The grunge style is coming back into fashion, which means it’s time to find and take out an old piece of clothing from the closet and remake it into the most stylish thing of the coming seasons!
To make cuts with scuffs you will need:
- razor or blade;
- hard sandpaper;
- stationery knife or scissors.
First, try it on and, in the same way as described earlier, make approximate marks where the holes will be located and what size they will be. Then take them off, put some cardboard or plywood inside to protect the back of the pant leg, and get creative.
To begin with, you can use a stationery knife, scissors or a blade to make several (5 to 10) transverse cuts running at a certain distance from each other. After this, you need to pull out the longitudinal blue threads with tweezers so that only the transverse white threads remain. Some of the white threads can be cut out to make the holes appear larger. It is best to sand the edges of the slots so that they have an even more “worn” appearance. The main thing is to act quite carefully and not break the fragile transverse threads.
Do not miss
- Do not miss
How to choose women's jeans by body type and size: detailed instructions
You can complement the finished “decor” with the help of abrasions made with a razor. To do this, lightly wet and wring out the fabric, and then run it over it several times in the place where you want to place the abrasions. Periodically clean the blades of worn-out tissue. At the end, the item must be washed to consolidate the result.
This slightly sloppy and “rebellious” option goes well with things in casual and grunge styles.
How to choose the right place for a hole on jeans
“Measure twice, cut once” - this is the proverb that should be followed when choosing a location for a future cut. Remember that all actions will be irreversible! The most common places for holes in pants are:
- Back and front pockets.
- Knees.
- Hip.
It is very important not to overdo it! You should look sophisticated, not provocative. Try not to make many holes and cuts in one place. Much depends on the specific style of trousers. For example, a small hole at the knees is best done on dark and skinny jeans.
Preparatory stage
You can change the appearance of your trousers very simply; you will only need the usual means at hand. Take your old and worn pants and follow a few simple steps.
Trying on, choosing and designating the location for the hole
First of all, you should try on old things. This way, you can evaluate exactly how the pants will look after the transformation. Think in advance about what specific result you want to achieve. Much depends on the quality of the material, which reacts differently to cuts and damage.
The hole can become deformed and grow. When trying on, make sure where the cuts will be located. Consider not only the characteristics of your anthropometric data, but also the density of the material itself. Mark the area of future holes using white chalk, as it is clearly visible against any background.
Preparing the necessary tools and materials
There are several ways to make a cut on jeans. To do this, you must take the following available items:
- Large and manicure scissors.
- A brush.
- Sandpaper.
- Needle and tweezers.
- Stationery knife (alternative - blade).
- Material that can be placed under a trouser leg.
What will you need for work?
Before starting the work process, it is necessary to mark on the fabric the places where the holes will be located, as well as determine their number and shape . The appearance of clothing and wearing comfort depend on this.
Important! For many, it may seem that making a hole in denim trousers is easy. But if this procedure is carried out incorrectly, the product may turn out to be unoriginal and cause laughter among others.
There are several ways to decorate pants with slits, each of which differs in production technology and requires attention, as well as a certain amount of time. It is recommended to carry out the work using some tools that will help create the intended pattern on the pants, as well as design it effectively. Such devices include:
- manicure and large scissors;
- brush with metal teeth;
- sandpaper;
- tweezers;
- needle;
- chalk or marker;
- stationery knife or blade;
- wooden, plastic or cardboard lining.
Attention! In order not to touch the other side of the pants with a sharp object when making cuts, it is necessary to use a thick board, which will prevent such a problem and help make the hole of the desired shape.
Different Ways to Punch Holes in Jeans (with Instructions)
It is very important to choose the right solution to the problem. To implement the first method, you need to follow the exact algorithm of actions:
- First, you must place a small piece of cardboard under the target area.
- Make two neat cuts that should be parallel to the white threads.
- Take scissors, and then carefully pull out all the interfering threads (denim and white alternately).
The second method is slightly different. You are also recommended to place a plank and make transverse cuts. Cut the longitudinal threads with a blade. You also need to do some finishing on the edges. The third method is best done with a knife. It is suitable for those who want to radically change the appearance of their jeans. You must make several straight cuts at once. You can also take a large blade with a handle that has serrations. Put your jeans on, pull them down, carefully make a lot of horizontal cuts in one place, and then wash the pants.
Thin cobweb
Making holes in the knees so that they are covered with thin threads is not a difficult task, although, at first glance, it seems otherwise. Guided by certain rules for the manufacture of such parts, you can create a thin web on your trousers quite quickly. Let's look at how to rip jeans at the knees beautifully at home, with a step-by-step guide:
- On both legs, in the knee area, draw several transverse lines of varying lengths.
- Place a board inside each pant leg under the drawn lines.
- Use a sharp utility knife to make cuts along the drawn lines.
- On each resulting strip, use a needle or tweezers to pull out the blue threads, leaving the white ones intact.
If you wish, you can make not a full web on your jeans, but only a few alternating stripes.
How to make special holes with your own hands
Holes in jeans are a great chance to express yourself. You can do them in different ways. You can make changes with scissors, a razor or even a blade. The technique depends on where exactly you want to make the cut:
On the knees
It is very easy to create a hole in this place; it spreads instantly. Do all actions carefully and delicately. You are required to put on denim pants and then place a small dot in the center of your knee. The marking should be in the shape of an eye. The fabric must be cut strictly according to the markings applied.
Note! Regular sandpaper is not enough. Wet the area of the holes, roll some fabric into the middle, and then secure it with pins. Jeans should dry in this condition. You can also add small abrasions later.
Big size
Large holes are best done only in one specific place; there should not be many of them. Such incisions are most often made in the area of the knees or buttocks. During the creation process, it is enough to use ordinary scissors. Make a cross cut or cut out the fabric along all four edges.
Round
Circular cuts are not very common. They are done on the buttocks or thighs. An oval or circle should be drawn with chalk. It is best to take a regular cap and then circle it. Make cuts and then separate the threads with tweezers.
Additional decor
An interesting piece of clothing will be one where holes and abrasions are complemented by other decor. In this case, rhinestones are relevant. It is best to take artificial pebbles with adhesive base, which are glued to the fabric using a hot iron.
A variety of beads, buttons, seed beads, glass beads, and sequins are sewn on with regular matching threads. To avoid having to redo the work several times, lay out the pants (with the abrasions already made) on a flat surface, and place the decor on them, choosing the most suitable places for this. Mark these points with a pen or marker, and only then sew.
The combination of ripped jeans with lace is a romantic option. Light, light trousers, complemented with lace inserts, are also a beautiful option for summer. The lace should be dense, textured, and match the color of the fabric. Such pieces are sewn into fairly large holes with torn edges. The inside edges of the inserts can be reinforced with non-woven fabric. If you have artistic skills, you can use fabric markers to create a truly fantastic, unique item.
In order for the holes in the knees to take on a finished look and look organic, you need to wash your pants in the washing machine two or three times in the usual way. Thanks to this, the edges of the slots will fray as desired. Please note that due to this property, the hole will become wider with each subsequent wash. Therefore, you need to make it initially not too large. And one more thing: you can take worn jeans for alteration, but they should not be already worn out or stretched. Otherwise, you won’t get a beautiful thing, and it will last a couple of times.
The peculiarity of holes on different jeans
Much depends on the type of denim. On skinny jeans, the hole size that you would use on wide pants will not work. Also, a lot depends on the color of the fabric.
Black jeans
Such clothes look best with small holes in the knee area. Regular black pants are bland and too plain. Even a small cut will give you the opportunity to look more stylish and modern. It is best to select the width and location of the cut depending on the material.
Stretch jeans
Pants made from this fabric have several features. Remember that stretch stretches very well. The holes made in thick and skinny denim trousers will come apart over time. Do not make a large incision as it will expand to a large size in the future.
Which color is better?
Current fashion has made it possible to have not only blue or light blue jeans, but also any other shade. In this regard, many people have a question about whether the color of trousers is decisive when making holes in them.
There are some points to note. Actually, the color of jeans doesn't really affect the appearance of the holes made on them. Another thing is that colored trousers are sometimes not jeans at all, but are only called that by their owners out of habit. To form a beautiful flaw on trousers, the density and structure of the fabric are important, and therefore material with thin fibers will not be suitable.
When it comes to colored mid-weight jeans, small slits at the knees with minimal fringing and minor fraying will look great on them.
Also, some are concerned about the question of how to tear black jeans at the knees. In fact, making beautiful holes on black trousers is no different from similar work with blue or light blue ones.
How to make scuffs on jeans at home
Many men and women do not limit themselves only to holes. Carefully executed abrasions are an important element of the image of every young man. They are very easy to perform; all you need is a file, a kitchen grater or a manicure file. You must treat the target area of tissue with sharp and rhythmic movements.
The fabric will quickly lighten and become more worn out. Try to perform all movements carefully, make changes only in certain areas. All other fabric should be in its original appearance.
Note! It is very important to carefully control the entire process so that the jeans look beautiful. If you overdo it, your pants will look worn out.
