Make loops on the top of the overalls, and sew buttons on the straps at the required height. In this case, the straps need to be sewn with a length reserve of 5-7 cm. You can also buy special fasteners for overalls, both plastic and metal.

To finish the pocket, we sewed a large button to its lapel. Such a pocket can also be decorated with embroidery or appliqué.

So, let's sew baby onesies with our own hands!

Constructing a pattern

We will tell you how to make a jumpsuit pattern with your own hands, using ready-made trousers or shorts of a suitable size. Prepare a pencil, ruler and scissors, as well as a large sheet of paper. It is most convenient to draw a pattern on graph paper, which is sold both cut into sheets and in rolls. You can also glue together several sheets of plain paper, take newspaper or scraps from a roll of wallpaper.

Fold the sample in half, placing one pant leg inside the other. Unfold the crotch seam. Trace the outline of the sample on paper: the crotch line, the top and the beginning of the side seams. Repeat on the other side of the sheet, straightening the back crotch.

Set aside the required length of the overalls legs from the top line and the desired width from the side seam line. Make the width free by adding about 2 cm to the circumference of the waist and hips.

From the center of the front waistline, draw a vertical upward, its length equal to the desired length of the top. Set aside half the width of the top part to the right; it should be 2-3 cm less than the width of the chest (the distance between the beginning of the armpits). Draw a smooth side line of the top part, ending it 3 cm above the waist line.

On the back half of the legs, draw the same vertical line, and then draw the back upper part of the overalls, narrower than the front. The beveled diagonals are equal to the width of the straps, on average 3.5-4 cm.

Cut the top of the overalls from the legs.

Draw the desired outline of the pocket on the front half. Transfer it to a separate sheet of paper and draw the top flap as shown in the diagram. The height of the lapel is half the height of the pocket itself.

How to wear a jumpsuit in style: 20 comfortable and stunning options

An important positive side of the jumpsuit is that there is no need to select the top or bottom of the wardrobe, everything is connected together. At first, overalls were made in America for pilots as a uniform. Then women with children liked this form of clothing. Stores began selling overalls for boys. After some time, they appeared in the wardrobes of women and girls.

Jumpsuit can be worn anywhere

You can wear it for a walk, in the office, on a date, even to a celebration. For every occasion, you can choose a stylish option.

For example, a denim jumpsuit can be worn for a walk or to go shopping in it.

Gigi Hadid

A red jumpsuit with trousers made in a classic style can be purchased for dinner at a restaurant.

Complete the ensemble with high-heeled stilettos and stylish jewelry.

How to wear a jumpsuit correctly:

— Choose a jumpsuit model that is sized so that it does not hang on your figure or cut into your body.

— If a girl has wide shoulders and narrow hips, then it is better to wear a strapless jumpsuit with wide trousers. A belt will help accentuate the waist.
— Women with large figures should purchase the option with wide trousers.
— When it’s cool outside, the overalls are complemented with a cardigan, midi-coat, trench coat, but you don’t need to button up such wardrobe items.

— For the evening, choose the option with a low back neckline.
— To create an emphasis on the waist, you need to gird yourself.

Photo by David M. Benett on Getty Images Read also: boho style for the bold and romantic, chic summer looks for women.

With stylish outerwear

A jumpsuit is a great option for a cool-weather look. You can simply throw your favorite jacket, raincoat or coat over your shoulders - voila, a chic, warm outfit is ready!

Workwear is the face or business card of any company. Corporate clothing (work clothes) always creates the first impression of a given enterprise, and is also an indicator of the attitude of owners and managers towards their workers. After all, everyone knows that high-quality and comfortable workwear increases labor productivity and makes the work of your employees safe and comfortable.

When choosing work clothing in Saratov, it is necessary to take into account the individual nature of the impacts in the workplace (chemical industry, food industry, metallurgical industry, medicine, security, etc.).

All work clothes from the online store " Profstil Workwear Saratov"

» tested for compliance with state quality standards and has all the necessary certificates.

What not to do

To look luxurious in a jumpsuit, you should follow some rules:

— a model with narrow trousers should not be worn with flat-soled shoes;
- do not add anything unnecessary to the “ensemble” so that the image does not turn out to be multi-layered (overloaded);

— the drawing, if any, should not be large;
— accessories can be in the same tone as the overalls.

Suitable for the event

The main thing is not to forget that the model must correspond to the event you are going to.

If the jumpsuit is made in a loose style (laces, fringe), long sleeves, a rough model, then it will fit into an everyday wardrobe.

And when going out in the evening, for example, going to a restaurant, a plain jumpsuit is worn, which can be complemented with large jewelry.
Accessories can be added to a monochromatic outfit without fear of ruining it. Frame Fall 2017 Ready collection