DIY garter belt: pattern, sewing instructions art-textil.ru

Stockings for every woman are a unique opportunity to feel like a real lady. At first, the purpose of the belt was to support the stockings. But over time, they began to make stockings with a silicone base, which fits perfectly on the leg. Belts now, fulfilling the task of holding stockings, have the additional function of decorating the female body. It is not necessary to buy an important attribute. If you want to emphasize your femininity and surprise your loved one, we offer you a tip on making a belt with your own hands.

Pattern of a belt holder for stockings

To construct a drawing of a belt holder, the following measurements are given: length of the belt.
20 cm semi-circumference of the hips. 46" waist semi-circumference. 36 "Draw a rectangle ABVG (Fig. 60, a), the length of which is equal to the length of the belt, that is, 20 cm, and the width is equal to the semicircle of the hips, that is, 46 cm. The width of the back half of the belt along the waist line is equal to 1/2 of the semicircle of the waist plus 4 cm, that is: 36:2 + 4 = 22 cm. The width of the front half along the hip line is equal to 1/2 of the semicircle of the waist minus 4 cm, that is: 36:2 - 4 = 14 cm.

We draw the side line of the front and back halves. We deepen the middle of the front half 3 cm from point A down, and the back half 4 cm from point B down and draw the waist line by hand. “Legs” for elastic bands are cut out in both halves of the belt. For this purpose, from point G to the right we set aside 0.1 of the hip semicircle, that is 46X0.1 = 4.6 cm, or rounded 5 cm. The width of the front half along the hip line is equal to 1/2 of the waist semicircle, that is 36:2 = 18 cm. To draw the “legs” of the back half, set aside 9 cm from the side line. The width of the “legs” at the bottom is 4 - 5 cm or the width of the elastic sewn into the belt. The length of the “legs” is 10 cm. From point B, we put 4 cm up and draw the bottom of the belt by hand. The fastener is made on the left side on the front half of the belt. Add 2 cm to the fastener on both sides for buttons (see dotted line). A drawing of a belt holder can be constructed based on a drawing of a two-seam skirt (Fig. 60, b). For strength, a strip of fabric is sewn along the waist line of the holder belt with a fine stitch.

How to choose stockings for a belt

To choose the correct belt size, it is recommended to take measurements: hip and waist circumference. Refer to the size table for the resulting volumes. The sizes always match the panty sizes.

To prevent the skin on the leg from hanging down and spoiling the aesthetics of the figure, the size of the stockings must be selected carefully . It is marked with numbers from 1 to 6 or with the letters S, M, L, XL.

Along the length of the leg, from the heel, it is marked with numbers from 8.5 to 13.

The elastic bands, to which clip-fasteners are sewn at the ends, should be tight and not stretch too much . Otherwise, they will soon lose their shape.

DIY garter belt

Stockings for every woman are a unique opportunity to feel like a real lady.
At first, the purpose of the belt was to support the stockings. But over time, they began to make stockings with a silicone base, which fits perfectly on the leg. Belts now, fulfilling the task of holding stockings, have the additional function of decorating the female body. It is not necessary to buy an important attribute. If you want to emphasize your femininity and surprise your loved one, we offer you a tip on making a belt with your own hands.

How to choose a belt and stockings

Give preference to stockings made of natural silk and a belt with metal fasteners and strong garters. Of course, such stockings and a belt will cost more than other models, but they will delight you with their beauty and reliability.

Please note that the length of the stockings should ideally correspond to the belt: stockings that are too long will sag, and stockings that are too short will press. In addition, if the belt suspenders are stretched to the limit, they will begin to dig into the leg, and the fastener may not hold up and tear, damaging the stocking itself.

Next, you should choose thongs and stockings that match the color and shape of the belt. It’s great if the belt and stockings are in harmony in tone, texture and decoration with each other. Any stockings and belt, including fishnet ones, will look good on slender legs. For plus-size girls, the best choice would be neat belts and panties, as well as plain stockings or stockings with vertical patterns and small designs.

Source

Constructing a pattern

To obtain a high-quality result, it is necessary not only to prepare all the necessary materials. It is important that the product exactly matches the parameters of its owner.

Taking measurements

When sewing a garter belt, pay special attention to taking measurements. This will determine how correctly the accessory will be sewn.

It is necessary to take measurements in the very morning, because after that your legs begin to swell a little.

In order to correctly determine the size of the product, you will need to take two measurements.

Body circumference along the hip line : measure along the most protruding part.
Body circumference at the waist : measured at the narrowest point.

How to build a pattern drawing

We invite you to familiarize yourself with the approximate construction of the pattern drawing. With its help you can make calculations for your own parameters.

The length of our product is 20 cm, the hips are 90 cm and the waist is 70 cm. On the sheet we draw a rectangle 20 cm long and 45 cm wide. The width of one side (front or back) is equal to the half waist circumference, to which we add another 4 cm.

Keep in mind that there will still be elastic sewn into the belt. To make it a little stronger, you can stitch a strip of fabric from the wrong side.

How to wear stockings with a belt?

And now, finally, the time has come to try on the belt. You will find out immediately whether your choice was correct:

Figure out which side the clasp is on - it should be at the back.
Wear the belt so that it fits around your waist.
Fasten the hooks.
Analyze your feelings - what you are wearing should not put pressure.

Important! Try to turn the belt - it should not turn over: if it can be easily moved, it means it is too wide for you. However, most modern belts have adjustable width, and the loops are sewn in three rows.

Sewing a belt

Simple option

We offer you a description of how to make a guipure garter belt. This will take you a little time. And even a novice needlewoman can cope with such a task.

Making a garter belt pattern is quite simple. You don't even have to draw paper templates. To make a beautiful belt we will need 11*8 cm guipure . The canvas is cut in half diagonally. The result should be two triangles. After that, we sew them into one large triangle along the largest side. We need two such blanks.

For the belt, it is better to choose guipure, which stretches very well, and make two blanks, as written above.
Sew the blanks together, making sure that the corners match as much as possible.
After this we sew on the elastic band.
Next, we begin to make loops and fasteners to which the ribbons will be attached. You can buy such hooks at any craft store. Another option is to remove old underwear.
After this, try on the belt to make sure it fits well. If necessary, close it down a little.
We sew on four hooks, and the belt can be used for its intended purpose.

Practical model

If you want to make a belt not for decoration, but a more practical one that will hold your stockings well, then there are several recommendations for you.

In this case, a pattern is required. Therefore, you need to make belts on paper.
Cut out the paper blank.
Transfer the drawing to dense material. In this case, guipure alone will not do. The belt is sewn from two parts - the lining and the guipure that will be on top of the belt.
First you need to sweep away all the blanks, and then stitch them on a typewriter.
As in the first option, we sew on elastic bands and attach fasteners to them.

This completes the process of making a garter belt. If desired, it can be decorated with satin bows or decorative elements.

Now you can definitely make a belt for your new lace underwear with your own hands and surprise your loved one. This will take you a little time. But if you were already interested in the cost of the belt, then you can confirm that your needlework will significantly save the family budget.

DIY garter belt: Review - Instructions + Video

A garter belt is a piquant component of a woman's wardrobe, adding sexuality to a woman's look.
It is an elastic fabric tape with different fit options at the waist and hips. Not every female figure is ideal, so the belt is a little “secret” for girls in order to hide existing flaws in their build and emphasize their individuality and attractiveness. The garter belt is a beautiful boudoir item from the mid-twentieth century that has passed into the modern woman's wardrobe largely as a fetish. Although it is known that an analogue of such a belt existed back in the Middle Ages, and then this accessory was popular not only among women, but also among men!

At that time, they wore non-elastic stockings made of linen fabric (shossa), which had to be tied to the belt, since they did not stay on the body on their own.

Over time, production improved, stockings became thinner and more transparent, and different colors appeared. The cost of the product gradually decreased and the accessory became available to a wide range of buyers. In the sixties of the same century, lycra appeared. Stockings made from this material became smoother and tighter and became even more popular. But at the same time, women's tights appeared on sale.

This item of women's wardrobe quickly began to occupy a leading position among customers and stockings gradually began to fade into the background. The modern market offers a huge selection of hosiery products. They differ in materials and prints. Each woman herself chooses a priority between stockings and tights, but it is worth noting that stockings are less subject to wear, are not noticeable under any clothing, increase a woman’s self-esteem, and give her image a sexy look. Well, of course, because a woman in stockings remains one of the main male fantasies.

Today, garter belts are an exclusively female attribute. It looks perfect on any figure and makes its owner sexy.

Video

Previously, stockings were an invariable women's accessory, but today they have been replaced by tights, becoming more popular and comfortable clothing. Despite this, stockings still remain a symbol of femininity, and therefore this accessory should not be ignored.

Today there are at least two types of stockings: the first are attached using elastic adhesive silicone tapes and do not require wearing a belt. They have both an advantage - they are invisible under tight-fitting clothes, and a disadvantage - these stockings are not very reliable, because the adhesive tape cannot always hold them at the proper height, and the stockings fall down a little, becoming unstuck.

In addition, stockings are divided according to the number of ribbons - garters, which should hold them. There can be 4 or 6 of them - a larger number is simply inconvenient in everyday life, since the time required to fasten the garters will be greater. Some believe that the more garters, the more securely the stockings will hold. This is true, but even with four ribbons the stockings will not fall off unless the fasteners break.

And one more important point - the material from which the stockings and belt are sewn must be durable and of high quality. It is better to opt for silk stockings - they are thin, pleasant to the body, but quite strong. Belts for everyday wear should not be lace if they are intended to be worn under tight-fitting clothing. Common materials for belts are lace, vinyl, mesh and leather.

The second type of stockings are classic ones, which are attached with a belt. Anyone who encounters this set for the first time may have a lot of questions: for example, how to attach a garter belt, because these metal fasteners have a strange shape and the fastening technology cannot be immediately figured out. In fact, it is very simple, and then we will explain step by step how to fasten stockings to a belt.

Instructions - how to fasten a belt to stockings?

So, we need to learn how to put on a garter belt. To do this, we need to put on both stockings and a belt correctly.

How is the garter belt attached?

How to attach stockings to a belt?

What is the name of a garter belt?

A garter belt is called a “garter belt.” To make wearing this belt comfortable, at the end you need to adjust the length of the garters - ribbons with clothespins. To do this, you need to put your foot on a chair and adjust the most comfortable length of the back and front bands.

Stockings with wide silicone elastic bands have long been firmly established in the wardrobe of modern women. This piece of underwear gives women a special femininity and sexuality, especially in the eyes of men, and visually makes their legs more slender and attractive. But stockings look especially piquant with a special belt, which has recently been rarely used by women in everyday life, and most often only as an attribute of erotic games. But they forgot about the garter belt not entirely deservedly, and if you know how to put it on correctly, and also know what clothes and how to wear the garter belt, then it can very well become part of your daily wardrobe. Moreover, by wearing this beautiful and erotic part of the wardrobe, the woman herself will feel more feminine and sexy, and this is important, because first of all you need to be beautiful for yourself, and not just for others.

Do it yourself

The easiest way to become the owner of a classic “linen” accessory is, of course, to buy it. The cost of belts varies widely and, according to most women, is overpriced for such a small product.

When purchasing a belt, you need to pay attention to some nuances:

- the material from which it is made - it is desirable that it be elastic and pleasant to the body. The most common ones are satin, lace, mesh and leather.
- the number of garters - is selected based on the intended functions of use (in most cases, their number ranges from four to twelve) - the greater the number of garters, the more comfortable the belt will feel on the body when worn, but it will take more time to remove it;
- width of the belt - the thinner the belt, the more discomfort it will cause a woman when wearing;
— fittings material — metal and plastic clips are common, the difference between which lies in their reliability and durability.

There are no specific rules for wearing stockings. It can be worn both at the waist and on the hips, the main thing is that it fits tightly enough and follows the curves of the female body. In order for the belt to fit tightly to the body and not slip, you need to use elastic bands or rubber fabric along with the main fabric.

Important! To attach to the belt, you need special stockings (without silicone lines).

How to fasten a belt to stockings? It is necessary to place the round part of the garter clip under the inside of the stocking (2-3 cm from its edge), and put a rubber fastener on top of the stocking, forming a lock. Now you need to adjust the length of the garters - they should not be too tight (because a sudden movement can tear the stocking), but they should not hang either (the aesthetics and sexuality of the image are lost).

An alternative purchase option would be to make the belt yourself.

We’ll talk further about how to sew a garter belt:

First you need to decide what material the accessory will be made from. This is important, since the fabric should not cause discomfort and cause unpleasant sensations on the body. For everyday wear, stockings made from stretch fabrics are preferred, for sensual special occasions - silk and lace. It is important that a large amount of fabric for sewing a belt is not required (approximately 30-40 cm of the standard width of a fabric roll).
It is necessary to make a pattern for the future product. To speed up the process, the pattern can be found on the Internet. We must remember that the pattern is made strictly according to specific measurements (waist and hip circumference), therefore, when using a ready-made version of the pattern, do not forget to adjust it to your size!
Cut the fabric based on the existing pattern, be sure to leave a few centimeters for allowances.
Then the sewing begins. There are many master classes on this topic on the Internet; there are also detailed descriptions of the process with attached photos and video materials.

In this article we consider only the main points that are worth paying attention to:

— for a more comfortable feeling, it is recommended to add a lining to the belt (it is made using the same patterns as the main product);
— in order for the belt to fit more tightly to the body, it is advisable to sew an elastic band on the back side; this will add not only functionality to the product, but also a piquancy to its appearance.
— an important component of a belt is the fittings used to sew it. Currently, there are many online stores offering a large selection of accessories for women's underwear.

By making a garter belt with your own hands, you can not only save a lot of money, but also create an absolutely unique and unique piece of clothing that is right for you. The main thing is not to limit your imagination.

Results

In this article we consider only the main points that are worth paying attention to:

— for a more comfortable feeling, it is recommended to add a lining to the belt (it is made using the same patterns as the main product);
— in order for the belt to fit more tightly to the body, it is advisable to sew an elastic band on the back side; this will add not only functionality to the product, but also a piquancy to its appearance.
— an important component of a belt is the fittings used to sew it. Currently, there are many online stores offering a large selection of accessories for women's underwear.

DIY garter belt

Share on social media networks:

Stockings have always been a fetish for men, and for women - a reason to feel incredibly sexy. Of course, they can be worn separately, but a special holder with clips will help to add more effect and secure the stockings on the leg. You can buy ready-made supports for stockings, but why spend so much money when it is possible to create this accessory the way you want it. If you want to make your own garter belt, then you've come to the right place. Let's start sewing such a delicate item!

DIY stocking fasteners

If you love your body and want to pleasantly surprise your boyfriend, then you simply need to have such a sexy product in your wardrobe. Let's look at a detailed tutorial on how to sew a garter belt at home.

So, for work we need to prepare the following:

Elastic lace (if you don’t have one, you can use any).
Elastic fabric.
Linen elastic.

We chose the fastest way to create a pattern, which is very easy to do without cutting out various parts from paper. Take a strip of lace measuring 10 by 7 cm and cut it diagonally into two equal parts. We got two identical triangles. We sew them along the longest side into one large triangle. Using the same scheme, we make a second triangle exactly the same.
We take elastic fabric in our hands and draw a rectangle on it, where one length of the top will be 13 cm, the bottom will be 20 cm and the width (height) will be 6 cm. We should get a rectangle with one oblique angle. Cut out the resulting parts.
We sew openwork triangles to the fabric pieces. Make sure that the corners of the parts coincide with each other.
We attach decorative elastic to the belt in the following places: along the top of all parts (hip coverage), at the very bottom of the inverted lace triangles.
On one side of the belt we sew a small loop (you can use a thin elastic band), and on the other - a small button. You can use a clasp from an old swimsuit or bra.
We adjust the belt to fit the waist, sew four silicone clips to the ends of the hanging elastic bands.

The product is ready! Enjoy your new creation!

DIY garter belt - pattern with dimensions

Of course, any clothes can be sewn without ready-made sizes, but according to your own measurements or, as they say, “by eye.” We bring to your attention a step-by-step description of constructing a pattern for a garter belt with measurements of all the necessary details for sewing.

Important! We make all parts according to standard measurements. Our belt will be 20 cm long, half hip circumference – 46 cm and half waist circumference – 36 cm.

Here's what to do:

On paper we draw a rectangle of exactly the same length as the length of the belt - 20 cm and a width of 46 cm (semicircle of the hips).
The width of one part of the pendant along the waist line is equal to half the waist circumference plus 4 cm. We got the following picture: 36: 2 + 4 (allowance) = 22 cm.
The width of one front half, already along the hip line, is equal to half the waist circumference and minus 4 cm. We carry out the calculations: 36: 2 – 4 = 14 cm.
Now we draw one side line on the front and back of the halves of our future belt. We deepen the middle of the front part by 3 cm from the top of one corner to the bottom, and the back part by 4 cm from the upper second corner to the bottom point of the rectangular cut. All lines are drawn by hand.
We cut out shelves for elastic bands in both parts of the belt. From the bottom corner of the rectangle we set aside approximately 0.2 cm for the half-circumference of the hips: 46 * 0.1 = 4.6 cm (rounded to 5).
The width of the second front part along the hip line is equal to half the semicircle of the waist - 36:2 = 18 cm.
To draw the shelves of the back half, measure 10 cm from the side line.
The width of the shelves at the bottom should be 5 cm or as wide as the elastic band itself sewn into the belt.
We measure 4 cm from the lower right corner of the rectangle, draw the bottom of our future belt by hand, adding 2 cm for the button fastener.
To give the product strength, we sew a strip of fabric onto the upper part of the belt from the wrong side.

How to sew a garter belt with your own hands?

This tutorial will help you sew a garter belt from a single piece of fabric. Thanks to the style, this product sits well on the hips. Let's start getting acquainted with this tailoring option:

We measure your waist or hips – it all depends on how high you want to wear this accessory.
We measure the previously measured measurement on paper with one horizontal line.
Draw a rectangle with the length of the previously measured measurement and a width of about 10-15 cm.
We form 4 triangles so that they are solid and we have one solid canvas. To do this, draw 2 triangles in front and two in back, leaving a flat central part. In a word, we lengthen the rectangular section with triangular additions. Here you can fantasize and modify the product. We get a one-piece stocking holder pattern, in which there are no separate parts.
Cut out the finished pattern and transfer it to the fabric
We cut off the parts we need from the drawstring (braid) to tuck in the whalebone.
We sew 4 pieces of braid vertically along the front part only, keeping a distance of 3-5 cm.

Important! It is very important to stitch only along one edge of the drawstring, since we will be putting whalebone into the other edge.

We insert the whalebone and sew up the second edge of the braid using a typewriter.
We trim all edges with tape. Now our belt has taken on the appearance of a corset.
We take the remaining tape in our hands, cut it into the pieces we need for the elastic bands, which will hold the stockings.
Sew the braid to the top of the solid triangles.
We take Velcro and sew it a few millimeters from the side edge of the product. We should have two Velcro strips that will secure the belt at the waist.
We make small bows from satin ribbon. We sew one on the front of the product in the center and the remaining four on the hanging braid.

The master class is over. The incredibly beautiful, and most importantly, durable belt is ready to begin its direct duties!

Where to buy accessories for stocking holders?

Where to buy and what are the correct names of the holders? I really want a handmade product to be beautiful and not much different from the purchased version. Beautiful accessories are the key to a good final result of the entire sewing process. Of course, special tapes can be replaced with a regular elastic band. But what about clamps and where to get them? We will talk about this further.

Here you will find absolutely any accessories. In stock you will find a large number of clips, various clips, fasteners, length adjusters and other additional details, including lace and elastic.

Important! Don't forget that metal clips will last much longer than plastic clips.

How to choose?

The basic rule of choice is that the belt should match the underwear. The simplest and most convenient solution is to buy a set of underwear, which includes a belt. The second option is to buy a belt and select underwear sets to go with it. Why not the other way around? Because there are many more models of underwear than belts, which means it will be much easier and faster to choose. In this case, the belt and underwear should match not only in color, but also in style, they should also have the same lace pattern as possible or the same print pattern. Examples of correct combinations can be seen in the photo below.

How to properly dress and wear a belt?

Oddly enough, there are girls who do not know how to dress correctly and what to wear with a stocking holder. Many people think that hosiery can be worn just like that. Yes, it's possible, but to make your man feel like putty in your hands, complement the look with a sexy lace garter belt. No man can resist such a temptress.

So, let's understand the question of how to put on such a product:

Your belt should completely match the color of your stockings, preferably everything should be from one set. If you purchased stockings separately and want to sew a belt with your own hands, then you can only take into account the color match and it is not necessary that the material of the two products match: the stockings can have a lace edge, and the belt can be made of textiles without trim.

Important! If you wear silk underwear, then the belt should also be made of silk or satin. Otherwise, the shine of one material will not be combined with a completely different fabric.

Before making a pattern, think about how often you will wear the belt. If you intend to use the product exclusively for romantic meetings with your loved one, then sew a belt with four fasteners. If you expect to wear the accessory almost every day, then you need to make more fasteners.
Wear the accessory so that it does not restrict or squeeze your waist and hips. In any case, a tight fastener can always be altered.
Adjust the garters so that they do not twist as you walk.
Such a product should go well not only with underwear, but also with the clothes you wear it under. For example, under a black dress, you should wear black stockings with a belt.
Do not use shorts with stockings and a belt. Thongs or bikinis are good for this.

Stockings, belt, panties: how to remove

Now that you have studied the theoretical part of the problem, you can move on to the practical. Despite the variety of garter belts, the first thing you have to do when you intend to remove women's panties yourself is to determine where exactly these panties are located: under the belt or above it. Already at this stage you may get confused, since the current fashion seems to be aimed at making your task as difficult as possible. Everything will get in your way: lace, ruffles, bows, beads and rhinestones, and possibly also ribbons and lacing! But we can offer you an algorithm that almost always works flawlessly!

Try to feel the belt clasp

So, we will proceed from the premise that the belt is worn over the panties, that is, the part we are interested in is hidden under it. If it is impossible to visually inspect the belt, then proceed by touch: run your hands along the belt from the front through the sides to the back. If your fingers are not closed on the belt clasp, you can repeat the action two or three times - the lady will consider them foreplay. But don’t get too hung up on it, otherwise you may be suspected of fetishism, and this is not always appropriate.

If the clasp is found, you can try to unfasten it. To do this, you need to grab the belt with your hands on both sides of the clasp and move it towards each other to loosen the tension. Next, proceed in the same way as when removing a bra.

Unfasten your stockings

Usually women, regardless of how panties with a belt are worn, when undressing, the first thing they do is unfasten and remove their stockings. Nowadays stockings are no longer what they used to be, and if your lady does not prefer vintage, then, most likely, she wears stockings with silicone, which perfectly stay on her legs without the help of a belt. Therefore, when you unfasten the elastic bands of the belt, the stockings will not fall to your feet, but will remain where they were.

If the stockings begin to slide down, the lady will panic - be prepared for such a turn of events, have an action plan in place for this eventuality, so as not to disrupt the romantic mood.

If you can't find the belt clasp...

If you couldn’t find the belt clasp or can’t unfasten it, still try to at least unfasten your stockings! This is difficult to do, since, let us remind you, each stocking is usually attached in at least two places, that is, you will have to work with two, six, four, or even eight fasteners! But, having unfastened the stockings, you will no longer be bothered by the need to remove the belt - it no longer stands in the way of your panties - take them off boldly - nothing is holding them in anymore!

If you only found panties...

then you can breathe a sigh of relief - they are worn over the belt, which means that they can be removed with a slight downward movement, without bothering yourself with preliminary manipulations with the belt and its fasteners.

We hope, dear men, that these instructions for handling garter belts have at least partially dispelled your fears of the female “tools” of your seduction. And remember that being able to put on and take off items of a woman’s wardrobe is not in all cases a shameful skill, but on the contrary...

On plump legs, stockings look defiantly erotic. Stockings on thin legs immediately make you want to read poetry. — Irina Pribora

DIY garter belt. Where to buy parts and accessories?

We recently watched a video on how to make a garter belt with your own hands. As it turned out, the matter is not so complicated. But the question arises, where to buy all the necessary components. As promised, I am writing a review on this topic.

Etsy is a real hardware paradise. There are many different types of belt clips, bra closures, length adjusters, and more common items like lace and elastic.

Let me remind you that it is better to take metal clips than plastic ones. These will last longer.

I’m ready to recommend a specific model that has clips on both sides. It can be attached to a belt, a corset, and panties. A huge plus is the large number of colors to choose from.

By the way, you can use it directly in this form if you suddenly change your mind about sewing a garter belt. All items from this store can be viewed here.

The second hot spot on Etsy is Porcelynne Lingerie and Sewing Supplies.

There's a good selection of clasps, a few holders and lots and lots of ribbon, lace and DIY sconce fittings.

Ebay has a large selection of suppliers with metal (and plastic) clamps of all types. Below are a few of them.

What are the stockings held on?

If you are puzzled about how to attach stockings to clips, first look at what will have to be attached to what and whether the stockings you like can even be worn with a belt. They are attached in two ways:

with elastic bands to the belt;
on silicone adhesive tapes.

Important! In the first case, you can’t do without suspenders, the second type of fastening is somewhat similar to what our grandmothers used, only they had thick elastic bands sewn into a ring, and you have modern ribbons. However, if you are wondering how to attach a belt to stockings with silicone, it is possible. You just need to insert the fasteners carefully, between the silicone strips, and secure the clamps well.

Why not order from Russian online stores?

Often such stores offer small wholesale. This is the first minus. The second follows from the first: few people ordered from such stores and there are practically no reviews about them. You will buy at your own peril and risk + it is not clear who would need 100 clips for a garter belt. The third disadvantage is the small selection and unsightly appearance.

I will still present a list of stores found, but keep in mind that they have not been verified.

A site with Protos accessories, where the belt clips were called the cute word “Stocking Holder” and Welltex with the only instance of the clip.