DIY king costume
To create a king’s New Year’s costume for your boy with your own hands, you need to know what main and additional parts it consists of.
This is what we will consider in our article. The king's carnival costume usually consists of:
- mantles;
- crowns;
- short pants;
- white shirt;
- short jacket;
- shoes or boots.
But the most necessary parts of this costume are the robe and the crown, and underneath you can wear a white shirt and black trousers.
Master class: how to sew a robe for a king’s costume for a child
You will need:
- fabric measuring 1m by 2m;
- sewing tools: threads, pins, needles, scissors.
Progress:
- To make a regular semicircle, attach a marker to a thread with a length equal to the width of the material exactly in the middle of the fabric.
- Stepping back 15 cm from the middle point on the top edge, we make a small semicircle.
- We cut the material along the drawn lines. Additionally, we cut strips 5 cm wide across the entire width of the fabric.
- We try on a strip of length for the child so that it is long enough to tie it around his neck. If the strip is very long, cut off the excess.
- We make a piping on one side of the strip; to do this, we bend it on one side by 0.5 cm and stitch it.
- Using pins, we secure the strip to the collar of the raincoat and attach it so that the edging made sticks out a little.
That's it, the cape is ready.
Once the robe is sewn, you can embroider any royal sign on the back.
Of course, for a king’s costume, it is better to make such a cloak from red fabric and sew white fur with black dots along the edge so that it looks like this:
For the convenience of sewing a robe for a king’s costume, you can use the following pattern:
Where:
- R1 is the length of the mantle, it depends only on you;
- R2 – neck circumference x 3.14.
Master class: how to make a crown for a king's costume
You will need:
- crocheted lace, the length we need;
- gelatin;
- bijouterie;
- silver or gold acrylic paint;
- a piece of cardboard or a small tube of hard paper;
- microwave;
- tools: brushes, plastic gloves, scissors, pencil, bowls, tape.
Progress:
- We cut the lace to the length we need, sew the ends together to make a ring and give it rigidity. To do this, pour 1-1.5 teaspoons of gelatin with warm water and leave to swell for 40-50 minutes. Then we heat this mass in a water bath and pour this solution into the lace for 20-30 minutes.
- We make a blank to stretch the lace: we cut a strip of cardboard 10 cm wide and the same length as the lace, and use tape to secure the ends to form a cylinder.
- Having put the lace on a paper cylinder, put it in the microwave for 30-40 seconds at maximum temperature, then take out the workpiece and apply another layer of gelatin. We repeat this action 7-8 times until the lace becomes stiff.
- Remove the lace from the cylinder and dry it again in the microwave (30 seconds).
- Apply the selected paint to the dried product with brushes and set it to dry, but not in the microwave, but simply on the windowsill.
- After the paint has dried well, decorate with light jewelry: a brooch, rhinestones, beads. The crown is ready!
You can complement the main elements of the costume by sewing wide lace, which is worn over the robe.
And decorating the child’s ordinary shoes with a bow to match the color of the main outfit.
When choosing the main fabric for making a suit for the king, you can take not only red fabric, but also gold, blue, and white. But for the crown and for additional elements (belts, ropes, lace, braid) you need to take gold color.
You can make other costumes with your own hands, for example, a knight or a pirate.
Source: https://womanadvice.ru/kostyum-korolya-svoimi-rukami
Making a crown
At a children's party, a boy's tsar costume cannot be imagined without a crown. The easiest way is to buy a ready-made one, but it will be much more interesting and useful for the child to make it himself (with the help of dad or mom). A crown can be made not only from cardboard or paper; felt is also suitable for these purposes. A beautiful product will complement the overall look and give the boy individuality and sophistication.
It is best to use cardboard for your work. It is denser and will hold its shape better. A great idea is to use a template or example of a beautiful product. The crown is decorated with artificial stones, which can be found in jewelry stores.
An excellent alternative to a crown can be a red hat, studded with the same artificial stones purchased at a sewing store.
How to sew a king's robe?
How to sew a king's robe?
- To do this, we need fabric one meter by two (1 m by 2 m). All the necessary tools. Threads, scissors, needles, pins. Draw a semicircle on the fabric, first stepping back from the top edge 15 cm in the middle. Cut along the line. The lines should be like this.
- I would make the mantle from velor, the edging could be made from fur. The collar can be sewn using the same pattern as the mantle, only shorter. Or you can cut the collar quot;jabotquot; and, to stand, insert the corsage. Decorate at your discretion with all sorts of stripes and stickers. And break it down something like this:
- One of the most important attributes of a king's costume is the robe.
The mantle is a wide, long cape, decorated with precious ermine fur.
How to make a king's robe?
We will need:
- thick red fabric;
- button or brooch;
- black acrylic paint;
- graph paper.
white faux fur;
- First you need to measure the circumference of your neck and the length of your robe. We make a pattern, draw a semicircle on graph paper, the radius of which is equal to the length of the product. From the same center we draw a second semicircle, the radius of which is equal to the circumference of the neck divided by twice the number.
- We cut out the mantle from red fabric, leaving 1.5 cm seam allowances for all cuts. We cut a cape from white faux fur (with seam allowances).
- We sew together all the details, sew on a fastener at the neck level in the form of an air loop with a large button. Or use a large brooch.
Prince in a beret with feathers
A fairly simple version of the headdress, which for some boys may be even preferable to a crown, is a luxurious beret with feathers. Be sure to make sure that you have fabric (its tone should match the tone of the suit and robe), feathers (they will be decorations) and brooches. The pattern is prepared in advance. After cutting out the paper parts, they are transferred to the fabric.
An indispensable attribute of the costume is the sword. The necessary materials for its manufacture are window glazing beads or wooden slats. For younger children, a cardboard sword is suitable (it is safer). We make a wooden blank (one meter is its minimum length). We clean it well with sandpaper and paint it with silver paint. We give the paint time to dry and decorate the sword. But first, let's add a handle. Take a plastic cover. A hole is made in it. Having put it on the sword, we tint it and let it dry.
We worked hard: the prince's costume turned out great. Available materials, a little time, a step-by-step diagram, your own imagination - and the child will definitely remember the New Year's performance.
How to make a king costume for a boy with your own hands
Preparing for the New Year is not only about endless shopping trips in search of special gastronomic delicacies for the holiday table, original items for gifts to family and friends, stunning clothes for the most magical evening of the year. Those who have children of different ages are concerned about another serious problem: carnival costumes for kindergarten and school parties.
Advantages of the image
So that you have at least one less thing to worry about, in this article we will think together and decide how you can sew or make a king’s costume for a boy from available materials.
What's so good about this outfit? It is equally suitable for a 4-5 year old child and a 12 to 14 year old teenager.
Important
That is, all mothers with sons, from the middle group of kindergarten to the 7th grade of high school, can gain a lot of useful information and take advantage of the ideas offered.
After all, a king’s costume for a boy is an ideal option for a truly bright, elegant, spectacular attire. In the romantic image of a young monarch, your child will feel comfortable, comfortable, and pleasant. And you can successfully use many of its details for your next carnival show.
Principle of analogy
Agree that the king’s costume for a boy is really similar to the outfits of a musketeer, a pirate, Puss in Boots, and the Marquis of Carabas. They require white shirts or blouses, lace shirtfronts and cuffs, capes, and over the knee boots.
Thus, having made one version of the New Year’s “outfit”, you can continue to use the existing developments.
So it turns out that a king’s costume for a boy is the ideal solution to the problem with a carnival costume in general for several years to come.
We think, discuss, propose
Of course, the easiest option is to buy all the necessary accessories in a regular store or order online. But even a thing chosen according to size often still has to be adjusted to fit a specific figure, and it does not always fit well. So let's try to make the king's costume with our own hands.
Its components: regular black trousers or sewn pantaloons, maybe knee-length or mid-calf pants, secured at the bottom with elastic bands and trimmed with lace. A white shirt, as an option - a mother’s or sister’s blouse with long sleeves.
It should be quite spacious, slouchy, therefore, you don’t need to sew it up much, since it will be tucked into your trousers.
If you are making a king's costume, sewn with your own hands, with short legs, you should take care of white knee socks (for a small child, tights are also suitable) and shoes with buckles or high boots. Plus, of course, a mantle (cloak), a crown or hat with a plume, a sword on a belt or in a sling.
Let's start with shoes
Homemade carnival costumes tend to be particularly challenging when it comes to shoes. With girls, however, it is easier in this matter. But we also solve it for the guys. Royal shoes can be black or dark brown.
If they are already old, well-worn, you can add shine by covering them with gold or silver foil - of course, this is for a king from a kindergarten. Be sure to make large buckles. You can use flexible wire to make blanks, which you then cover with golden fabric and attach to the shoes.
Advice
If royal carnival costumes require boots, we suggest doing so. Bring your child’s winter shoes (we are talking about boots and ankle boots, since other types are not suitable) to perfect cleanliness and shine; cover up any scuffs and other defects with cream or wax. Cut out the cuffs from cardboard, like over the knee boots.
Paint it with silver or bronze paint and attach it to your son’s boots. You can do this using double-sided tape.
Working with a cape
There is no king's New Year's costume for a boy without a cape. You can also sew it in different ways. This is either a long (almost to the toes) cape-cloak, trimmed along the collar, floors and bottom with ermine, or short, to the middle of the thighs. The color of the mantle can be blue, blue, red. As a rule, it should match the color of the pantaloons.
You can even use the same material - velvet, thick curtain silk or satin. The main condition is that the cape should look rich and elegant. The dimensions of the cloth are approximately 1-1.5 meters by 2. Having made a pattern and cut the material into blanks, sew the mantle with your hands or a machine and sew on the trim.
Instead of fur, a white edging is suitable, which can be corrected with a black felt-tip pen by applying “spots”. This is exactly the cape worn by most fairy-tale monarchs from films.
If mom knows how to sew and has some free time, the mantle can still be decorated with Christmas tree rain so that it gives more shine to His Majesty, because this is exactly the king’s carnival costume!
A few words about the crown
This is where no one should have any difficulties. Making a royal crown - what could be easier! Take a sheet of cardboard that is wide enough to fit around your head. You choose the height of the headdress yourself. Using a simple pencil, draw out the teeth, trying to make them the same.
And cut out the blank. Connect the ends into a circle with paper clips or glue. Paint the crown with bronze paint or cover it with foil. To make the king’s children’s costume have a more “regal” look, stick beads, rhinestones or pieces of rain onto the headdress.
note
If a wide-brimmed hat or a royal beret suits you more, take care to decorate them with a large brooch and feathers - one is enough for a beret; a larger plume is needed for a hat. You can buy feathers at a sewing accessories store. Or use lush Christmas tree rain instead.
To make fringe on the neckline, cuffs and bottom of the jacket:
– measure the length to form gathers, multiply it by 2-3, it all depends on the desired result, the higher the number, the more folds – measure the height we need, multiply it by 2 and plus allowances – cut out the resulting rectangle – For the neck and bottom you need to fold the fabric in half with the right side inward and stitch the sides, turn it out, make gathers to the desired length - For the cuff, first close the rectangle into a ring and only then fold the resulting part in half with the wrong side inward, make gathers to the desired length.
We attach the resulting parts to the cuffs, neck and bottom, respectively.
The jacket is ready, all that remains is to trim it with braid and sew on the buttons for the fastening.
I got this jacket for the prince, what it will be like for you depends only on your imagination.
And it seemed that such a difficult question as how to sew a New Year's one had already been successfully resolved. Next time we will do it for this costume too.
At every holiday there are beautiful princesses who cannot do without brave princes.
You can make your own prince costume for the New Year easily and in different ways. The first way: dress the boy in a regular classic suit with a bow tie and a crown. Or you can approach this issue more creatively and sew a unique outfit for the future heir to the throne.
We'll tell you how to make a royal outfit out of an ordinary shirt and sweatpants.
DIY New Year's costume for a boy
The New Year is approaching and that means it's time to prepare a fancy dress! This master class is dedicated to sewing a New Year's suit for a boy in the Greek style. You can sew such an unusual outfit for your child yourself, even without any tailor experience. All you have to do is follow the instructions and create!
This set includes: a Greek outfit-shirt, a laurel wreath and a belt.
To sew a New Year's suit (97 cm long) you will need:
- 1 meter of white crepe satin
- 3 meters of decorative narrow ribbon
- 60-70 cm thick (jacquard) tape for the belt
- 1 meter of gold crepe satin or brocade
- Threads, Velcro fastener.
Sequence of work:
1. In the picture you can see an approximate diagram of the future shirt.
Draw a pattern, taking into account the desired length, width and sleeve length.
Fold the fabric in half twice.
2. Pin the material with needles and cut out the parts. You will get two parts at once - the front and the back.
3.Sew the shoulder seams. Finish the neckline (in my case the neckline is a boat neckline and finished with a hemming foot).
4.Sew the side seams.
5. Finish the bottom edge of the shirt and sleeves using any available method: with a hemming foot or with an overlocker. Sew on decorative ribbon.
6.Now you will need gold cloth. Cut the material in half.
Stitch along the short side. You will get a long strip.
7. Finish the edge around the entire perimeter using the hemming foot.
8.Now sew the resulting rectangle to the middle seam of the sleeve on the shirt. Create neat folds.
9. This is what it looks like when finished.
10.We will make a belt from thick tape. Cut the ribbon to the required length and burn the edges so they don’t fray. Sew on the Velcro.
11. Finished costume.
Let's make a laurel wreath from paper:
12.Cut out double petals from golden crepe paper. Fold the paper in half to create double pieces.
13.Glue the petals together. Make half the petals gold and half white.
14.Alternating white and gold leaves, glue them together in a line.
15.Glue a satin ribbon on the wrong side, leaving 15-20 cm at the ends for tying.
16.This is what we got.
A children's New Year's suit for a boy is sewn within a day. Now your child is ready to show off at the party. Happy New Year and success in your creativity!
Especially for the site Handicraft Lessons Fount.
Source: https://xn—-htbdjdhckueqe7ag0q.xn--p1ai/novogodnij-kostyum-dlya-malchika-svoimi-rukami/
Step-by-step instruction
Here we will give instructions for a version of the costume of the fairy-tale Tsar Berendey. With minor variations, this costume can be adapted to other looks. Two elements will be described here: the mantle and the scepter.
Mantle:
- Prepare the original piece of fabric. The cut for the mantle is the simplest rectangular one - to suit the height of the child from the shoulders to the floor. Measure the required length.
- The pattern of a rectangular mantle is very simple: you just need to cut a notch for the head in the rectangle, and trim the lower part with an obtuse wedge.
The clasps for the mantle are made of leather. A turnstile button will be used as a fastening mechanism. Sew leather loops onto the mantle and install two button elements. Actions:
- Cut loops from a piece of leather (leather from old boots can be used) in two layers and sew them with coarse thread.
- Punch a hole in each loop; the button will be installed there.
- Sew fasteners onto the straight edges of the cloak on each side of the head and neck opening.
Then you can start making a staff (scepter). A wooden cutting will be used as the basis for it. Actions:
- Sand the cutting thoroughly.
- Apply varnish to give the wood a more noble look.
Equipment:
Overlock rating
The best overlockers for home and production according to customer reviews
Rating
More details
Sewing machine rating
The best sewing machines from budget to computerized
Rating
More details
DIY carnival costumes for teenagers and adults
We continue our review of nostalgic carnival costumes from the 1958 Housekeeping Encyclopedia.
This article is devoted to how to make carnival costumes for teenagers and adults with your own hands. As you will see later, there are no restrictions on creativity and you can literally build an original costume in an evening from materials available in every home. We wrote how to do this here.
Karabas Barabas
A hat made of cardboard or thick paper. A beard made of red, yellow or orange paper, cut into fringes, is attached to it with an elastic band (under the neck). Bunches of the same fringe can be attached to boots. Attach a feather to the hat.
Suit of Snow Maiden
Sew small cotton wool balls (snowflakes) onto the dress. Decorate the round white collar with white ribbons, silver Christmas tree thread and beads of different colors (from Christmas tree beads), sew the beads along the ribbons.
How to sew a finished white ribbon along the front of the dress. Trim white cuffs with Christmas tree trim. Attach a fringe to a kokoshnik made of white paper, along the bottom and top, and embroider it with silver Christmas tree thread, stars and Christmas tree beads of different colors. Sew linings cut out of white paper onto the stockings.
Santa Claus costume
A hat made of thick white paper is trimmed along the top and bottom edges with curled fringe. The top of the hat is made of colored bright paper. Attach a beard made from white paper washcloth or made according to Fig. to a hat with an elastic band, worn under the chin. 1.
Sew small cotton balls (snowflakes) onto a ski suit (preferably red or crimson). Make cuffs from paper with fringe and sew them to the sleeves of the jacket. Sew a collar of white paper with fringe to the collar of the jacket. In addition to the suit, you can make overlays for boots (under morocco boots).
Chess king
The suit can be yellow and black or black and yellow. Sweater, leggings and trousers of the same color (leggings can be replaced with long stockings). Sew black shiny ribbons onto yellow bloomers (if the bloomers are black, then the ribbons should be yellow).
Additionally, in the color of the suit, make shoulder pads, a peplum and a collar from thick paper or from double fabric, which should be stitched several times so that it sticks out. The peplum is poured onto the belt and worn with it. The cloak depicts a chessboard.
The headdress consists of 2 parts: a jagged crown and a pointed top. Attach a beard of m3 black paper to a hat with an elastic band (worn under the chin) (you can take paper from photographic envelopes). If the whole suit is black, then make the beard yellow. Cut the beard paper into narrow strips and curl it over a pencil.
Puss in Boots
Make stripes with gray paint on the forehead and sides of the mask (the cat’s face) and attach whiskers; in front, the mustache should lag behind the muzzle. Paint the nose drawn on the mask with pink paint or make it out of pink paper and glue it like an applique. Make the tail from white thick paper, glued in 2 layers.
A collar made of white corrugated paper, folded in half; thread a double thread along the top of the collar and pull it off.
Cut out the leggings that go with the boots from cardboard or thick paper, and cover them with paper in the color of the boots or red or yellow. Green colour; Trim the upper edge of the gaiter with paper lace.
Important
Attach a cardboard buckle with a bow to the front of the boot. Spurs are made from cardboard covered with foil.
Also attach gaiters made of thick white paper to the white gloves. The basis of the costume is a bright-colored ski jacket (red, blue or green), and decorate the trousers with ribbons attached along them (you can use ski pants, lifting them above the knees). The cloak is short - made from a piece of bright fabric.
Carnival costume of the devil
On black, dark gray or brown sweaters and leggings (leggings can be replaced with thick black tights) you need to sew tufts of “wool” from thick threads of gray, marsh green or reddish color.
Cover the wire tail with fabric in the color of the suit or stocking; attach a bun in the form of a large brush at the end (the tail is strengthened around the waist). The hooves and headdress are made in the same way as in a goat costume, but you can add a downward nose to the headdress. Cover the horns with silver foil. Eyes can be made from shiny foil.
Firebird
The main part of this costume is a headdress (made of thick yellow, pink or red paper) depicting a firebird.
King's Scepter
An important attribute of a king's costume for a boy is a scepter decorated with stones and gold. For this you will need a small stick, some foil and a lot of decorations.
First you need to make a small ball of paper. Roll the paper into a ball and wrap it in foil. Then do the same with the stick. Then secure the ball to one end of the stick and carefully wrap them together with several more layers of foil. Wrap until you are sure of the strength of the structure. Then there’s the small matter – decorations. Using a glue gun, glue lots of decorative rhinestones onto the scepter and its top. Lay out a pattern of beads and sequins. You can glue a small cross cut from silver or gold cardboard into the middle of the ball.
